Sony CPD-E500E: Adjusting the brightness and contrast

x

xx

x

Using the control button

Adjusting the brightness and

1

Display the main MENU.

contrast

Press the center of the control button to display the main

MENU on your screen.

Brightness and contrast adjustments are made using a separate

BRIGHTNESS/CONTRAST menu.

MENU

These settings are stored in memory for all input signals.

1

Move the control button in any direction.

The BRIGHTNESS/CONTRAST menu appears on the

screen.

2

Select the menu you want to adjust.

Highlight the desired menu by moving the control button

towards the rear to go up (M), towards the front to go down

(m), and left (<) or right (,) to move sideways.

FRONT

2

Move the control button m/M to adjust the

MENU MENU

brightness ( ), and </, to adjust the contrast

(6).

If you are using the sRGB mode

If you selected the sRGB mode in the COLOR menu, the

following BRIGHTNESS/CONTRAST menu appears on the

screen.

REAR

GB

3

Adjust the menu.

Move the control button left (<) or right (,) to make the

adjustment.

MENU

For more information about using the sRGB mode, see

“Adjusting the color of the picture (COLOR)” on page 12.

The menu automatically disappears after about 3 seconds.

4

Close the menu.

Press the center of the control button once to return to the

main MENU, and twice to return to normal viewing. If no

buttons are pressed, the menu closes automatically after about

30 seconds.

MENU

x

xx

x

Resetting the adjustments

Press the RESET button. See page 14 for more information on

resetting the adjustments.

RESET

9