Beurer FCE 80: 8. What if there are problems?

8. What if there are problems?

Problem Cause Solution

The device does not

Is the battery at? > Charge the battery

respond after switching

w Initial use

on.

w Charging the battery

The green LED is

Is the battery almost at? > Charge the battery

ashing.

w Initial use

w Charging the battery

Fault during battery

Is the power supply unit not plugged in

> Plug the power supply unit into

charging. After putting

correctly?

the mains socket

the device on the

Is the plug on the mains cable not

> Insert the plug into the back of

charger, the red LED

correctly inserted into the charger?

the charger

does not light up.

Is the device not correctly positioned on

> Remove the device and replace it

the charger?

on the charger. The charger must

be standing up straight and the

device may not tip over.

Are the battery contacts of the device and

> Using alint-free cloth, clean

charger dirty?

the contacts of the charger and

device

The device is not fully

Is the device being used for the rst time?

> If the battery has been

charged after 2 hours.

Has it been six months or more since the

particularly heavily discharged,

The red LED is lit.

device was last used?

charging can take longer than 2

hours

9. Technical data

Dimensions (diameter x h) Approx. 7cm x 17.5cm with charger

Mains voltage/frequency 100-240V / 50/60Hz

Battery NiMH

Battery life Approx. 20 minutes per charge, life cycle approx. 500 charges

The unit is double-protected and thus corresponds to protection

Signs and symbols

class 2.

20