JVC KD-G531: Troubleshooting
Troubleshooting: JVC KD-G531
Ejecting a disc
iPod or D. player operations
• If the ejected disc is not removed within 15 seconds,
• When you turn on this unit, the iPod or D. player is
the disc is automatically inserted again into the
charged through this unit.
loading slot to protect it from dust. Playback starts
• While the iPod or D. player is connected, all
automatically.
operations from the iPod or D. player are disabled.
ENGLISH
• After ejecting a disc, “NO DISC” appears and you
Perform all operations from this unit.
cannot operate some of the buttons. Insert another
• The text information may not be displayed correctly.
disc or press SRC to select another playback source.
– Some characters such as accented letters cannot be
shown correctly on the display.
– Depends on the condition of communication
General settings—PSM
between the iPod or D. player and the unit.
• “AUTO” setting for “DIMMER” may not work correctly
• If the text information includes more than 8
on some vehicles, particularly on those having a
characters, it scrolls on the display. This unit can
control dial for dimming.
display up to 40 characters.
In this case, change “DIMMER” setting to any other
than “AUTO.”
Notice:
• If you change the “AMP GAIN” setting from “HIGH
When connecting an iPod or a D. player, some
PWR” to “LOW PWR” while the volume level is set
operations may not be performed correctly or as
higher than “VOL 30,” the unit automatically changes
intended. In this case, visit the following JVC web
the volume level to “VOL 30.”
site:
For iPod users: <http://www.jvc.co.jp/english/
DAB tuner operations
car/support/ks-pd100/index.html>
• Only primary DAB services can be presetted even
For D. player users: <http://www.jvc.co.jp/
when you store a secondary service.
english/car/support/ks-pd500/index.html>
• A previously preset DAB service is erased when a new
DAB service is stored in the same preset number.
Troubleshooting
What appears to be trouble is not always serious. Check the following points before calling a service center.
Symptoms Remedies/Causes
• Sound cannot be heard from the speakers. • Adjust the volume to the optimum level.
• Check the cords and connections.
General
• The unit does not work at all. Reset the unit (see page 2).
• SSM automatic presetting does not work. Store stations manually.
FM/AM
• Static noise while listening to the radio. Connect the aerial firmly.
24
EN22-27KD-G531_003A_2.indd 24EN22-27KD-G531_003A_2.indd 24 11/13/06 11:44:48 AM11/13/06 11:44:48 AM
Symptoms Remedies/Causes
• Disc cannot be played back. Insert the disc correctly.
• CD-R/CD-RW cannot be played back.
• Insert a finalized CD-R/CD-RW.
• Tracks on the CD-R/CD-RW cannot be skipped.
• Finalize the CD-R/CD-RW with the component which
ENGLISH
you used for recording.
• Disc can neither be played back nor ejected. • Unlock the disc (see page 12).
• Eject the disc forcibly (see page 2).
Disc playback
• Disc sound is sometimes interrupted. • Stop playback while driving on rough roads.
• Change the disc.
• Check the cords and connections.
• “NO DISC” appears on the display. Insert a playable disc into the loading slot.
• Disc cannot be played back. • Use a disc with MP3/WMA tracks recorded in the
format compliant with ISO 9660 Level 1, Level 2,
Romeo, or Joliet.
• Add the extension code <.mp3> or <.wma> to the
file names.
• Noise is generated. Skip to another track or change the disc. (Do not add the
extension code <.mp3> or <.wma> to non-MP3 or
WMA tracks.)
• A longer readout time is required (“CHECK”
Do not use too many hierarchies and folders.
keeps flashing on the display).
• Tracks do not play back in the order you have
Playback order is determined when the files are recorded.
MP3/WMA playback
intended them to play.
• Elapsed playing time is not correct. This sometimes occurs during play. This is caused by how
the tracks are recorded on the disc.
• “PLEASE” and “EJECT” appear alternately on
Insert a disc that contains MP3/WMA tracks.
the display.
• Correct characters are not displayed (e.g.
This unit can only display letters (upper case), numbers,
album name).
and a limited number of symbols.
