Главная > Инструкция к Автомагнитоле JVC KD-SC607 > MP3/WMA OPERATIONS

JVC KD-SC607: MP3/WMA OPERATIONS

MP3/WMA OPERATIONS: JVC KD-SC607

MP3/WMA OPERATIONS

ENGLISH

Refer also to “CD OPERATIONS” on pages

The display changes to show the following:

20 to 23.

CD indicator

Playing a disc

1

Open the control panel.

Current source indication

Note on One-Touch operation:

WMA or MP3 indicator*

When a disc is already in the loading slot,

pressing CD CD-CH turns on the unit and starts

playback automatically.

2

Insert a disc into the loading slot.

Total folder

Total file

The unit turns on,

number

number

draws the disc and

starts playback

Ex.: When the disc contains 19 folders and

automatically.

144 MP3/WMA files

* WMA or MP3 indicator lights up depending on the

3

Close the control panel by hand.

first detected file.

Notes:

• MP3/WMA discs require a longer readout time.

(It differs due to the complexity of the folder/file

configuration.)

All files will be played repeatedly until you

• When playback starts, folder and file names (or ID3

stop playback.

tags) will automatically appear. (See also page 26.)

• If you change the source or turn the power off, disc

playback stops (without ejecting the disc).

Next time you select the CD player as the source or

turn the power on, disc play starts from where

playback has been stopped previously.

25

EN25-28_KD-SC607[EE]f.p65 11/27/03, 12:19 PM25

To stop play and eject the disc

Notes:

• The display shows up to 8 characters at a time and

Press 0.

scrolls if there are more than 8 characters.

Playback stops and the control panel flips down.

See also “To select the scroll mode—SCROLL” on

The disc automatically ejects from the loading slot.

page 33.

ENGLISH

• When folder or file name is shown, current folder

To change the display information

number or the Tr indicator and current file number

While playing back an MP3/WMA file, you can

also appear on the right side of the display.

change the disc information shown on the display.

Press DISP (display) repeatedly.

Each time you press the button,

Locating a file or a particular

the display changes to show the

portion on a disc

following:

To fast-forward or reverse the file

• When “TAG DISP” is set to “TAG ON”

(initial setting: see page 34)

Press and hold ¢

while playing a disc, to fast-

forward the file.

Album name / performer

(folder name*)

(TAG lights up on the display)

Press and hold 4 while playing a disc, to

reverse the file.

Track title (file name*)

(TAG lights up on the display)

Note:

During this operation, you can only hear intermittent

Elapsed playing time and

sounds. (The elapsed playing time also changes

Current file number

intermittently on the display.)

Clock and

Current file number

To skip to the next or previous files

Press ¢ briefly while

* If ID3 tags are not recorded, folder name and

playing, to skip ahead to

file name appear. In this case, the TAG indicator

the beginning of the next

will not light up on the display.

file.

Each time you press the

button consecutively, the

• When “TAG DISP” is set to “TAG OFF”

beginning of the next files is

located and played back.

Folder name

( lights up on the display)

Press 4 briefly, while playing, to skip back

File name

to the beginning of the current file.

( lights up on the display)

Each time you press the button consecutively,

the beginning of the previous files is located and

Elapsed playing time and

played back.

Current file number

Clock and

Current file number

26

EN25-28_KD-SC607[EE]f.p65 11/27/03, 12:19 PM26

To go to a particular file quickly within the

To go to a particular folder directly

current folder (+10 and –10 buttons)

IMPORTANT:

1 Press M MODE to enter the functions mode

To directly select the folders using the number

while playing a disc.

button(s), it is required that folders are

ENGLISH

assigned 2 digit numbers at the beginning of

their folder names. (This can only be done

during the recording of CD-Rs or CD-RWs.)

Ex.: If folder name is “01 ABC”

2 Press +10 or –10.

= Press 1 to go to Folder 01 ABC.

