JVC KS-FX945R: RDS OPERATIONS
RDS OPERATIONS: JVC KS-FX945R
RDS OPERATIONS
To use Network-Tracking Reception
What you can do with RDS
You can select the different modes of network-
RDS (Radio Data System) allows FM stations to
tracking reception to continue listening to the
send an additional signal along with their regular
same programme in its finest reception.
programme signals. For example, the stations
When shipped from the factory, “AF” is selected.
ENGLISH
send their station names, as well as information
about what type of programme they broadcast,
• AF: Network-Tracking Reception is
such as sports or music, etc.
activated with Regionalization set to
Another advantage of RDS function is called
“off.”
“Enhanced Other Networks.” By using the
With this setting, the unit switches to
Enhanced Other Networks data sent from a
another station within the same
station, you can tune in to a different station of a
network when the receiving signals
different network broadcasting your favorite
from the current station become
programme or traffic announcement while
weak. (In this mode, the programme
listening to another programme or to another
may differ from the one currently
source such as tape.
received.)
The AF indicator lights up but the
By receiving the RDS data, this unit can do the
REG indicator does not.
following:
• Tracing the same programme automatically
• AF REG: Network-Tracking Reception is
(Network-Tracking Reception)
activated with Regionalization set to
• Standby Reception of TA (Traffic
“on.”
Announcement) or your favorite programme
With this setting, the unit switches to
• PTY (Programme Type) search
another station, within the same
• Programme search
network, broadcasting the same
• And some other functions
programme when the receiving
signals from the current station
Tracing the same programme
become weak.
Both the AF indicator and the REG
automatically (Network-Tracking
indicator light up.
Reception)
When driving in an area where FM reception is
• OFF: Network-Tracking Reception is
not good, the tuner built in this unit automatically
deactivated.
tunes in to another RDS station, broadcasting the
Neither the AF indicator nor the REG
same programme with stronger signals. So, you
indicator lights up.
can continue to listen to the same programme in
AF indicator REG indicator
its finest reception, no matter where you drive.
(See the illustration on page 18.)
Two types of the RDS data are used to make
Network-Tracking Reception work correctly
—PI (Programme Identification) and AF
(Alternative Frequency).
Without receiving these data correctly from the
Note:
RDS station you are listening to, Network-
If a DAB tuner is connected and Alternative Reception
Tracking Reception will not operate.
(for DAB services) is activated, Network-Tracking
Reception (“AF”) is also activated automatically. On
the other hand, Network-Tracking Reception cannot
be deactivated without deactivating Alternative
Reception. (See page 39.)
12
EN12-18KS-FX945R[EE]f.p65 3/10/03, 9:17 AM12
Using TA Standby Reception
1
Press and hold SEL (select) for more
than 2 seconds so that one of the
TA Standby Reception allows the unit to switch
PSM items appears on the display.
temporarily to Traffic Announcement (TA) from
(PSM: see page 26.)
the current source (another FM station, tape, or
other connected components).
ENGLISH
• TA Standby Reception will not work if you are
listening to an AM station.
2
Select “AF-REG” (alternative
Press TP PTY to activate TA Standby Reception.
frequency/regionalization reception)
if not shown on the display.
7 When the current source is FM, the TP
indicator either lights up or flashes.
• If the TP indicator lights up, TA Standby
Reception is activated.
If a station starts broadcasting a traffic
announcement, “TRAFFIC” appears on the
3
Select the desired mode—“AF,”
display, and this unit automatically tunes in to
“AF REG,” or “OFF.”
the station. The volume changes to the
preset TA volume level (see page 17) and the
traffic announcement can be heard.
• If the TP indicator flashes, TA Standby
Reception is not yet activated since the
station being received does not provide the
signals used for TA Standby Reception.
To activate TA Standby Reception, you need
4
Finish the setting.
to tune in to another station providing these
signals. Press ¢ or 4 to search
for such a station.
When a station providing these signals is
tuned in, the TP indicator stops flashing and
remains lit. Now TA Standby Reception is
activated.
7 When the current source is other than FM,
the TP indicator lights up.
If a station starts broadcasting a traffic
announcement, “TRAFFIC” appears on the
display, and this unit automatically changes the
source and tunes in to the station.
To deactivate the TA Standby Reception,
press TP PTY again. The TP indicator goes off.
13
EN12-18KS-FX945R[EE]f.p65 3/10/03, 9:17 AM13
Using PTY Standby Reception
4
Finish the setting.
PTY Standby Reception allows the unit to switch
temporarily to your favorite programme (PTY:
Programme Type) from the current source
ENGLISH
(another FM station, tape, or other connected
components).
• PTY Standby Reception will not work if you are
7 When the current source is FM, the PTY
listening to an AM station.
indicator either lights up or flashes.
• If the PTY indicator lights up, PTY Standby
You can select your favorite programme type for
Reception is activated.
