JVC KD-G807: SOUND ADJUSTMENTS

To cancel the preset sound mode, select

Selecting preset sound modes

“FLAT” in step

3

.

(iEQ: intelligent equalizer)

Notes:

You can select a preset sound mode (iEQ:

• You can adjust the preset sound modes temporarily.

ENGLISH

intelligent equalizer) suitable to the music genre.

However, your temporary adjustments will be reset

when you select another sound mode.

• There is a time limit in doing the following

• For details about the preset settings of each sound

procedure. If the setting is canceled before you

mode, see table on page 52.

finish, start from step

1

again.

• For showing the iEQ pattern on the display during

play, select “EQ & LEVEL” or “SILENT” for the

level meter. See also page 36.

1

Press MODE to enter the functions

mode.

When using the remote controller:

ATT

SOUND

Press SOUND repeatedly.

Each time you press the

2

Press EQ (equalizer) while “MODE”

U

R

SOURCE

F

button, the sound modes

is still on the display.

D

change as follows:

The last selected sound mode

is called up.

3

Select the sound mode you want.

As you turn the control

dial, the sound modes

change as follows:

FLAT O HARD ROCK O R&B O

POP O JAZZ O DANCE MUSIC O

COUNTRY O REGGAE O CLASSIC O

USER 1 O USER 2 O USER 3 O

(back to the beginning)

Indication pattern changes

for each sound mode.

Ex.: When you select “HARD ROCK”

32

EN31-33_KD-G807[EE]f.p65 1/15/04, 2:10 PM32

LEVEL (LOW, MID, HI):

Storing your own sound

Adjust the enhancement level.

adjustments

* By pressing ¢ or 4 , you can

directly move as follows:

You can adjust the sound modes to your

LOW LEVEL MID LEVEL

ENGLISH

preference and store your own adjustments in

memory (USER 1, USER 2 and USER 3).

HI LEVEL

FREQ (LOW, HI):

• There is a time limit in doing the following

Select the center frequency to adjust.

procedure. If the setting is canceled before you

WIDTH (LOW, MID):

finish, start from step

1

again.

Select the band width level.

1

Press MODE to enter the functions

5

Adjust the selected sound element.

mode.

2

Press EQ (equalizer) while “MODE”

is still on the display.

Preset values

Indication

The last selected sound mode

LOW MID HI

is called up.

LEVEL –06 (min.) –06 (min.) –06 (min.)

|||

+06 (max.) +06 (max.) +06 (max.)

3

Select the sound mode you want to

adjust.

FREQ. 60Hz 8kHz

80Hz 10kHz

100Hz 12kHz

120Hz 15kHz

WIDTH 1 (min.) 1 (min.)

||

4 (max.) 2 (max.)

6

Repeat steps

4

and

5

to adjust the

other sound elements.

7

Select one of the user sound modes

Ex.: When you select “JAZZ”

(USER 1, USER 2, USER 3).

4

Select sound elements to adjust.

Each time you press the

button, the sound elements

change as follows:

LOW LEVEL* = LOW FREQ = LOW WIDTH

8

Press EQ to store the adjustments.

= MID LEVEL* = MID WIDTH

“MEMORY” appears for a

= HI (high) LEVEL* = HI (high) FREQ

while.

= (back to the beginning)

33

EN31-33_KD-G807[EE]f.p65 1/15/04, 2:10 PM33