If folder name is “1 ABC,” pressing 1

To skip 10 files* forwards to

does not work.

the last file

If folder name is “12 ABC”

= Press and hold 6 (12) to go to Folder

To skip 10 files* backwards to

12 ABC.

the first file

Press the number button corresponding to the

* First time you press +10 or –10 button, the

folder number to start playing the first file in the

file skips to the nearest higher or lower file

selected folder.

with a file number of multiple ten (ex. 10th,

20th, 30th).

Then each time you press the button, you can

skip 10 files (see “How to use the +10 and

–10 buttons” below).

• After the last file, the first file will be selected,

• To select a folder number from 01 – 06:

and vice versa.

Press 1 (7) – 6 (12) briefly.

• To select a folder number from 07 – 12:

Press and hold 1 (7) – 6 (12) for more than one

How to use the +10 and –10 buttons

second.

• Ex. 1: To select file number 32 while playing

file number 6

Notes:

• If indicator flashes on the display after you

have selected a folder, it means that the folder does

not contain any MP3/WMA files.

(Three times) (Twice)

• You cannot directly select a folder with a number

greater than 12.

File 6 \ 10 \ 20 \ 30 \ 31 \ 32

To select a particular file in a folder, press

• Ex. 2 : To select file number 8 while playing

¢ or 4 after selecting the folder.

file number 36

(Three times) (Twice)

File 36 \ 30 \ 20 \ 10 \ 9 \ 8

CONTINUED ON THE NEXT PAGE

27

EN25-28_KD-SC607[EE]f.p65 11/27/03, 12:19 PM27

To skip to the next or previous folder

Active

Mode

Plays at random

indicator

Press 5 (up) while playing a disc

to skip to the next folder.

FLDR RND RND and All files of the

Each time you press the button

indicators current folder, then

ENGLISH

consecutively, the next folder is

light up. files of the next

located (and the first file in the

folder and so on.

folder starts playing, if recorded).

DISC RND RND and All files on the disc.

indicators

light up.

Press ∞ (down) while playing a disc to skip back

to the previous folder.

Each time you press the button consecutively,

To play back files repeatedly

the previous folder is located (and the first file in

(Track Repeat/Folder Repeat Play)

the folder starts playing, if recorded).

You can play back the current file or all the files

in the current folder repeatedly.

Note:

If the folder does not contain any MP3/WMA files, it

1 Press M MODE to enter the

is skipped.

functions mode while playing a

disc.

Selecting playback modes

2 Press RPT (repeat), while

“MODE” is still flashing on the

display, so that “TRK RPT” or

To play back files at random

“FLDR RPT” appears on the

(Folder Random/Disc Random Play)

display.

You can play back all files of the current folder or

Each time you press the button,

all files on the disc at random.

the repeat play mode changes

1 Press M MODE to enter the

as follows:

functions mode while playing a

TRK RPT FLDR RPT

disc.

Canceled

2 Press RND (random), while

RPT indicator

“MODE” is still flashing on the

display, so that “FLDR RND” or

“DISC RND” appears on the

display.

Each time you press the button,

Ex.: When you select “TRK RPT”

the random play mode changes

while listening to an MP3 file

as follows:

DISC RNDFLDR RND

Active

Mode

Plays repeatedly

indicator

Canceled

TRK RPT RPT indicator The current (or

RND and (folder) indicators

lights up. specified) file.

FLDR RPT and RPT All files of the

indicators current (or

light up. specified) folder.

Ex.: When you select “FLDR RND”

while listening to an MP3 file

28

EN25-28_KD-SC607[EE]f.p65 11/27/03, 12:19 PM28

Оглавление

Топ 10 инструкций

Другие инструкции

JVC KD-S711R JVC KD-S711R JVC KD-S847 JVC KD-S847 JVC KD-SC800R JVC KD-SC800R JVC KD-SH707R JVC KD-SH707R Siemens WIQ1432EU Siemens WIQ1432EU LG F1058ND LG F1058ND