PTY Standby Reception.
If a station starts broadcasting the selected
When shipped from the factory, PTY Standby
PTY programme, this unit automatically
Reception is turned off. (“OFF” is selected for
tunes in to the station.
PTY Standby Reception.)
• If the PTY indicator flashes, PTY Standby
Reception is not yet activated since the
1
Press and hold SEL (select) for more
station being received does not provide the
than 2 seconds so that one of the
signals used for PTY Standby Reception.
PSM items appears on the display.
To activate PTY Standby Reception, you
(PSM: see page 26.)
need to tune in to another station providing
these signals. Press ¢ or 4 to
search for such a station.
When a station providing these signals is
tuned in, the PTY indicator stops flashing
and remains lit. Now PTY Standby Reception
2
Select “PTY STBY” (standby) if not
is activated.
shown on the display.
7 When the current source is other than FM,
the PTY indicator lights up.
If a station starts broadcasting the selected
PTY programme, this unit automatically
changes the source and tunes in to the station.
To deactivate the PTY Standby Reception,
select “OFF” in step
3
on the left column. The
3
Select one of the twenty-nine PTY
PTY indicator goes off.
codes. (See page 18.)
Selected code name
appears on the display
and is stored into
memory.
14
EN12-18KS-FX945R[EE]f.p65 3/10/03, 9:17 AM14
Searching your favorite programme
2
Select one of the twenty-nine PTY
You can search any one of the PTY codes.
codes. (See page 18.)
In addition, you can store your 6 favorite
Selected code name
programme types in the number buttons.
appears on the display.
When shipped from the factory, the following
ENGLISH
6 programme types have been stored in the
number buttons (1 to 6).
To store your favorite programme types, see
below.
3
Press and hold the number button
To search your favorite programme type, see
for more than 2 seconds to store the
page 16.
PTY code selected into the preset
number you want.
1
2
3
POP M
ROCK M EASY M
45
6
CLASSICS
AFFAIRS
VARIED
Selected preset number and “MEMO”
To store your favorite programme types
(memory) appear alternately.
1
Press and hold TP PTY for more
4
Press and hold TP PTY for more
than 2 seconds while listening to an
than 2 seconds to exit from this
FM station.
mode.
The last selected PTY code appears.
15
EN12-18KS-FX945R[EE]f.p65 3/10/03, 9:17 AM15
To search your favorite programme type
• If there is a station broadcasting a programme
of the same PTY code as you selected, that
station is tuned in.
1
Press and hold TP PTY for more
• If there is no station broadcasting a
than 2 seconds while listening to an
programme of the same PTY code as you
ENGLISH
FM station.
selected, the station will not change.
Note:
In some areas, the PTY search will not work correctly.
Other convenient RDS
The last selected PTY code appears.
functions and adjustments
2
To select one of your favorite
programme type
Automatic selection of the station
when using the number buttons
Usually when you press the number button, the
preset station is tuned in.
However, when the preset station is an RDS
or
station, something different will happen. If the
To select any one of the twenty-nine
signals from that preset station are not sufficient
PTY codes
for good reception, this unit, using the AF data,
tunes in to another frequency broadcasting the
same programme as the original preset station is
broadcasting. (Programme search)
• The unit takes some time to tune in to another
station using programme search.
Preset number appears only if you select
To activate programme search, follow the
a PTY code using the number buttons.
procedure below.
• See also “Changing the general settings
(PSM)” on page 25.
1 Press and hold SEL (select) for more than
2 seconds so that one of the PSM items
Ex.: When “ROCK M” is selected
appears on the display.
2 Press ¢ or 4 to select
3
Press ¢ or 4 to start PTY
“P(Programme)-SEARCH.”
search for your favorite programme.
3 Turn the control dial clockwise to select “ON.”
Now programme search is activated.
4 Press SEL (select) to finish the setting.
To cancel programme search, repeat the same
procedure and select “OFF” in step 3 by turning
the control dial counterclockwise.
16
EN12-18KS-FX945R[EE]f.p65 3/10/03, 9:17 AM16
Changing the display mode while
Setting the TA volume level
listening to an FM station
You can preset the volume level for TA Standby
Reception. When a traffic programme is received,
You can change the initial indication on the
the volume level automatically changes to the
display to station name (PS NAME) or station
preset level.
frequency (FREQ) while listening to an FM RDS
ENGLISH
• See also “Changing the general settings
station.
(PSM)” on page 25.
• See also “Changing the general settings
(PSM)” on page 25.
1 Press and hold SEL (select) for more than
2 seconds so that one of the PSM items
1 Press and hold SEL (select) for more than
appears on the display.
2 seconds so that one of the PSM items
2 Press ¢ or 4 to select “TA VOL”
appears on the display.
(TA volume).
2 Press ¢ or 4 to select “TU DISP”
3 Turn the control dial to set to the desired
(tuner display).
volume.
