Главная > Инструкция к Автомагнитоле JVC KD-G807 > RADIO OPERATIONS

JVC KD-G807: RADIO OPERATIONS

RADIO OPERATIONS: JVC KD-G807

RADIO OPERATIONS

ENGLISH

Listening to the radio

2

Start searching for a station.

To search for stations of

You can use either automatic searching or manual

higher frequencies

searching to tune in to a particular station.

Searching for a station automatically:

To search for stations of lower frequencies

Auto search

When a station is received, searching stops.

1

Select the band (FM1 – 3, AM).

Each time you press the

To stop searching before a station is

button, the band changes as

received, press the same button you have

follows:

pressed for searching.

Note:

FM 1

FM 2

FM 3

A M

FM1 and FM2: 87.5 MHz – 108.0 MHz

(F1)

(F2)

(F3)

(A1)

FM3: 65.00 MHz – 74.00 MHz

Selected band appears*.

Searching for a station manually:

Manual search

1

Select the band (FM1 – 3, AM).

Lights up when receiving an FM stereo

Each time you press the

broadcast with sufficient signal strength.

button, the band changes as

follows:

* When “CLOCK DISP” is set to “CLK DISP

ON” (see page 36), the current indication will

FM 1

FM 2

FM 3

A M

soon change to the clock time.

(F1)

(F2)

(F3)

(A1)

Note:

This receiver has three FM bands (FM1, FM2,

Note:

FM3). You can use any one of them to listen to

This receiver has three FM bands (FM1, FM2,

an FM broadcast.

FM3). You can use any one of them to listen to

an FM broadcast.

10

EN10-13_KD-G807[EE]f.p65 1/15/04, 2:08 PM10

When an FM stereo broadcast is hard to

2

Press and hold ¢ or 4

until “M” (manual) starts flashing on

receive:

the display.

1 Press MODE to enter the

functions mode while listening

ENGLISH

to an FM stereo broadcast.

2 Press MO (monaural), while

“MODE” is still on the display, so

that “MONO” appears on the

display.

Each time you press the button,

the monaural mode turns on

3

Tune in to a station you want while

and off alternately.

“M” (manual) is still flashing.

To tune in to stations of

higher frequencies

MO (monaural) indicator

To tune in to stations of lower frequencies

When the MO indicator is lit on the display, the

sound you hear becomes monaural but the

• If you release your finger from the button,

reception will be improved.

the manual mode will automatically turns

off after 5 seconds.

• If you hold down the button, the frequency

Storing stations in memory

keeps changing—in 50 kHz intervals

(87.5 MHz – 108.0 MHz for FM 1 and

FM 2), in 30 kHz intervals (65.00 MHz –

You can use one of the following two methods to

74.00 MHz for FM 3) and 9 kHz for AM

store broadcasting stations in memory.

—MW/LW until you release the button.

• Automatic preset of FM stations: SSM (Strong-

station Sequential Memory)

• Manual preset of both FM and AM stations

FM station automatic preset: SSM

You can preset 6 local FM stations in each FM

band (FM1, FM2, and FM3).

1

Select the FM band (FM1 – 3) you

want to store FM stations into.

Each time you press the

button, the band changes as

follows:

FM 1

FM 2

FM 3

A M

(F1)

(F2)

(F3)

(A1)

CONTINUED ON THE NEXT PAGE

11

EN10-13_KD-G807[EE]f.p65 1/15/04, 2:08 PM11

Manual preset

2

Press MODE to enter the functions

mode.

You can preset up to 6 stations in each band

(FM1, FM2, FM3, and AM) manually.

ENGLISH

Ex.: Storing FM station of 92.5 MHz into the

preset number 1 of the FM1 band.

3

Press and hold SSM for about

1

Select the band (FM1 – 3, AM) you

2 seconds.

want to store stations into (in this

example, FM1).

Each time you press the

button, the band changes as

follows:

FM 1

FM 2

FM 3

A M

(F1)

(F2)

(F3)

(A1)

“SSM” appears, then disappears when

automatic preset is over.

2

Tune in to a station (in this example,

of 92.5 MHz).

Local FM stations with the strongest signals are

searched and stored automatically in the band

To tune in to stations of

number you have selected (FM1, FM2, or FM3).

higher frequencies

These stations are preset in the number buttons

—No.1 (lowest frequency) to No.6 (highest

frequency).

When automatic preset is over, the station stored

To tune in to stations of lower frequencies

in number button 1 will be automatically tuned in.

12

EN10-13_KD-G807[EE]f.p65 1/15/04, 2:08 PM12

3

Press and hold the number button

Tuning in to a preset station

(in this example, 1) for more than

2 seconds.

You can easily tune in to a preset station.

Remember that you must store stations first. If

you have not stored them yet, see “Storing

ENGLISH

stations in memory” on pages 11 – 13.

Preset number flashes for a while.

1

Select the band (FM1 – 3, AM).

Each time you press the

button, the band changes as

follows:

FM 1

FM 2

FM 3

A M

(F1)

(F2)

(F3)

(A1)

4

Repeat the above procedure to store

other stations into other preset

numbers.

2

Select the number (1 – 6) for the

preset station you want.

Notes:

• A previously preset station is erased when a new

station is stored in the same preset number.

• Preset stations are erased when the power supply to

the memory circuit is interrupted (for example,

during battery replacement). If this occurs, preset

the stations again.

13

EN10-13_KD-G807[EE]f.p65 1/15/04, 2:08 PM13

Оглавление

Топ 10 инструкций

Другие инструкции

JVC KD-G731 JVC KD-G731 JVC KD-G737 JVC KD-G737 JVC KD-G827 JVC KD-G827 JVC KD-LH1000R JVC KD-LH1000R Electrolux EWH 50 Royal Silver H Electrolux EWH 50 Royal Silver H Bosch HGG345250R Bosch HGG345250R