JVC KD-G721: Title assignment

Indications Selectable settings, [reference page]

TAG DISP

TAG ON : [Initial]; Shows the Tag information while playing MP3/

Tag display

WMA tracks, [14].

TAG OFF : Cancels.

ENGLISH

AMP GAIN

You can change the maximum volume level of this unit.

Amplifier gain control

LOW PWR : VOL 00 – VOL 30 (Select this if the maximum power of

the speaker is less than 50 W to prevent them from being

damaged.)

HIGH PWR : [Initial]; VOL 00 – VOL 50

IF BAND

AUTO : [Initial]; Increases the tuner selectivity to reduce

Intermediate frequency

interference noises between close stations. (Stereo effect

filter

may be lost.)

WIDE : Subject to interference noises from adjacent stations, but

sound quality will not be degraded and the stereo effect

will remain.

Title assignment

You can assign titles to CDs (both in the unit

2 Move to the next (or previous)

and the CD changer). You can assign up to 30

character position.

discs and each title up to 32 characters.

• You cannot assign a title to a CD Text, an

MP3/WMA disc, or a USB memory.

1 Select the sources.

3 Repeat steps 1 and 2 until you

• For CDs in this unit: Insert a CD.

finish entering the title.

• For CDs in the CD changer: Select

“CD-CH,” then select a disc number.

4 Finish the procedure.

2 Enter the title assignment mode.

To erase the entire title

In step 2 on the left...

Ex.: When “CD“ is selected as the source

3 Assign a title.

Available characters

1 Select a character.

18

EN18-23_KD-G722[EY]_006A_f.indd 18EN18-23_KD-G722[EY]_006A_f.indd 18 12/15/05 11:38:00 AM12/15/05 11:38:00 AM