Yamaha DVD-S663 Black: Setup Menu

Setup Menu

Notes

General setup menu

• MP3 files created by this unit are restricted to

your private enjoyment only. Unauthorized use of

copyrighted recordings can be copyright

infringement.

GENERAL SETUP PAGE

• Yamaha and suppliers accepts no liability for the

DISC LOCK

loss of data saved on the USB devices connected

MP3 RECORD

PROGRAM

to this unit. As a precaution, it is recommended

DISPLAY DIM

that the files are made backup copies.

OSD LANGUAGE

• Discs incompatible with CDDA standard are not

SCREEN SAVER

guaranteed to function.

SLEEP

DIVX(R) VOD CODE

• Copy protected music discs incompatible with

CDDA standard are not recordable.

• Tracks protected by SCMS (Serial Copy

Locking/Unlocking the disc for

Management System) are not recordable.

viewing

• If “USB current protection active. Device not

supported” appears on the TV screen, the device

Not all discs are rated or coded by the

is not usable with this unit because the power

manufacturer of the disc. You can prevent

consumption of the device is too high.

playback of a specific disc by locking the disc.

• “Device not supported” or “USB current

You can lock up to 40 discs on this unit.

protection active. Device not supported” appears

• Select [DISC LOCK] in “GENERAL

on the TV screen when you connect the USB

SETUP PAGE”.

device, this unit does not support the USB device.

In this case, use a different USB device.

LOCK

• During recording, do not disconnect your USB

Select this to lock playback of the current disc.

device or set this unit to the standby mode.

Subsequent access to a locked disc requires a

y

six-digit password.

About the USB devices supported by this unit, refer

The default password is “000 000” (see

to “Supported USB devices” on page 23.

“Changing the password” on page 40).

1 Connect your USB device to the USB port

UNLOCK

of this unit (see “USB port” on page 12).

Select this to unlock the disc and allow future

playback.

2 Load a music CD (see “Basic operation”

on page 17).

Recording CD tracks onto your

3 In “GENERAL SETUP PAGE”, press

USB device

5/a to highlight [MP3 RECORD], and

You can record CD tracks onto your USB

then press 3 to select [SETUP].

device connected to this unit.

4 Press ENTER.

The tracks are recorded in MP3 format.

28 En

Setup Menu

English

5 In “MP3 RECORD”, press 5/a to

• The tracks may be displayed on more

highlight [SPEED], and then press ENTER

than one page in “TRACK”. In this

repeatedly to select the desired setting.

case, press 5/a to select or ,

and then press ENTER to scroll

MP3 RECORD

OPTION

TRACK

through pages.

SPEED Normal

Track 01 03:34

• You can also select or deselect all the

Track 02 06:42

Bitrate 128 kbps

tracks by selecting [Select All] or

Track 03 03:42

Track 04 03:09

[Deselect All].

Track 05 02:50

SUMMARY

Track 06 00:34

9 Press 2 to return to [SPEED].

Selected 0

Track 07 05:15

10 Press 5/a to highlight [Start], and then

Total Time 00:00

press ENTER.

Start Exit

Select All

Deselect All

• To cancel the recording, highlight

Normal

[CANCEL], and then press ENTER.

Select this to record at normal speed.

Fast

Notes

Select this to record at about 2x speed.

• Recording cannot be started in the following

conditions:

y

– the connected USB device is not supported

When you select [Normal], you can enjoy playback

– no USB device is connected

while the recording.

– when “USB current protection active. Device

6 Press 5/a to highlight [Bitrate], and then

not supported” is shown on the TV screen

press ENTER repeatedly to select the

• During recording, do not press any keys other

desired bit rate.

than ENTER.

96 kbps, 128 kbps, 192 kbps, 256 kbps,

11 When the recording is completed, press

320 kbps

2 / 3/5/a to highlight [Exit] and then

Select a bit rate for the music data.

press ENTER to exit from “MP3

RECORD” menu.

y

Generally, the higher the bit rate, the better the

y

sound quality. However, higher bit rates use more

The created file is named as “TRACKxxx”. In

space on a device.

“xxx”, numbers from 001 to 999 are inserted in

7 Press 3.

order.

8 Press 5/a to highlight the desired track in

“TRACK”, and then press ENTER. Repeat

this step as necessary to select the other

tracks.

