Sony CPD-G400P: Resetting the adjustments

THIN HORIZONTAL LINE

Resetting the adjustments

The lines that appear on your screen are damper wires. See

page 16 for more information about the damper wires.

This monitor has the following three reset methods. Use the

RESET button to reset the adjustments.

DISTORTED SHAPE

If the shape of the picture on the screen seems distorted, try

adjusting the picture’s geometry. Move the control button , to

jump directly to the GEOMETRY menu.

OUT OF FOCUS

The picture may seem to be out of focus when the red and blue

color signals are not aligned properly, causing red or blue

Resetting a single adjustment item

shadows to appear around letters and lines. Try adjusting the

Use the control button to select the adjustment item you want to

picture’s convergence to make the shadows disappear. Move the

reset, and press the RESET button.

control button , to jump directly to the CONVERGENCE

menu. When the CONVERGNECE menu is displayed, the

contrast, brightness and moire adjustment settings are

Resetting all of the adjustment data for the

automatically reset for all input signals.

current input signal

DISCOLORATION

Press the RESET button when no menu is displayed on the screen.

Note that the following items are not reset by this method:

If the picture’s color appears abnormal in certain areas of the

• on-screen menu language (page 8)

screen, first check for any loose signal cables. After you have

• on-screen menu position (page 13)

checked the cables, try degaussing (demagnetizing) the screen

• control lock (page 14)

manually. Move the control button , to jump directly to the

OPTION menu, then select (DEGAUSS).

Resetting all of the adjustment data for all input

signals

GB

Press and hold the RESET button for more than two seconds.

Note

The RESET button does not function when (CONTROL LOCK) is

set to ON.

15