Yamaha KMA-500: SETUP MODE

SETUP MODE

You can set the following menu in Setup mode:

2. Input mode

• Power ON recall

Set Input mode to Auto or Manual.

• Input mode

Auto*: The input source is set automatically.

• Auto input condition

Manual: The input source is selected by INPUT.

•Enable remote

Source is selected in order of DVD, AUX**, TAPE,

• Remote mode

BGM.

• MIC/MUSIC max level

3. Auto input condition

• MIC/MUSIC volume select

Set the conditions for each source (DVD, AUX** and

• Initializing

TAPE) for Auto Input mode described in 2.

To set each menu above, set the corresponding controls as

Audio*: The source is switched based on audio signal.

shown in the “Setup mode table” on page 15 according to

Video: The source is switched based on video signal.

the following procedure.

Audio/Video: The source is switched based on audio or

video signal.

1 To enter Setup mode, turn off the main unit

For only this menu, select desired source by INPUT

and press POWER while pressing KEY

before selecting the desired item.

CONTROL and ECHO MODE.

4. Enable remote

Enable or disable remote control.

Enable*: The remote control is enabled.

Disable: The remote control is disabled.

5. Remote mode

Set the light receiving device.

Front&Ext.*: Both the front panel and external remote

control satellite receive the signal from the remote control.

2 Set KEY CONTROL and MUSIC according to

Front: Only the front panel receives the signal.

the “Setup mode table” on page 15 to set

Ext.: Only the external remote control satellite receives

desired menus and items.

the signal.

For Auto input condition, select the desired source

6. MIC/MUSIC max level

before selecting the item.

Set the maximum volume of MIC and MUSIC.

Set all settings you want to change before moving to

10*: No setting.

step 3.

9 to 3: The maximum volume is set to the level indicated

(2 to 0 cannot be set).

3 Press KEY CONTROL to enter the settings.

7. MIC/MUSIC volume select

Select how MIC and MUSIC volumes increase/decrease

(i.e., the volume curve) when the controls are turned.

Pattern 1*: Steep curve

Pattern 2: Less steep curve

Pattern 3: Least steep curve, and is most suitable for fine

adjustment.

“ ” blinks once when the settings are entered.

8. Initializing

Reset all the settings set in Setup mode to the defaults.

4 To terminate Setup mode, turn off the main

Cancel: Initializing is not executed.

unit.

Initialize: Initializing is executed.

When pressing KEY CONTROL with MUSIC set to 3,

■ Menus in Setup mode

Initializing is executed.

1. Power ON recall

Select Last memory or Preset, to recall the settings of MIC

volume/ECHO amount/MUSIC volume/ECHO MODE

when the unit is turned on.

* Default setting

Last memory*: The settings when the unit was turned off

** KMA-700 only

last are recalled.

Preset: The settings saved to PRESET 1 are recalled.

14 En

SETUP MODE

■ Setup mode table

Menu KEY CONTROL Items/MUSIC

1. Power ON recall

+1 Last memory: 1 Preset: 2

2. Input mode

+2 Auto: 1 Manual: 2

3. Auto input condition

+3

Select desired source

by INPUT.

Example: DVD

OPERATION

Audio: 1 Video: 2 Audio/Video: 3

4. Enable remote

+4 Enable: 1 Disable: 2

5. Remote mode

+5 Front&Ext.: 1 Front: 2 Ext.: 3

6. MIC/MUSIC max

–1

No setting: 10 Set to the indicated level: 9 to 3

level

Example: 3

7. MIC/MUSIC volume

–2

Pattern 1: 1 Pattern 2: 2 Pattern 3: 3

select

8. Initializing

–5

Cancel: 1 Initialize: 3

English

15 En