Yamaha DV-C6860: Disc Operations
Disc Operations: Yamaha DV-C6860
Disc Operations
IMPORTANT!
5 To stop playback, press 9
(STOP) on the
– If the inhibition icon ( or X)
front panel or STOP (9) on the remote
appears on the TV screen when a
control.
button is pressed, the function for
• To play back a specific disc directly,
that button is not available on the
press DISC SKIP repeatedly on the
current disc or at the current time.
remote control or press DISC (1, 2, 3,
– Depending on the DVD or VIDEO
4, 5) on the front panel.
CD disc, some operations may
• Press PLAYXCHANGE on the front
operate differently or be
panel to open the disc tray, and then
restricted.
reload or unload discs without
– Do not push on the disc tray or put
interrupting current disc playback.
any objects other than discs on the
• Playback stops after all discs have been
disc tray. Doing so may cause the
played.
disc player to malfunction.
• When the disc tray is open, press
B/;
(PLAY/PAUSE),
/ (OPEN/CLOSE),
Basic playback
PLAYXCHANGE or
DISC (1, 2, 3, 4, 5) to close the disc
1 Press STANDBY/ON on the front panel
tray automatically.
or on the remote control.
2 Press /
(OPEN/CLOSE) on the front
panel to open the disc tray.
General operation
3 Place discs in the disc tray with the printed
Unless stated otherwise, all operations
side up.
described here are carried out using the
supplied remote control.
Pausing playback
1 During playback, press PAUSE (;).
➜ Playback is paused and the sound is
muted.
2 Press PAUSE (;) again to select the next
4 Press B/; (PLAY/PAUSE) on the front
picture frame.
panel or PLAY (B) on the remote
3 To resume normal playback, press
control.
PLAY (B).
➜ The disc tray closes and playback starts
automatically for all of the loaded discs
in the tray in sequence.
TIPS: The operating features described here might not be possible for certain discs.
Always refer to the instructions supplied with the disc.
12 En
Disc Operations
English
Selecting a track/chapter
Selecting the various repeat/
• Press S / T or use the numeric
shuffle functions
buttons (0-9) to select a track/chapter
number.
Repeat
• During repeated playback of a track/
chapter, press S / T to replay the
Repeating chapter/title/disc (DVD)
same track/chapter.
Each time you press REPEAT, the display
changes as follows:
Searching backward/forward
CHAPTER TITLE
1 Press and hold S / T or press 1 / 2.
REPEAT OFF
ALL DISC DISC
2 While searching, press S / T or
1 / 2 repeatedly to select the desired
CHAPTER*: repeats the current
speed.
chapter
TITLE: repeats the current title
3 To resume normal playback, press
DISC*: repeats the entire disc
PLAY (B).
ALL DISC*: repeats all discs loaded
Notes:
in the tray
– 1 / 2 key may not be available with some
REPEAT OFF: exits from the repeat mode
discs.
* This feature may not be available with some
– For MP3 and WMA, the search function
discs.
allows you to search the track currently
Repeating track/disc (except DVD)
being played.
Each time you press REPEAT, the display
changes as follows;
Stopping playback
TRACK DISC
• Press STOP (9).
REPEAT OFF ALL DISC
TRACK: repeats the current track
DISC: repeats the entire disc
ALL DISC: repeats all discs loaded in
the tray
REPEAT OFF: exits from the repeat mode
Notes:
– When only one disc is available in the disc
tray, it is continuously played when
ALL DISC is selected.
– For VCD, repeat playback is not available
when the PBC mode is selected.
TIPS: The operating features described here might not be possible for certain discs.
Always refer to the instructions supplied with the disc.
13 En
Disc Operations
Repeating a section within a
Operations for video playback
chapter/track
(DVD/VCD/SVCD)
1 While playing a disc, press A-B at the
desired starting point.
Using the disc menu
2 Press A-B again at the desired end point.
Depending on the disc, a menu may appear
•A and B can only be set within the same
on the TV screen once you load the disc.
chapter/track.
➜ The selected section repeats
To select a playback feature or item
continuously.
• Use 1 / 2/3 / 4 or the numeric
buttons (0-9) on the remote control,
3 To exit from the sequence, press A-B.
and then press ENTER/OK to start
playback.
Shuffle (except DVD/VCD/SVCD)
To access or exit from the menu
With the shuffle function, you can play
tracks in a random order.
• Press MENU on the remote control.
1 During playback, press SHUFFLE
repeatedly to select between SHUFFLE
Slow motion
DISC, SHUFFLE ALL DISC, and SHUFFLE
You can play back in slow motion.
OFF.
1 Press 3 for reverse slow motion or 4 for
➜ The selected mode appears in the front
forward slow motion.
panel display for several seconds.
2 During slow motion, press 3 / 4
• In the SHUFFLE DISC mode, all tracks
repeatedly to select the desired speed.
on the disc currently playing are played
3 To resume normal playback, press
in a random order.
