Sony CPD-E100E: Self-diagnosis function Specifications

C:\WIN95-E\DESKTOP\CPD E100\386765911CPDE100EAEP\01GB03BAS-AEP.fm

masterpage:Left

Self-diagnosis function

Specifications

This monitor is equipped with a self-diagnosis function. If there is

a problem with your monitor or computer, the screen will go

CRT 0.24 mm aperture grille pitch (center)

blank and the 1 (power) indicator will either light up green or

15 inches measured diagonally

flash orange. If the 1 (power) indicator is lit in orange, the

90-degree deflection

computer is in power saving mode. Try pressing any key on the

Viewable image size Approx. 285 × 214 mm (w/h)

1

1

keyboard.

(11

/

4

× 8

/

2

inches)

14.0" viewing image

Resolution

Maximum Horizontal: 1280 dots

MENU

RESET

Vertical: 1024 lines

Recommended Horizontal: 800 dots

Vertical: 600 lines

1

(power) indicator

Standard image area Approx. 270 × 202 mm (w/h)

3

(10

/

4

× 8 inches)

Deflection frequency* Horizontal: 30 to 70 kHz

If the

1

(power) indicator is green

Vertical: 48 to 120 Hz

AC input voltage/current 100 to 240 V, 50 – 60 Hz, 1.2 – 0.6 A

1

Disconnect the video input cable or turn off the

Power consumption Max. 95 W

connected computer.

Dimensions

Approx. 356

×

378

×

388 mm (w/h/d)

1

3

(14

/

8

× 15 × 15

/

8

inches)

2

Press the

1

(power) button twice to turn the monitor

Mass Approx. 14 kg (30 lb 14 oz)

off and then on.

Plug and Play DDC1/DDC2B

Supplied accessories See page 6

3

Move the control button

,

for 2 seconds before the

monitor enters power saving mode.

* Recommended horizontal and vertical timing condition

MENU

• Horizontal sync width should be more than 1.0 µsec.

• Horizontal blanking width should be more than 3.6 µsec.

• Vertical blanking width should be more than 500 µsec.

Design and specifications are subject to change without notice.

If all four color bars appear (white, red, green, blue), the monitor

is working properly. Reconnect the video input cable and check

the condition of your computer.

If the color bars do not appear, there is a potential monitor failure.

Inform your authorized Sony dealer of the monitor’s condition.

If the

1

(power) indicator is flashing orange

Press the

1

(power) button twice to turn the monitor off

and then on.

If the 1 (power) indicator lights up green, the monitor is working

properly.

If the 1 (power) indicator is still flashing, there is a potential

monitor failure. Count the number of seconds between orange

flashes of the 1 (power) indicator and inform your authorized

Sony dealer of the monitor’s condition. Be sure to note the model

name and serial number of your monitor. Also note the make and

model of your computer and video board.

16

3-867-659-

CPD-E100E

11

(1)