Sony CPD-E500E: Additional settings (OPTION)

sRGB mode

Additional settings (OPTION)

The sRGB color setting is an industry standard color space

protocol designed to correlate the displayed and printed colors of

You can manually degauss (demagnetize) the monitor, change the

sRGB compliant computer products. To adjust the colors to the

menu position, and lock the controls.

sRGB profile, simply select the sRGB mode in the COLOR menu.

However, in order to display the sRGB colors correctly (γ=2.2,

1

Press the center of the control button.

6500K), you must set your computer to the sRGB profile and

The main MENU appears on the screen.

adjust the brightness ( ) and contrast (6) to the numbers shown

in the menu. For information on how to change the brightness

2

Move the control button to highlight OPTION and

( ) and contrast (6), see page 9.

press the center of the control button again.

The OPTION menu appears on the screen.

Note

Your computer and other connected products (such as a printer), must be

3

Move the control button m/M to select the desired

sRGB compliant.

adjustment item.

COLOR

Adjust the selected item according to the following

EASY EXPERT s BGR

instructions.

:56 :76 FOR s BGR

Degaussing the screen

The monitor is automatically demagnetized (degaussed) when the

power is turned on.

To manually degauss the monitor, first move the

control button m/M to select (DEGAUSS). Then move

the control button ,.

The screen is degaussed for about 2 seconds. If a second degauss

cycle is needed, allow a minimum interval of 20 minutes for the

best result.

GB

Changing the menu’s position

Change the menu’s position if it is blocking an image on the

screen.

To change the menu’s on-screen position, first move

the control button m/M to select (OSD H POSITION)

for horizontal adjustment, or (OSD V POSITION) for

vertical adjustment. Then move the control button

</, to shift the on-screen menu.

Locking the controls

To protect adjustment data by locking the controls, first

move the control button m/M to select (CONTROL

LOCK). Then move the control button ,, to select ON.

Only the 1 (power) switch, EXIT, and (CONTROL LOCK)

of the OPTION menu will operate. If any other items are

selected, the mark appears on the screen.

To cancel the control lock

Repeat the procedure above and set (CONTROL LOCK) to OFF.

13