Sony CPD-120AS: Using Your Display Preset and user modes

Using Your Display

Preset and user modes

The Multiscan CPD-120AS/220AS display has factory preset modes for

the 10 most popular industry standards for true “plug and play”

capability.

For less common modes, its Digital Multiscan Technology will perform

all of the complex adjustments necessary to ensure a high quality picture

for any timing between 30 and 70 kHz.

NO.

Resolution

Horizontal

Vertical

(dots × lines)

Frequency

Frequency

1

640 × 400

31.5 kHz

70 Hz

2

640 × 480

31.5 kHz

60 Hz

3

640 × 480

43.3 kHz

85 Hz

4

800 × 600

37.9 kHz

60 Hz

5

800 × 600

46.9 kHz

75 Hz

6

1024 × 768

60.0 kHz

75 Hz

7

1024 × 768

68.7 kHz

85 Hz

8

1152 × 864

44.8 kHz

47 Hz (95 Hz interlace)

9

1152 × 864

54.8 kHz

60 Hz

10

1280 × 1024

64.0 kHz

60 Hz

®

✔Note for Windows

95 users

Install the new model information of the Sony computer display from “Windows 95 Monitor

Information disk” into your PC. (To install the file, refer to the attached “About the Windows

95 Monitor Infomration Disk”.)

This display complies with “VESA DDC,” the standards of Plug & Play. If your PC/graphic board

complies with DDC, select “Plug & Play Display (VESA DDC)” or this display’s model name

(CPD-120AS/220AS) as “Display type” from “Control Panel” on Windows 95. Some PC/

graphic boards do not comply with DDC. Even if they comply with DDC, that may have some

problems on connecting this display. In this case, select this display’s model name (CPD-

120AS/220AS) as “Display type” on Windows 95.

®

Windows

is a registered trademark of Microsoft Corporation in the United States and other

countries.

✔Note on recommended horizontal timing conditions

Horizontal sync width should be more than 1.0 µsec.

Horizontal blanking width should be more than 3.6 µsec.

Continued to the next page ➔

Using Your Display

GB

13