➜ The number of selected tracks and total

time are shown in “SUMMARY”.

29 En

Setup Menu

5 Repeat steps 3-4 to input another track/

Note

chapter number.

You cannot edit the files on your USB device

■ To remove a track

connected to this unit by using this unit (for

example, deleting or renaming the files).

6 Use 2 / 3/5/a to select the track you

want to remove.

Programming disc tracks

7 Press ENTER to remove this track from

(except MP3/WMA/WMV/JPEG/

the program menu.

®

DivX

)

■ To start program playback

You can play back the contents of a disc in the

8 Use 2 / 3/5/a to highlight [START] on

desired order by programming the tracks to be

the program menu, and then press ENTER.

played. You can store up to 20 tracks per disc

with a maximum of ten discs.

➜ Playback starts for the selected tracks in

the programmed sequence.

1 In “GENERAL SETUP PAGE”, press

5/a to highlight [PROGRAM], and then

■ To exit from program playback

press 3 to select [INPUT MENU].

9 Use 2 / 3/5/a to highlight [EXIT] on

2 Press ENTER.

the program menu, and then press ENTER.

➜ The input menu appears on the TV

screen.

Dimming the front panel display

You can select different levels of brightness

PROGRAM: TRACK (01-17)

for the front panel display.

1 04

6 _ _

• Select [DISPLAY DIM] in

2 10

7 _ _

3 _ _

8 _ _

“GENERAL SETUP PAGE”.

4 _ _

9 _ _

5 _ _

10 _ _

100%

EXIT START NEXT

Select this for full brightness.

70%

■ To input your favorite tracks/

Select this for medium brightness.

chapters

40%

3 Use the numeric buttons (0-9) to enter a

Select this for dimming display.

valid track/chapter number.

4 Use 2 / 3/5/a to move the cursor to the

OSD language

next position.

This menu contains various options for the on-

• If the track/chapter number is more

screen display (OSD) language. For details,

than ten, press 33l to move to the next

see “Setting the OSD Language” on page 15.

page, and then proceed with

programming.

OR

•Use 2 / 3/5/a to highlight [NEXT]

on the program menu, and then press

ENTER.

30 En

Setup Menu

English

2 Press ENTER to exit.

Setting the screen saver

y

This function is used to turn on or off the

To purchase or rent the videos from DivX

®

VOD

screen saver.

service at https://vod.divx.com/, use the registration

• Select [SCREEN SAVER] in “GENERAL

code and download the video onto a CD-R for

SETUP PAGE”.

playback on this unit.

ON

Notes

Select this to turn off the TV screen when disc

playback is stopped or paused for more than

• All of the downloaded videos from DivX

®

VOD

15 minutes.

can only be played back on this unit.

•For DivX

®

, the time search feature is not

OFF

available.

Select this to disable the screen saver function.

Setting the sleep timer

Audio setup menu

This feature automatically sets this unit to the

standby mode after a certain elapsed period.

• Select [SLEEP] in “GENERAL SETUP

PAGE”.

AUDIO SETUP PAGE

ANALOG OUTPUT

30 MINS, 60 MINS, 90 MINS, 120 MINS,

DIGITAL AUDIO

150 MINS

HDMI AUDIO

Select one of them to set the sleep timer

NIGHT MODE

function.

OFF

Select this to cancel the sleep timer function.

y

Setting the analog output

The sleep timer setting can also be deactivated if this

unit is set to the standby mode.

Set the analog output to match the playback

capability of this unit.

®

Displaying the DivX

VOD

• Select [ANALOG OUTPUT] in

registration code

“AUDIO SETUP PAGE”.

®

Yamaha provides you with a DivX

VOD

STEREO

(Video On Demand) registration code that

Select this to change channel output to stereo,

allows you to rent and purchase videos using

which only delivers sound from the two front

®

the DivX

VOD service.

speakers.

For more information, visit

https://vod.divx.com/.

LT/RT

Select this if this unit is connected to a Dolby

1 In “GENERAL SETUP PAGE”, press

Pro Logic decoder.

5/a to highlight [DIVX(R) VOD CODE],

and then press 3.

➜ The registration code appears.