PLAY (B).
• In the SHUFFLE ALL DISC mode, tracks
from all discs are played in a random
Note:
order:
– Reverse slow motion is not available for
– If the disc currently playing is a CD, only
VCDs and SVCDs.
tracks from CDs will be played.
– If the disc currently playing is formatted
in MP3 or WMA, tracks on the disc
currently playing are played in a random
order. When all the tracks on that disc
have been played, shuffle playback
continues with the next disc.
TIPS: The operating features described here might not be possible for certain discs.
Always refer to the instructions supplied with the disc.
14 En
Disc Operations
English
Zooming in
On-screen display (OSD)
This function allows you to enlarge or
The OSD menu shows disc playback
lessen the picture on the TV screen and
information (e.g., the title or chapter
pan through the enlarged picture.
number, elapsed playing time or audio/
subtitle language). A number of operations
1 During playback, press ZOOM repeatedly
are possible without interrupting disc
to display the picture at different scales.
playback.
• Use
1 / 2/3 / 4 to pan through the
enlarged picture.
1 During playback, press ON SCREEN.
➜ Playback continues.
➜ A list of available disc information
appears on the TV screen.
2 Press ZOOM repeatedly to return to the
original size.
DVD
MENU
Resuming playback from the last
TITLE 02/14
stopped point
CHAPTER 02/14
AUDIO 5.1CH
You can resume playback of the last 10
SUBTITLE ENG
discs, even if the discs were ejected or the
BITRATE 16 TITLE ELAPSED 0:02:25
power of this unit was turned off.
1 Load one of the last 10 discs.
VCD/SVCD
➜ “LOADING #” (#: the disc tray number
(1-5)) appears on the TV screen.
MENU
TRACK 02/14
2 Press PLAY (B) while “LOADING #” is
DISC TIME 0:49:17
displayed on the TV screen.
TRACK TIME 0:03:43
➜ “RESUME PLAY” appears on the TV
REPEAT OFF
screen and the disc is played back from
BITRATE 16 TOTAL ELAPSED 0:02:25
the last point.
2 Press 3 / 4 to view the information, and
To cancel the resume mode
then press ENTER/OK to access the
• When playback is stopped, press
selected item.
STOP (9) again.
3 Use the numeric buttons (0-9) to input
the number/time or press 3
/ 4 to make a
selection, and then press ENTER/OK to
confirm the selection.
➜ Playback changes to the selected time
or to the selected title/chapter/track.
TIPS: The operating features described here might not be possible for certain discs.
Always refer to the instructions supplied with the disc.
15 En
Disc Operations
Title/Chapter/Track selection
Repeat/Time display (DVD/VCD)
(DVD/VCD)
1 Press 3
/ 4 to select [REPEAT] or [TIME
1 Press 3 / 4 to select [TITLE] or
DISP.].
[CHAPTER] (DVD) or [TRACK] (VCD).
2 Press ENTER/OK to confirm the
2 Press ENTER/OK to confirm the
selection.
selection.
3 Press 3
/ 4 to highlight your selection, and
3 Select a title, chapter or track number
then press ENTER/OK.
using the numeric buttons (0-9).
Time display (CD)
Time search (DVD/VCD)
Each time you press ON SCREEN, the
1 Press 3
/ 4 to select [TT TIME] or [CH
time display changes as follows:
TIME] (DVD) or [TRACK TIME] or [DISC
TOTAL ELAPSED TOTAL REMAIN
TIME] (VCD).
• [TT TIME] refers to the total time of the
SINGLE REMAIN SINGLE ELAPSED
current title, and [CH TIME] refers to
the total time of the current chapter.
2 Press ENTER/OK to confirm the
Special DVD features
selection.
3 Enter hours, minutes and seconds from left
to right using the numeric buttons (0-9)
Playing by title
(e.g. 0:34:27).
1 Press MENU.
➜ The disc title menu appears on the TV
Audio/Subtitle/Angle (DVD)
screen.
You can change [AUDIO], [SUBTITLE] or
[ANGLE] if these functions are available on
2 Use 1 / 2/3 / 4 or the numeric buttons
the disc you are playing.
(0-9) to select a playback option.
1 Press 3
/ 4 to select [AUDIO],
3 Press ENTER/OK to confirm your
[SUBTITLE] or [ANGLE].
selection.
2 Press ENTER/OK to confirm the
selection.
Camera angle
3 For Audio and Subtitle:
• Press ANGLE repeatedly to select the
Press 3
/ 4 to highlight your selection, and
desired angle.
then press ENTER/OK.
OR
For Angle:
Select an angle using the numeric
buttons (0-9).
TIPS: The operating features described here might not be possible for certain discs.
Always refer to the instructions supplied with the disc.
16 En
Disc Operations
English
Audio
Audio CDs
Changing the audio language and/or
format
Playing by discs
• Press AUDIO repeatedly to select an
1 Load a disc.
audio language.
