JVC KS-FX815: SOUND ADJUSTMENTS

SOUND ADJUSTMENTS

Adjusting the sound

2

Adjust the level.

To increase the level.

You can adjust the sound characteristics to your

preference.

ENGLISH

1

Select the item you want to adjust.

To decrease the level.

Each time you press the button,

the adjustable items change as

follows:

BAS

TRE

FAD

(bass)

(treble)

(fader)

Equalization pattern changes as you adjust the

VOL

LOUD**

BAL

bass or treble.

(volume)

(loudness)

(balance)

Note:

Normally, the control dial works as the volume

Indication To do: Range

control. So you do not have to select “VOL” to adjust

BAS Adjust the bass. –06 (min.)

the volume level.

|

+06 (max.)

TRE Adjust the treble. –06 (min.)

Turning on/off the loudness

|

+06 (max.)

function

FAD* Adjust the front R06 (Rear only)

(only for KS-FX815)

and rear speaker |

balance. F06 (Front only)

LOUD

The human ear is less sensitive to

BAL Adjust the left L06 (Left only)

low and high frequencies at low

and right speaker |

volumes. The loudness function can

balance. R06 (Right only)

boost these frequencies to produce

LOUD** Boost low and high

a well-balanced sound at low

(only for frequencies to

LOUD ON

volume levels.

KS-FX915R

) produce a well-

Each time you press LOUD, the

|

balanced sound

loudness function turns on/off

at low volume

LOUD OFF

alternatively.

level.

VOL Adjust the volume. 00 (min.)

|

50 (max.)

* If you are using a two-speaker system, set the fader

level to “00.”

**only for KS-FX915R

19

EN19-21.KS-FX915R/815[EE]/f 00.12.25, 11:43 AM19

Indication For: Preset values

Using the sound control memory

BAS TRE LOUD

BEAT Rock or disco +02 00 ON

You can select and store a preset sound

music

adjustment suitable for each playback source

(Advanced SCM).

SOFT Quiet +01 –03 OFF

ENGLISH

background

music

Selecting and storing the sound modes

POP Light music +04 +01 OFF

Once you select a sound mode, it is stored in

SCM OFF (Flat sound) 00 00 ON

memory. It will be recalled every time you select

the same source and will be shown on the display.

A sound mode can be stored for each of the

Recalling the sound modes

following sources — FM1, FM2, FM3, AM, tape

and external components.

When “SCM LINK” is set to “LINK ON,”

• If you do not want to store the sound mode

select the source.

separately for each playback source, but want

to use the same sound mode for all the sources,

see “To cancel Advanced SCM – SCM LINK” on

page 24.

Each time you change the

Select the sound mode you want.

playback source, the SCM

indicator flashes on the display.

The sound mode stored in memory for the

selected source is recalled.

Ex.: When you select “BEAT”

Notes:

Each time you press the button, the sound mode

• You can adjust each sound mode to your preference,

changes as follows:

and store it in memory.

If you want to adjust and store your original sound

SCM OFF

mode, see “Storing your own sound adjustments”

(BEAT) (SOFT) (POP)

on page 21.

• To adjust the bass and treble reinforcement levels or

• When “SCM LINK” is set to “LINK ON,” the

to turn on/off the loudness function temporarily, see

selected sound mode can be stored in memory

page 19. (Your adjustments will be canceled if

for the current source and the effect applies only

another source is selected.)

to the current source. Each time you change the

playback source, the SCM indicator flashes on

the display.

• When “SCM LINK” is set to “LINK OFF,” the

selected sound mode effect applies to any source.

20

EN19-21.KS-FX915R/815[EE]/f 00.12.13, 11:08 AM20

Storing your own sound

4

Repeat steps 2 and 3 to adjust the

other items.

adjustments

5

Press and hold SCM until the sound

You can adjust the sound modes (BEAT, SOFT,

mode you have selected in step 1

POP) to your preference and store your own

ENGLISH

adjustments in memory.

flashes on the display.

• There is a time limit in doing the following

procedure. If the setting is canceled before you

finish, start from step 1 again.

1

Call up the sound mode you want to

adjust.

Your adjustment made for the

• See page 20 for details.

selected sound mode is stored in

memory.

6

Repeat the same procedure to store

other sound modes.

Ex.: When you select “BEAT”

To reset to the factory settings

2

Select “BAS” (bass), “TRE” (treble) or

Repeat the same procedure and reassign the

“LOUD” (loudness).

preset values listed in the table on page 20.

(For KS-FX815)

LOUD

Ex.: When you adjust “TRE” (treble)

3

Adjust the bass or treble level or turn

the loudness function ON/OFF.

• See page 19 for details.

(For KS-FX815)

LOUD

Equalization pattern changes as you adjust the

bass or treble.

21

EN19-21.KS-FX915R/815[EE]/f 00.12.13, 11:08 AM21