31 En

Setup Menu

96KHz

Setting the digital output

Select this to play back discs recorded at the

The [DIGITAL AUDIO] options are:

sampling rate of 96 kHz. If the 96 kHz disc is

[DIGITAL OUTPUT] and [LPCM OUTPUT].

copy protected, the digital output is

automatically converted to the sampling rate of

1 In “AUDIO SETUP PAGE”, press 5/a to

48 kHz. 48 kHz PCM data streams are output at

highlight [DIGITAL AUDIO], and then

48 kHz.

press 3.

4 Press 5/a to select a setting, and then

2 Press 5/a to highlight an option.

press ENTER.

3 Press 3.

DIGITAL OUTPUT

Turning the HDMI audio on/off

Set the digital output according to your

When you connect this unit to an HDMI

optional audio component connections.

compatible component via the HDMI jack,

OFF

select to turn on or off the HDMI audio output.

Select this to turn off the digital output.

• Select [HDMI AUDIO] in “AUDIO

ALL

SETUP PAGE”.

Select this if you have connected the digital

audio output jack to a multi-channel decoder/

ON

receiver.

Select this to turn on the HDMI audio output.

PCM ONLY

OFF

Select this only if your receiver is not capable

Select this to turn off the HDMI audio output.

of decoding multi-channel audio signals.

Notes

y

• Even if “ALL” is selected, this unit converts

• If you are not using the HDMI audio output, set

MPEG audio into 2 channel PCM and then

this to [OFF].

outputs to the connected component.

• If the monitor/receiver connected to this unit

• When “PCM ONLY“ is selected, DTS digital

using HDMI does not support HDMI audio signal

signal is muted.

input, set this to [OFF].

• When audio signals are being output by HDMI-

LPCM OUTPUT

compatible components, digital signals output at

Select this if you have connected this unit to a

the coaxial jack of this unit are muted.

PCM-compatible receiver via a digital jack,

• When [DIGITAL OUTPUT] is set to [OFF] on

such as the coaxial jack. In this case, you may

this unit, HDMI audio signal is not output even if

need to adjust [LPCM OUTPUT].

[HDMI AUDIO] is set to [ON] and an HDMI

Discs are recorded at a certain sampling rate.

connection is established between the monitor

The higher the sampling rate, the better the

and receiver.

sound quality.

• When [DIGITAL OUTPUT] is set to [ALL] on

48KHz

this unit, PCM signals are still output if the

monitor and receiver only support the PCM

Select this to play back discs recorded at the

format. However, the HDMI audio signal is

sampling rate of 48 kHz. All 96 kHz PCM data

muted when audio format plays back the DTS

streams (if available) are converted to the

source.

sampling rate of 48 kHz.

32 En

Setup Menu

English

y

TV type

This unit can output the following audio signals

This menu contains the options for selecting

using HDMI: 32/44.1/48 kHz, 2ch linear PCM

signals and bitstream signals (Dolby Digital and

the color system that matches your TV. For

DTS).

details, see “Setting a color system for your

TV” on page 14.

Turning the night mode on/off

Setting the TV display

In the night mode, high volume output is

softened and low volume output is brought

Set the aspect ratio of this unit to match your

upward to an audible level. It is useful when

TV. The format you select must be available

you want to watch your favorite action movie

on the disc. Otherwise, the TV display setting

without disturbing others at night.

will not affect the picture during playback.

• Select [NIGHT MODE] in “AUDIO

• Select [TV DISPLAY] in “VIDEO

SETUP PAGE”.

SETUP PAGE”.

ON

4:3 PAN SCAN

Select this to level out the volume. This

Select this if the aspect ratio of your TV is 4:3

feature is only available for movies with the

and you want both sides of the picture to be

Dolby Digital mode.

trimmed or formatted to fit your TV screen.

When you select this setting, invalidate the

4:3 LETTER BOX

dynamic range compression (DRC) of the

Select this if the aspect ratio of your TV is 4:3.

connected component.

In this case, a wide picture with black bands

OFF

on the upper and lower portions of the TV

Select this when you want to enjoy the full

screen are displayed.

dynamic range of surround sound.

16:9

Select this if you have a widescreen TV.