➜ Playback starts automatically.
➜ The TV screen displays the current
Subtitles
playback status and the number of
• Press SUBTITLE repeatedly to select
tracks to select the desired track.
a subtitle language.
2 Playback stops at the end of the disc.
3 To stop playback, press STOP (9).
Special VCD & SVCD features
Playing MP3/JPEG/Kodak
Playback control (PBC)
picture CDs
For VCD with playback control
(PBC) feature (version 2.0 only)
General operation
1 Press MENU to toggle between “PBC
1 Load a disc.
ON” and “PBC OFF”.
• The disc reading time may exceed 30
➜ If you select “PBC ON”, the disc menu
seconds due to the complexity of the
(if available) appears on the TV.
directory/file configuration.
2 Use S / T or the numeric buttons
➜ The data disc menu appears on the TV
(0-9) to select a playback option.
screen.
3 During playback, press TOP MENU/
2 Playback starts automatically. If not, press
RETURN to return to the menu screen
PLAY (B).
(if PBC is selected).
00:00 00:00
If you want to skip the index menu
001/020
and play back a disc directly from the
Favorite
beginning,
• Press MENU on the remote control to
MP3
Piano
turn off PBC.
MP3
Cello
MP3
Jazz
MP3
Live
TIPS: The operating features described here might not be possible for certain discs.
Always refer to the instructions supplied with the disc.
17 En
Disc Operations
During playback, you can:
• Press S / T to select another
track/file in the current folder.
• Press PAUSE (;) to pause playback.
Note:
– It may not be possible to play certain MP3/
JPEG discs due to the configuration and
characteristics of the discs or the recording
conditions.
2 Press S / T to display the other
Selecting a folder and track/file
pictures on the previous/next page.
1 Press 3 / 4 to select a folder, and then
3 Use
1 / 2/3 / 4 to highlight one of the
press ENTER/OK to open the folder.
pictures, and then press ENTER/OK to
2 Press 3 / 4 to select a track/file.
start playback.
3 Press ENTER/OK to confirm your
OR
selection.
Move the cursor to highlight on the
➜ Playback starts from the selected track/
bottom of the page to start playback from
file, and continues to all the tracks/files
the first picture on the current page.
on all available folders.
4 Press MENU to return to the picture CD
menu.
Special picture disc features
Zooming pictures
1 Load a picture disc (Kodak Picture CD or
1 During playback, press ZOOM repeatedly
JPEG).
to display the picture at different scales.
➜ For Kodak discs, the slideshow begins.
➜ For JPEG discs, the picture menu
2 Use 1 / 2/3 / 4 to view the zoomed picture.
appears on the TV screen.
2 Press PLAY (B) to start the slideshow.
Playback with multi-angles
• During playback, press 1 / 2/3 / 4 to
rotate the picture on the TV screen.
Preview function (JPEG)
1:
rotates the picture counter-clockwise
This function displays the content of the
2: rotates the picture clockwise
current folder or the entire disc.
3: flips the picture vertically
1 Press STOP (9) during playback.
4: flips the picture horizontally
➜ 12 thumbnail pictures appear on the TV
screen.
TIPS: The operating features described here might not be possible for certain discs.
Always refer to the instructions supplied with the disc.
18 En
Disc Operations
English
Scan effect
• Press ANGLE repeatedly to choose a
scan effect.
➜ Various scan effects appear in the top
left corner of the TV screen.
Playing MP3 music and JPEG
pictures simultaneously
1 Load a disc that contains both music and
picture data.
➜ The disc menu appears on the TV
screen.
2 Select an MP3 track.
3 During MP3 music playback, select a
picture from the TV screen, and then press
PLAY (B).
➜ The picture files are played back one
after another, and playback continues to
all the files on all available folders.
4 To quit simultaneous playback, press
MENU, and then press STOP (9).
Note:
– Some files on Kodak or JPEG discs may be
distorted during playback due to the
configuration and characteristics of the
discs.
TIPS: The operating features described here might not be possible for certain discs.
Always refer to the instructions supplied with the disc.
19 En
Оглавление
- DVD CHANGER LECTEUR DE DVD CHANGEUR
- Contents
- Introduction
- Functional Overview
- Connections
- Getting Started
- Disc Operations
- Setup Menu
- Language Code
- Troubleshooting
- Glossary
- Specifications
- Table des matières
- Introduction
- Description des éléments
- Raccordements
- Pour commencer
- Fonctionnement du lecteur de disque
- Menu de réglage
- Codes de langue
- Guide de dépannage
- Glossaire
- Caractéristiques techniques
- Inhalt
- Einleitung
- Funktionsbeschreibung
- Anschlüsse
- Erste Schritte
- Disc-Betrieb
- Setup-Menü
- Sprachencodes
- Störungssuche
- Glossar
- Technische Daten