JVC KD-SC607: BASIC OPERATIONS

BASIC OPERATIONS

ENGLISH

1

3

2

Volume level appears.

Turning on the power

1

Turn on the power.

Volume level indicator

Note on One-Touch Operation:

4

Adjust the sound as you want. (See

When you select a source in step

2

below, the

pages 29 and 30.)

power automatically comes on. You do not have

to press this button to turn on the power.

To drop the volume in a moment

2

Select the source.

Press briefly while listening to any

source. “ATT” starts flashing on the display, and

the volume level will drop in a moment.

To resume the previous volume level, press the

button briefly again.

To operate the tuner (FM or AM),

• If you turn the control dial, you can also restore

see pages 10 – 19.

the sound.

To play a CD,

see pages 20 – 23.

To turn off the power

To play an MP3/WMA disc,

Press and hold for more than one

see pages 25 – 28.

second.

To operate the CD changer,

“SEE YOU” appears, then the unit turns off.

see pages 38 – 41.

• If you turn off the power while listening to a

To operate the external component

disc, disc play will start from where playback

(LINE IN), see page 42.

has been stopped previously, next time you

turn on the power.

3

Adjust the volume.

To increase the volume

CAUTION on Volume Setting:

Discs produce very little noise compared with

To decrease the volume

other sources. If the volume level is adjusted for

the tuner, for example, the speakers may be

damaged by the sudden increase in the output

level. Therefore, lower the volume before playing a

disc and adjust it as required during playback.

7

EN07-09_KD-SC607[EE]f.p65 11/27/03, 12:17 PM7

ENGLISH

Canceling the display

3

Select “DEMO OFF.”

demonstration

When shipped from the factory, display

DEMO OFF

DEMO ON

demonstration has been activated, and starts

automatically when no operations are done for

about 20 seconds.

• It is recommended to cancel the display

demonstration before you use the unit for the

first time.

To cancel the display demonstration, follow

4

Finish the setting.

the procedure below:

1

Press and hold SEL (select) for more

than 2 seconds so that one of the

PSM items appears on the display.

(PSM: see pages 31 and 32.)

To activate the display demonstration, repeat

the same procedure and select “DEMO ON” in

step

3

.

2

Select “DEMO” if not shown on the

display.

8

EN07-09_KD-SC607[EE]f.p65 11/27/03, 12:17 PM8

ENGLISH

Setting the clock

5

Finish the setting.

You can also set the clock system to either

24 hours or 12 hours.

1

Press and hold SEL (select) for more

than 2 seconds so that one of the

To check the current clock time or change the

PSM items appears on the display.

display mode

(PSM: see pages 31 and 32.)

Press DISP (display) repeatedly.

Each time you press the button,

the display changes as follows:

• During AM and FM non-RDS station

operation:

2

Set the hour.

1 Select “CLOCK H” (hour) if not shown on

the display.

• During FM RDS Station operation:

2 Adjust the hour.

12

• During disc operation:

3

Set the minute.

1 Select “CLOCK M” (minute).

2 Adjust the minute.

12

Notes:

• While playing a conventional CD, “NO NAME”

appears for the disc title/performer and the track

title.

• For indication change while playing a CD Text or

4

Set the clock system.

an MP3/WMA disc, see also pages 23 and 26.

1 Select “24H/12H.”

• During external component operation:

2 Select “24H” or “12H.”

12

• During power off:

The power turns on and the clock time is

shown for 5 seconds, then the power turns off.

9

Station name

Station frequency

Programme typeClock

Elapsed

Clock

playing time

Disc title /

Track title

performer

LINE IN

Clock

EN07-09_KD-SC607[EE]f.p65 11/27/03, 12:17 PM9