JVC KD-G507: SOUND ADJUSTMENTS

SOUND ADJUSTMENTS: JVC KD-G507

SOUND ADJUSTMENTS

Selecting preset sound modes

Indication For: Preset values

BAS TRE LOUD

(C-EQ: custom equalizer)

USER (Flat sound) 00 00 OFF

You can select a preset sound mode (C-EQ:

ROCK Rock or +03 +01 ON

ENGLISH

custom equalizer) suitable to the music genre.

disco music

CLASSIC Classical +01 –02 OFF

music

Select the sound mode you want.

POPS Light music +04 +01 OFF

Each time you press the

HIP HOP Funk or rap +02 00 ON

button, the sound modes

music

change as follows:

JAZZ Jazz music +02 +03 OFF

USER

Note:

You can adjust each sound mode to your preference.

ROCK

Once you make an adjustment, it is automatically

stored for the currently selected sound mode. See

“Adjusting the sound” on page 21.

CLASSIC

POPS

HIP HOP

JAZZ

Indication pattern changes for each

sound mode except for “USER.

Ex.: When you select “ROCK”

20

EN20-21_KD-G507[EE]f.p65 11/21/03, 2:45 PM20

1

*

When you adjust the bass, treble, or loudness, the

Adjusting the sound

adjustment you have made is stored for the

currently selected sound mode (C-EQ) including

You can adjust the sound characteristics to your

“USER.

preference.

2

*

If you are using a two-speaker system, set the fader

ENGLISH

level to “00.

1

Select the item you want to adjust.

3

*

Normally the control dial work as the volume

Each time you press the

control. So you do not have to select “VOL” to

button, the adjustable items

adjust the volume level.

change as follows:

4

*

Depending on the amplifier gain control setting.

(See page 24 for details.)

2

Adjust the setting.

BAS

TRE

FAD

(bass)

(treble)

(fader)

To increase the level or

VOL

LOUD

BAL

turn on the loudness

(volume)

(loudness)

(balance)

Indication To do: Range

To decrease the level or

1

turn off the loudness

BAS*

Adjust the bass. –06 (min.)

|

Indication pattern changes as

+06 (max.)

you adjust the bass or treble.

1

TRE*

Adjust the treble. –06 (min.)

|

+06 (max.)

2

FAD*

Adjust the front R06 (Rear only)

and rear speaker |

Ex. 1: When you adjust “TRE” (treble)

balance. F06 (Front only)

BAL Adjust the left L06 (Left only)

and right speaker |

balance. R06 (Right only)

1

LOUD*

Boost low and

high frequencies LOUD ON

Ex. 2: When you turn on the loudness

to produce a well- |

balanced sound LOUD OFF

3

Repeat steps

1

and

2

to adjust the

at low volume

other items.

level.

3

VOL*

Adjust the volume. 00 (min.)

|

To reset each sound mode to the factory

4

30 or 50 (max.)*

settings, repeat the same procedure and

reassign the preset values listed in the table on

page 20.

21

EN20-21_KD-G507[EE]f.p65 11/21/03, 2:45 PM21