JVC KD-SC607: SOUND ADJUSTMENTS

1

*

When you adjust the bass, treble, or loudness, the

Adjusting the sound

adjustment you have made is stored for the

currently selected sound mode (C-EQ) including

You can adjust the sound characteristics to your

“USER.”

preference.

2

*

If you are using a two-speaker system, set the fader

ENGLISH

level to “00.”

1

Select the item you want to adjust.

3

*

Normally the control dial work as the volume

Each time you press the

control. So you do not have to select “VOL” to

button, the adjustable items

adjust the volume level.

change as follows:

4

*

Depending on the amplifier gain control setting.

(See page 34 for details.)

BAS

TRE

FAD

2

Adjust the setting.

(bass)

(treble)

(fader)

To increase the level or

VOL

LOUD

BAL

(volume)

(loudness)

(balance)

turn on the loudness

To decrease the level or

Indication To do: Range

turn off the loudness

1

BAS*

Adjust the bass. –06 (min.)

|

Indication pattern changes as

+06 (max.)

you adjust the bass or treble.

1

TRE*

Adjust the treble. –06 (min.)

|

+06 (max.)

2

FAD*

Adjust the front R06 (Rear only)

Ex. 1: When you adjust “TRE” (treble)

and rear speaker |

balance. F06 (Front only)

BAL Adjust the left L06 (Left only)

and right speaker |

balance. R06 (Right only)

1

Ex. 2: When you turn on the loudness

LOUD*

Boost low and

high frequencies LOUD ON

to produce a well- |

3

Repeat steps

1

and

2

to adjust the

balanced sound LOUD OFF

other items.

at low volume

level.

3

VOL*

Adjust the volume. 00 (min.)

To reset each sound mode to the factory

|

settings, repeat the same procedure and

4

30 or 50 (max.)*

reassign the preset values listed in the table on

page 29.

30

EN29-30_KD-SC607[EE]f.p65 11/27/03, 12:19 PM30