JVC KS-FX815: OTHER MAIN FUNCTIONS

OTHER MAIN FUNCTIONS

To check the current clock time while the unit

Setting the clock

is turned off, press DISP (display).

You can also set the clock system to either 24 hours

The power turns on, the clock time is shown for 5

seconds, then the power turns off.

or 12 hours. (only for KS-FX915R)

ENGLISH

1

Press and hold SEL (select) for more

than 2 seconds so that one of the PSM

Changing the general settings

items appears on the display.

(PSM)

(See page 23.)

You can change the items listed on the next page

by using the PSM (Preferred Setting Mode) control.

Basic Procedure

1

Press and hold SEL (select) for more

2

Set the hour.

than 2 seconds so that one of the PSM

1 Select “CLOCK H” if not shown on the

items appears on the display.

display.

(See page 23.)

2 Adjust the hour.

1

2

2

Select the PSM item you want to

3

Set the minute.

adjust. (See page 23.)

1 Select “CLOCK M.”

2 Adjust the minute.

1

2

3

Adjust the PSM item selected.

4

Set the clock system.

(only for KS-FX915R)

1 Select “24H/12H.”

2 Select “24H” or “12H.”

1

2

4

Repeat steps 2 and 3 to adjust the

other PSM items if necessary.

5

Press SEL (select) to finish the setting.

5

Press SEL (select) to finish the setting.

22

EN22-25.KS-FX915R/815[EE]/f 00.12.12, 5:42 PM22

Preferred Setting Mode (PSM) items

1

2

3

Factory-preset

See

ENGLISH

Set.

settings

page

Counter-

Select.Hold.

clockwise

Clockwise

CLOCK H Hour adjustment

AdvanceBack

0:00 22

CLOCK M Minute adjustment

Back Advance

SCM LINK Sound control

LINK OFF

LINK ON

20, 24LINK ON

memory linkage

24H/12H* 24/12-hour time

12H

24H

24H

22

display

AUTO ADJ* Automatic clock

OFF

ON

ON

14

setting

CLOCK* Clock display

OFF

ON

ON

24

TU DISP* Tuner display

FREQ PS NAME

PS NAME

14

PTY STBY* PTY standby

NEWS

29 programme types

12

PTY SRCH* PTY search

(see pages 12 and 15.)

(See page 12.)

12

TA VOL* Traffic announcement

VOL 00 – VOL 50

14VOL 20

volume

P-SEARCH* Programme search

OFF

ON

OFF

13

1

DAB AF*

Alternative frequency

AF ONAF OFF

32AF ON

search

AUDIO 1

AUDIO 2

LEVEL Level display

AUDIO 2 24

OFF

AUTO

OFF

DIMMER* Dimmer mode

AUTO 24

ON

MUTING 1

MUTING 2

TEL Telephone muting

OFF 24

OFF

BEEP* Key-touch tone

OFF

ON

ON

24

B. SKIP Blank skip

OFFOFF ON

18

EXT IN** External component

CHANGER LINE IN

CHANGER

24, 28

• Press SEL (select) to finish the setting.

* These functions are applicable only to KS-FX915R.

1

*

Displayed only when the DAB tuner is connected.

** Displayed only when one of the following sources is selected – FM, AM and Tape.

23

EN22-25.KS-FX915R/815[EE]/f 00.12.12, 5:42 PM23

To cancel Advanced SCM – SCM LINK

Note:

Auto Dimmer equipped with this unit may not work

You can cancel the Advanced SCM (Sound Control

correctly on some vehicles, particularly on those

Memory), and unlink the sound modes and the

having a control dial for dimming.

playback sources.

In this case, set the dimmer mode to “ON” or “OFF.”

When shipped from the factory, a different sound

ENGLISH

mode can be stored in memory for each source so

that you can change the sound modes simply by

To select the telephone muting – TEL

changing the sources.

This mode is used when a cellular phone system is

connected. Depending on the phone system used,

• LINK ON: Advanced SCM (different sound

select either “MUTING 1” or “MUTING 2,” whichever

modes for different sources).

mutes the sounds from this unit.

• LINK OFF: Conventional SCM (one sound mode

When shipped from the factory, this mode is

for all sources).

deactivated.

To set the clock display – CLOCK

• MUTING 1: Select this if this setting can mute

(Only for KS-FX915R)

the sounds.

• MUTING 2: Select this if this setting can mute

You can set the clock to be shown on the display

the sounds.

when the unit is turned on.

• OFF: Cancels the telephone muting.

When shipped from the factory, the clock is set to

be shown on the display.

To turn on/off the key-touch tone – BEEP

• ON: Clock display is turned on.

(Only for KS-FX915R)

• OFF: Clock display is turned off. When

You can deactivate the key-touch tone if you do not

“OFF” is selected, the current source

want it to beep each time you press a button. When

name or station band appears

shipped from the factory, the key-touch tone is

instead of the clock

display (except

activated.

when

“EXT–LINE IN” is selected as

the source).

• ON: Activates the key-touch tone.

• OFF: Deactivates the key-touch tone.

To select the level meter – LEVEL

You can select the level display according to your

To select the external component to use

preference.

– EXT IN

When shipped from the factory, “AUDIO 2” is

You can connect the external component to the CD

selected.

changer jack on the rear using the Line Input Adaptor

• AUDIO 1:

Level meter illuminates from bottom

KS-U57 (not supplied).

to top.

To use the external component as the playback

• AUDIO 2:

Alternates level meter (moves from

source through this unit, you need to select which

bottom to top) and illumination display.

component – CD changer or external component

• OFF:

Erases the audio level indicator.

– to use.

When shipped from the factory, CD changer is

selected as the external component.

To select the dimmer mode – DIMMER

(Only for KS-FX915R)

• LINE IN: To use the external component other

than CD changer.

When you turn on the car head lights, the display

• CHANGER: To use the CD changer.

automatically dims (Auto Dimmer.)

When shipped from the factory, Auto Dimmer

Note:

mode is activated.

For connecting the Line Input Adaptor KS-U57 and the

• AUTO: Activates Auto Dimmer.

external component, refer to the Installation/Connection

• OFF: Cancels Auto Dimmer.

Manual (separate volume).

• ON: Always dims the display.

24

EN22-25.KS-FX915R/815[EE]/f 00.12.12, 5:42 PM24

Attaching the control panel

Detaching the control panel

1

Insert the right side of the control panel

You can detach the contol panel when leaving the

car.

into the groove on the panel holder.

When detaching or attaching the control panel,

ENGLISH

be careful not to damage the connectors on the

back of the control panel and on the panel holder.

Detaching the control panel

Before detaching the control panel, be sure to turn

off the power.

2

Press the left side of the control panel

1

Unlock the control panel.

to fix it to the panel holder.

2

Pull the control panel out of the unit.

Note on cleaning the connectors:

If you frequently detach the control panel, the

connectors will deteriorate.

To minimize this possibility, periodically wipe the

connectors with a cotton swab or cloth moistened

with alcohol, being careful not to damage the

connectors.

3

Put the detached control panel into the

provided case.

Connectors

25

EN22-25.KS-FX915R/815[EE]/f 00.12.12, 6:38 PM25