■ The relationship between the setting

Video setup menu

of this unit and the TV display

When the aspect ratio of your TV is 4:3:

Playback

Setting

TV display

VIDEO SETUP PAGE

disc

TV TYPE

TV DISPLAY

16:9

1

*

PROGRESSIVE

4:3 PAN

PICTURE SETTING

SCAN

BLACK LEVEL

CLOSED CAPTION

4:3

.......

COMPONENT

*

HDMI SETUP

16:9

: [COMPONENT] is only for Europe and

*

Russia models.

4:3 LETTER

BOX

4:3

33 En

Setup Menu

When the aspect ratio of your TV is 16:9

Notes on activating progressive scan:

(widescreen):

• Ensure that your TV is equipped with

progressive scan.

Playback

Setting

TV display

disc

• Connect using a component video cable.

• When making HDMI connections, you

16:9

cannot select [PROGRESSIVE].

• (Europe and Russia models only) When

16:9

[COMPONENT] is set to [RGB] (see

4:3

2

page 36), you cannot select

*

[PROGRESSIVE].

• You can turn off the progressive scan

*1: If the disc is not assigned to playback in

without using the setup mode if no picture is

panscan, it is played in letterbox.

displayed. See “No picture is displayed

*2: The side of the picture may be stretched

when you do not use progressive scan

depending on the TV. In this case, check the

connections (using the component video

screen size and aspect ratio of your TV.

jacks)” in “Troubleshooting” on page 43.

Turning the progressive scan

Adjusting picture settings

function on/off

This unit comes with three predefined sets of

This feature is only available if you have

picture color settings and one personal setting

connected this unit to a progressive scan TV

that you can define yourself.

through the component video jacks (see

“Component video jacks <A>” on page 10).

1 In “VIDEO SETUP PAGE”, press 5/a to

•Select [PROGRESSIVE] in “VIDEO

highlight [PICTURE SETTING], and then

SETUP PAGE”.

press 3.

OFF

STANDARD

Select this to disable the progressive scan

Select this for the standard picture setting.

function.

BRIGHT

ON

Select this to make the TV picture brighter.

Select this to enable the progressive scan

SOFT

function.

Select this to make the TV picture softer.

PERSONAL

Select this to personalize your picture color by

adjusting the brightness, contrast, tint and

color (saturation).

2 Press 5/a to select a setting, and then

press ENTER.

3 If you select [PERSONAL] in step 1,

proceed to steps 4-7.

34 En

Setup Menu

English

➜ The “PERSONAL PICTURE SETUP”

Turning the black level on/off

menu appears.

When [TV TYPE] is set to [NTSC] (see

page 14), this menu is effective for improving

the visibility of the black color in the dark area

PERSONAL PICTURE SETUP

on the screen. The black level setting has no

effect if [TV TYPE] is set to [PAL].

BRIGHTNESS

0

CONTRAST

0

• Select [BLACK LEVEL] in “VIDEO

TINT

0

SETUP PAGE”.

COLOR

0

ON

Select this to improve the visibility of the

black color.

4 Press 5/a to select one of the following

OFF

options.

Select this for the standard black level setting.

BRIGHTNESS

Adjust the brightness of the picture. Zero (0) is

Note

the average brightness setting value.

This function is only available for composite video /

CONTRAST

S-video output.

Adjust the contrast of the picture. Zero (0) is

the average contrast setting value.

Turning the closed caption on/off

TINT

Closed captions are data hidden in the video

Adjust the balance of red and green of the

signals of specific discs and are invisible

picture. Zero (0) is the average tint setting

without the use of a special decoder. The

value.

difference between subtitles and captions is

COLOR

that subtitles are intended for hearing persons

Adjust the color level of the picture. Zero (0) is

and captions are for the hearing impaired.

the average color setting value.

Subtitles rarely show all of the audio. For

5 Press 2 / 3 to adjust the setting that best

example, captions show sound effects (e.g.,

suits your personal preference.

“phone ringing”, “footsteps”), while subtitles

6 Repeat steps 4-5 to adjust other color

do not.

features.

Before you select this function, ensure that the

disc contains closed caption information and

7 Press ENTER.

your TV also supports this function.

• Select [CLOSED CAPTION] in

“VIDEO SETUP PAGE”.

ON

Select this to enable the closed caption

function.

OFF

Select this to disable the closed caption

function.