3 Turn the control dial to set to the desired
You can set it from “VOL 00” to “VOL 50.”
indication (“PS NAME” or “FREQ”).
4 Press SEL (select) to finish the setting.
4 Press SEL (select) to finish the setting.
Note:
By pressing DISP (display), you can change the
Automatic clock adjustment
display while listening to an FM RDS station. Each
When shipped from the factory, the clock built in
time you press the button, the following information
this unit is set to be readjusted automatically
appears on the main display:
using the CT (Clock Time) data in the RDS
signal.
If you do not want to use automatic clock
Station name
adjustment, follow the procedure below.
(PS NAME)
• See also “Changing the general settings
(PSM)” on page 25.
Station frequency
1 Press and hold SEL (select) for more than
(FREQ)
2 seconds so that one of the PSM items
appears on the display.
Programme type
2 Press ¢ or 4 to select “AUTO
(PTY)
ADJ” (adjustment).
3 Turn the control dial counterclockwise to select
“OFF.”
• Then, the display goes back to the original
Now automatic clock adjustment is canceled.
indication in several seconds.
4 Press SEL (select) to finish the setting.
• For more details, see “To set the clock display
—CLOCK” on page 27.
To reactivate clock adjustment, repeat the
same procedure and select “ON” in step 3 by
turning the control dial clockwise.
Note:
You must stay tuned to the same station for more than
2 minutes after setting “AUTO ADJ” to “ON.”
Otherwise, the clock time will not be adjusted. (This is
because the unit takes up to 2 minutes to capture the
CT data in the RDS signal.)
17
EN12-18KS-FX945R[EE]f.p65 3/14/03, 9:29 AM17
PTY codes
NEWS: News
SOCIAL: Programmes on social
AFFAIRS: Topical programmes expanding
activities
on current news or affairs
RELIGION: Programmes dealing with any
ENGLISH
INFO: Programmes which impart
aspect of belief or faith, or the
advice on a wide variety of topics
nature of existence or ethics
SPORT: Sport events
PHONE IN: Programmes where people can
EDUCATE: Educational programmes
express their views either by
DRAMA: Radio plays
phone or in a public forum
CULTURE: Programmes on national or
TRAVEL: Programmes about travel
regional culture
destinations, package tours,
SCIENCE: Programmes on natural science
and travel ideas and
and technology
opportunities
VARIED: Other programmes like comedies
LEISURE: Programmes concerned with
or ceremonies
recreational activities such as
POP M: Pop music
gardening, cooking, fishing,
ROCK M: Rock music
etc.
EASY M: Easy-listening music
JAZZ: Jazz music
LIGHT M: Light music
COUNTRY: Country music
CLASSICS: Classical music
NATION M: Current popular music from
OTHER M: Other music
another nation or region, in that
WEATHER: Weather information
country’s language
FINANCE: Reports on commerce, trading,
OLDIES: Classic pop music
the Stock Market, etc.
FOLK M: Folk music
CHILDREN: Entertainment programmes for
DOCUMENT: Programmes dealing with
children
factual matters, presented in an
investigative style
The same programme can be received on different frequencies.
Programme 1
broadcasting on
Programme 1
frequency A
broadcasting on
frequency E
Programme 1
broadcasting on
frequency B
Programme 1
broadcasting on
frequency C
Programme 1
broadcasting on
frequency D
18
EN12-18KS-FX945R[EE]f.p65 3/10/03, 9:17 AM18
Оглавление
- CONTENTS
- LOCATION OF THE BUTTONS
- BASIC OPERATIONS
- RADIO OPERATIONS
- RDS OPERATIONS
- TAPE OPERATIONS
- SOUND ADJUSTMENTS
- OTHER MAIN FUNCTIONS
- CD CHANGER OPERATIONS
- EXTERNAL COMPONENT OPERATIONS
- DAB TUNER OPERATIONS
- TROUBLESHOOTING
- MAINTENANCE
- SPECIFICATIONS
- СОДЕРЖАНИЕ
- РАСПОЛОЖЕНИЕ КНОПОК
- ОСНОВНЫЕ ОПЕРАЦИИ
- ОПЕРАЦИИ С РАДИОПРИЕМНИКОМ
- ОПЕРАЦИИ С RDS
- ОПЕРАЦИИ С МАГНИТОФОНОМ
- НАСТРОЙКА ЗВУКА
- ДРУГИЕ ГЛАВНЫЕ ФУНКЦИИ
- ОПЕРАЦИИ С ВНЕШНИМ КОМПОНЕНТОМ
- ОПЕРАЦИИ С ТЮНЕРОМ DAB
- ВЫЯВЛЕНИЕ НЕИСПРАВНОСТЕЙ
- ТЕХНИЧЕСКОЕ ОБСЛУЖИВАНИЕ
- ТЕХНИЧЕСКИЕ ХАРАКТЕРИСТИКИ
- Please reset your unit