JVC KD-G807: CD OPERATIONS

CD OPERATIONS

ENGLISH

Refer to “MP3/WMA OPERATIONS” on pages 26

The display changes to show the following:

to 30 for operating MP3/WMA discs.

Playing a CD

CD indicator

Current source

1

Open the control panel.

indication*

Total playing time

Total track number

of the inserted disc

of the inserted disc

Note on One-Touch Operation:

When a CD is already in the loading slot,

Current track

pressing CD/CD-CH turns on the unit and starts

Elapsed playing time

number

playback automatically.

2

Insert a CD into the loading slot.

The unit draws the

CD, the control panel

goes back to the

previous position

* When “CLOCK DISP” is set to “CLK DISP ON”

(see page 40), and

(see page 36), the current indication will soon

playback starts

change to the clock time.

automatically.

Notes:

All tracks will be played repeatedly until you

• When a CD is inserted upside down, the control

stop playback.

panel moves down, the CD automatically ejects

from the loading slot. The source changes to the

previously selected source.

• If there is no CD in the loading slot, you cannot

select CD as the source.

• If the current disc is a CD Text, disc title/performer

and then track title will automatically appear.

21

EN21-24_KD-G807[EE]f.p65 1/15/04, 2:09 PM21

To stop play and eject the CD

To go to the next or previous tracks

Press 0.

Press ¢ briefly, while

CD play stops and the control panel moves

playing a CD, to go ahead to the

down. The CD automatically ejects from the

beginning of the next track.

Each time you press the

ENGLISH

loading slot.

• If you change the source or turn the power off,

button consecutively, the

CD play also stops (without ejecting the CD).

beginning of the next tracks is

Next time you select “CD” as the source, CD

located and played back.

play starts from where playback has been

stopped previously.

Press 4 briefly, while playing a CD, to go

back to the beginning of the current track.

To return the control panel to its previous

Each time you press the button consecutively,

position, press 0 again.

the beginning of the previous tracks is located

• If you keep the loading slot fully open for

and played back.

1 minute, (beeps sound when the “BEEP

SWITCH” is set to “BEEP ON”—see page 37)

To go to a particular track directly

the control panel automatically returns to its

previous position.

Press the number button corresponding to the

Be careful not to get the disc or your finger

track number to start its playback.

caught in between the control panel and the

unit.

Notes:

• If the ejected disc is not removed for about

• To select a track number from 1 – 6:

15 seconds, the disc is automatically inserted again

Press 1 (7) – 6 (12) briefly.

into the loading slot to protect it from dust.

• To select a track number from 7 – 12:

(Disc play will not start this time.)

Press and hold 1 (7) – 6 (12) for more than

• You can eject the disc even when the unit is turned

one second.

off.

To go to a track quickly (+10 and –10 buttons)

1 Press MODE to enter the functions mode

Locating a track or a

while playing a CD.

particular portion on a CD

To fast-forward or reverse the track

Press and hold ¢,

2 Press +10 or –10.

while playing a CD, to fast-

forward the track.

To skip 10 tracks* forwards to

the last track

Press and hold 4 , while playing a CD, to

To skip 10 tracks* backwards

reverse the track.

to the first track

* First time you press +10 or –10 button, the

track skips to the nearest higher or lower

track with a track number of multiple ten (ex.

10th, 20th, 30th).

Then each time you press the button, you can

skip 10 tracks (see “How to use the +10 and

–10 buttons” on page 23).

• After the last track, the first track will be

selected, and vice versa.

22

EN21-24_KD-G807[EE]f.p65 1/15/04, 2:09 PM22

To play back tracks repeatedly

How to use the +10 and –10 buttons

(Track Repeat Play)

• Ex. 1: To select track number 32 while

You can play back the current track repeatedly.

playing track number 6

1 Press MODE to enter the

ENGLISH

functions mode while playing a

CD.

(Three times)

(Twice)

2 Press RPT (repeat), while

Track 6 \ 10 \ 20 \ 30 \ 31 \ 32

“MODE” is still on the display, so

• Ex. 2: To select track number 8 while playing

that “TRK RPT” appears on the

track number 36

display.

Each time you press the button,

track repeat play mode turns on

and off alternately.

(Three times) (Twice)

Track 36 \ 30 \ 20 \ 10 \ 9 \ 8

RPT indicator

When track repeat play is turned on, the RPT

Selecting CD playback modes

indicator lights up on the display. The current

track starts playing repeatedly.

To play back tracks at random

(Disc Random Play)

To play back only intros (Track Intro Scan)

You can play back all tracks on the CD at random.

You can play back the first 15 seconds of each

1 Press MODE to enter the

track sequentially.

functions mode while playing a

1 Press MODE to enter the

CD.

functions mode while playing a

CD.

2 Press RND (random), while

“MODE” is still on the display, so

2 Press INT (intro), while “MODE”

that “DISC RND” appears on the

is still on the display, so that

display.

“TRK INT” appears on the

Each time you press the button,

display.

disc random play mode turns on

Each time you press the button,

and off alternately.

track intro scan mode turns on

and off alternately.

(disc) and RND indicators

INT indicator

When disc random play is turned on, the and

RND indicators light up on the display. A track

When track intro scan is turned on, the INT

randomly selected starts playing.

indicator lights up on the display. The first 15

seconds of each track is played sequentially.

23

EN21-24_KD-G807[EE]f.p65 1/15/04, 2:09 PM23

Playing a CD Text

Prohibiting disc ejection

In a CD Text, some information about the disc (its

You can prohibit disc ejection and can lock a disc

disc title, performer, and track title) is recorded.

in the loading slot.

ENGLISH

This CD Text information will be shown

automatically when you play a CD Text.

While pressing CD/CD-CH, press and

hold for more than 2 seconds.

To change the CD Text information

manually, select text display mode while

playing a CD Text.

Press DISP (display) repeatedly.

Each time you press the button,

“NO EJECT” flashes on the display for about

the display changes as follows:

5 seconds, and the disc is locked and cannot be

ejected.

Disc title / performer

Track title

( lights up on the display)

To cancel the prohibition and unlock the

Elapsed playing time and

disc

Current track number

While pressing CD/CD-CH, press and hold

again for more than 2 seconds.

“EJECT OK” flashes on the display for about

Notes:

5 seconds, and the disc is unlocked.

• The display shows up to 12 characters at one time

and scrolls if there are more than 12 characters.

See also “To select the scroll mode—SCROLL

MODE” on page 37.

Some characters or symbols will not be shown (will

be blanked or substituted) on the display.

• If no name is assigned to the CD, “NO NAME” will

appear. To assign a name to an audio CD, see page

39.

• If no disc title/performer or no track title is

recorded for the CD Text, “NO NAME” will appear.

• When track title is shown, TRACK indicator and

current track number also appear on the lower part

of the display.

24

EN21-24_KD-G807[EE]f.p65 1/15/04, 2:09 PM24