• “NO DISC” appears on the display. Insert a disc into the magazine.
• “NO MAG” appears on the display. Insert the magazine.
• “RESET 8” appears on the display. Connect this unit and the CD changer correctly and press
the reset button of the CD changer.
CD changer
• “RESET 1” – “RESET 7” appears on the display. Press the reset button of the CD changer.
• The CD changer does not work at all. Reset the unit (see page 2).
Continued on the next page
25
EN22-27KD-G531_003A_2.indd 25EN22-27KD-G531_003A_2.indd 25 11/13/06 6:17:48 PM11/13/06 6:17:48 PM
Symptoms Remedies/Causes
• “noSIGNAL” appears on the display.
Move to an area with stronger signals.
• “RESET 8” appears on the display. Connect this unit and the DAB tuner correctly and reset
the unit (see page 2).
ENGLISH
DAB
• “ANTENANG” appears on the display. Check the cords and connections.
• The DAB tuner does not work at all. Reconnect this unit and the DAB tuner correctly and reset
the unit (see page 2).
• The iPod or D. player does not turn on or does
• Check the connecting cable and its connection.
not work.
• Update the firmware version.
•
Charge the battery.
• The sound is distorted. Deactivate the equalizer either on the unit or the
iPod/D. player.
• “NO IPOD” or “NO DP” appears on the display. • Check the connecting cable and its connection.
• Charge the battery.
• Playback stops. The headphones are disconnected during playback.
Restart the playback operation using the control panel
(see page 19).
• No sound can be heard when connecting an
• Disconnect the headphones from the iPod nano.
iPod nano.
• Update the firmware version of the iPod nano.
• No sound can be heard.
Disconnect the adapter from the D. player. Then, connect
• “ERROR 01” appears on the display when
it again.
iPod/D. player playback
connecting a D. player.
• “NO FILES” or “NO TRACK” appears on the
No tracks are stored. Import tracks to the iPod or
display.
D. player.
• “RESET 1” – “RESET 7” appears on the display. Disconnect the adapter from both the unit and iPod/
D. player. Then, connect it again.
• “RESET 8” appears on the display. Check the connection between the adapter and this unit.
• The iPod’s or D. player’s controls do not work
Reset the iPod or D. player.
after disconnecting from this unit.
• Microsoft and Windows Media are either registered trademarks or trademarks of Microsoft Corporation in the
United States and/or other countries.
• iPod is a trademark of Apple Computer, Inc., registered in the U.S. and other countries.
26
EN22-27KD-G531_003A_1.indd 26EN22-27KD-G531_003A_1.indd 26 10/30/06 11:15:25 PM10/30/06 11:15:25 PM
Оглавление
- CONTENTS
- Control panel
- Remote controller — RM-RK50
- ⁄ Adjust the volume.
- Radio operations
- ~ The last selected PTY code
- Disc operations
- ~
- Sound adjustments
- General settings — PSM
- DAB tuner operations
- iPod / D. player operations
- ~
- Other external component
- Ÿ Turn on the connected component and
- More about this unit
- Troubleshooting
- Specifications
- INHALT
- Bedienfeld
- Fernbedienung — RM-RK50
- ⁄ Stellen Sie die Lautstärke ein.
- Bedienung des Tuners
- ~ Der zuletzt
- Bedienung der Disc
- ~
- Klangeinstellungen
- Allgemeine Einstellungen
- DAB-Tuner-Funktionen
- iPod / D. player-
- ~
- Bedienung von anderen
- Ÿ Schalten Sie die angeschlossene
- Weitere Informationen zu Ihrem Receiver
- Störungssuche
- Technische Daten
- CОДЕРЖАНИЕ
- Панель управления
- Пульт дистанционного управления —
- ⁄ Настройте громкость.
- Операции с радиоприемником
- ~ Появляется
- Операции с дисками
- ~
- Настройки звучания
- Общие настройки—
- Операции с тюнером DAB
- Операции
- ~
- Другие операции с
- Ÿ Включите подключенное устройство
- Дополнительная
- Устранение проблем
- Технические характеристики