JVC KS-FX815: SPECIFICATIONS

SPECIFICATIONS

AUDIO AMPLIFIER SECTION

CASSETTE DECK SECTION

Maximum Power Output:

Wow & Flutter: 0.11% (WRMS)

Front: 45 W per channel

Fast-Wind Time: 100 sec. (C-60)

Rear: 45 W per channel

Frequency Response (Dolby B NR OFF):

Continuous Power Output (RMS):

30 Hz to 16 000 Hz (Normal tape)

ENGLISH

Front: 17 W per channel into 4 Ω, 40 Hz

Signal-to-Noise Ratio: (Normal tape)

to 20 000 Hz at no more than

(Dolby B NR ON): 65 dB

0.8% total harmonic distortion.

(Dolby B NR OFF): 56 dB

Rear: 17 W per channel into 4 Ω, 40 Hz

Stereo Separation: 40 dB

to 20 000 Hz at no more than

0.8% total harmonic distortion.

Load Impedance: 4 Ω (4 Ω to 8 Ω allowance)

GENERAL

Tone Control Range:

Power Requirement:

Bass: ±10 dB at 100 Hz

Operating Voltage: DC 14.4 V

Treble: ±10 dB at 10 kHz

(11 V to 16 V allowance)

Frequency Response: 40 Hz to 20000 Hz

Grounding System: Negative ground

Signal-to-Noise Ratio: 70 dB

Allowable Operating Temperature: 0°C to +40°C

Line-Out Level/Impedance:

Dimensions (W × H × D):

2.0 V/20 kΩ load (250 nWb/m)

Installation Size: 182 mm × 52 mm × 150 mm

Panel Size: 188 mm × 58 mm × 14 mm

Mass: 1.4 kg (excluding accessories)

TUNER SECTION

Frequency Range:

FM1/FM2: 87.5 MHz to 108.0 MHz

FM3: 65 MHz to 74 MHz

AM: (MW) 522 kHz to 1

620 kHz

Design and specifications subject to change without

(LW) 144 kHz to 279 kHz

notice.

[FM Tuner]

Usable Sensitivity: 11.3 dBf (1.0 µV/75 Ω)

50 dB Quieting Sensitivity:

16.3 dBf (1.8 µV/75 Ω)

Alternate Channel Selectivity (400 kHz):

65 dB

Frequency Response: 40 Hz to 15000 Hz

Stereo Separation: 30 dB

Capture Ratio: 1.5 dB

[MW Tuner]

Sensitivity: 20 µV

Selectivity: 35 dB

[LW Tuner]

Sensitivity: 50 µV

35

EN33-35.KS-FX915R/815[EE]/f 00.12.12, 5:47 PM35