Ariston Aqualtis AQ8F 29 U H: Care and maintenance

EN

10

Care and maintenance

Cutting off the water and electricity

To access the pre-chamber:

supplies

1. Remove the kick strip

 Turn off the water tap after every wash cycle. This will

on the front of the machine

limit wear on the hydraulic system in the machine and

using a screwdriver (see

help to prevent leaks.

figure);

 Unplug the appliance when cleaning it and during all

maintenance work.

Cleaning the machine

The outer parts and rubber components of the appliance

can be cleaned using a soft cloth soaked in lukewarm

2. position a container so

soapy water. Do not use solvents or abrasives.

that it will collect the water

which flows out

(approximately 1.5 l) (see

Cleaning the detergent dispenser

figure);

drawer

3. unscrew the lid by

rotating it in an anti-

To remove the drawer, press

clockwise direction (see

lever (1) and pull the drawer

figure);

outwards (2) (see figure).

Wash it under running

water; this procedure should

4. clean the inside thoroughly;

be repeated frequently.

5. screw the lid back on;

6. reposition the panel, making sure the hooks are

securely in place before you push it onto the appliance.

Checking the water inlet hose

Caring for your appliance drum

Check the inlet hose at least once a year. If there are

any cracks, it should be replaced immediately: during

 Always leave the door ajar to prevent unpleasant

the wash cycles, water pressure is very strong and a

odours from forming.

cracked hose could easily split open.

Cleaning the pump

The washing machine is fitted with a self-cleaning pump

which does not require any maintenance. Sometimes,

small items (such as coins or buttons) may fall into the

protective pre-chamber at the base of the pump.

 Make sure the wash cycle has finished and unplug the

appliance.