Sony SU-FL300L: Step 5: Safety measures to prevent toppling over 1 2 3

10 

(GB)

Step 5:  Safety measures to  prevent toppling over

WARNING

Be sure to take measures to prevent the TV Stand from 

toppling over, and causing possible injury and damage.

1

Attach the support belt.

1

Screw the support belt to the TV Stand with the 

supplied wood screw using the screwdriver.

2

Attach the support belt to the Table-Top Stand, and 

screw the belt with the supplied securing screw 

using a coin, etc.

3

Adjust the length by tightening the support belt 

while holding the Table-Top Stand.

2

Connect the cables.

Run the cables through the cable holders and the Rear 

Pillar holes.

Note

If the cables are not installed properly, they might be pinched 

and damaged, and could result in electric shock, etc.

3

Anchor the TV to the wall.

Prepare a strong, commercially-available rope or chain 

and wall anchor bracket for this purpose.

1

Secure the wall anchor bracket to a solid wall.

2

Pass the rope or chain through both holes of the 

anchor bolts and then tighten the other end of the 

rope or chain to the wall anchor bracket.

Strong rope or 

chain

Wall anchor bracket