Sony CPD-E500E: Adjusting the convergence (CONV) Adjusting the quality of the picture (SCREEN)

Adjusting the convergence (CONV)

Adjusting the quality of the picture

(SCREEN)

The CONV settings allow you to adjust the quality of the picture

by controlling the convergence. The convergence refers to the

The SCREEN settings allow you to adjust the quality of the

alignment of the red, green, and blue color signals.

picture by controlling the moire and landing.

If you see red or blue shadows around letters or lines, adjust the

• If the color is irregular at the corners of the screen, adjust the

convergence.

landing.

These settings are stored in memory for all input signals.

• If elliptical or wavy patterns appear on the screen, cancel the

moire.

1

Press the center of the control button.

The CANCEL MOIRE and MOIRE ADJUST settings are stored

The main MENU appears on the screen.

in memory for the current input signal. All other settings are

stored in memory for all input signals.

2

Move the control button to highlight CONV and

press the center of the control button again.

1

Press the center of the control button.

The CONVERGENCE menu appears on the screen.

The main MENU appears on the screen.

3

First move the control button m/M to select the

2

Move the control button to highlight SCREEN

desired adjustment item. Then move the control

and press the center of the control button again.

button </, to make the adjustment.

The SCREEN menu appears on the screen.

Select To

3

First move the control button m/M to select the

horizontally shift red or blue shadows

desired adjustment item. Then move the control

button </, to make the adjustment.

vertically shift red or blue shadows

vertically shift red or blue shadows at

Select To

TOP

V CONVER TOP

the top of the screen

reduce any color irregularities in the

GB

vertically shift red or blue shadows at

LANDING

screen’s top left corner to a minimum.

BOT

V CONVER

the bottom of the screen

reduce any color irregularities in the

BOTTOM

LANDING

screen’s top right corner to a

minimum.

reduce any color irregularities in the

LANDING

screen’s bottom left corner to a

minimum.

reduce any color irregularities in the

LANDING

screen’s bottom right corner to a

minimum.

turn the moire cancellation function

CANCEL MOIRE

*

ON or OFF.

(MOIRE ADJUST) appears in

the menu when you select ON.

adjust the degree of moire

MOIRE ADJUST

cancellation until the moire is at a

minimum.

* Moire is a type of natural interference which produces soft, wavy lines

on your screen. It may appear due to interference between the pattern

of the picture on the screen and the phosphor pitch pattern of the

monitor.

Example of moire

Note

The picture may become fuzzy when CANCEL MOIRE is set to ON.

11