35 En

Setup Menu

SUPERWIDE

Note

Select to display a 4:3 image on the 16:9 screen

This function is only available for NTSC video

with non-linear stretching (center position of

format and composite video / S-video output.

screen is stretched less than the sides).

4:3 PILLAR BOX

Switching YUV/RGB

Select to display a 4:3 image on the 16:9 screen

without stretching.

When playing a disc

(Europe and Russia models only)

recorded in the 16:9 image, the image is

This setting allows you to toggle the output of

displayed in its original aspect ratio (16:9)

the video signal between YUV (on VIDEO

without pillar boxes.

OUT - COMPONENT) and RGB (on

OFF

SCART).

No aspect ratio adjustment is made when this

• Select [COMPONENT] in “VIDEO

option is selected.

SETUP PAGE”.

Note

YUV

When the video signal is 480p or 576p, you cannot

Select this for the component video

select [WIDE SCREEN FORMAT], and no aspect

connection.

ratio adjustment is made even if [SUPERWIDE] or

RGB

[4:3 PILLAR BOX] is selected.

Select this for SCART connection.

HDMI VIDEO

Setting the HDMI video

Set the resolution depending on the monitor

you are using. This unit is compatible with the

When you connect this unit to an HDMI

following video formats:

compatible component via the HDMI jack,

480p/60Hz, 576p/50Hz, 720p/50Hz, 60Hz,

select the following video output settings

1080i/50Hz, 60Hz, and 1080p/50Hz, 60Hz

depending on the connected component.

480P

1 In “VIDEO SETUP PAGE”, press 5/a to

480 progressive-scan video

highlight [HDMI SETUP], and then press

576P

3.

576 progressive-scan video

2 Press 5/a to highlight an option.

720P

3 Press 3 to enter a submenu.

720 progressive-scan video

1080I

WIDE SCREEN FORMAT

1080 interlaced video

Set the aspect ratio of the projected images on

the screen. This feature is only available when

1080P

1080 progressive-scan video

making HDMI connections and [TV

DISPLAY] is set to [16:9] (see page 33) when

AUTO

playing back 4:3 image.

The resolution is automatically selected to

match the monitor you are using.

36 En

Setup Menu

English

Notes

Preference setup menu

• For the settings other than [AUTO], images may

Press

7

twice to stop playback (if necessary)

not be displayed properly if a resolution output

before pressing SET UP.

setting is not supported by the HDMI component

you are using. In that case, follow the steps below

to return to [AUTO].

1 Press OPEN/CLOSE ( ) on the front panel

PREFERENCE PAGE

to open the disc tray.

AUDIO

2 Press 2.

SUBTITLE

3 Press SUBTITLE.

DISC MENU

PARENTAL

• You cannot set [TV TYPE], [PROGRESSIVE],

VR LIST

and [COMPONENT] (Europe and Russia

DATA DISC NAV

models) when making HDMI connections.

.......

DIVX SUBTITLE

*

• When disconnecting the HDMI cable, the setting

PBC

of [TV TYPE] may be changed. If the component

video, S-video, or composite video signal is not

: [DIVX SUBTITLE] is available for the

*

models other than Korea model.

output correctly, see “Completely distorted

picture, black/white picture, or no picture” in

“Troubleshooting” on page 43 to set the correct

TV type again.

Audio, subtitle and disc menu

These menus contain various language options

HD JPEG

This unit can display High-Definition JPEG

for the audio, subtitles, and disc menus

images when connecting to an HDMI

recorded on the DVD-Video. For details, see

component using HDMI cable.

“Setting the audio, subtitle, and disc menu

languages (DVD-Video only)” on page 16.

ON

Displays JPEG pictures with high quality.

Restricting playback with parental

OFF

Displays JPEG pictures with standard quality.

control

Some DVDs may have a parental level

Notes

assigned to the complete disc or to certain

• You can select [HD JPEG] when the HDMI video

scenes on the disc. This feature lets you set a

signals with 720p, 1080i, and 1080p are output.

playback limitation level.

• You cannot select [HDMI SETUP] when JPEG

The rating levels are from 1 to 8 and are

(including HD JPEG) pictures are displayed.

country dependent. You can prohibit playback

of certain discs that are not suitable for your

children or play certain discs in alternative

scenes.

37 En