Sony CPD-E100E: Additional settings (DEGAUSS/ Resetting the adjustments CANCEL MOIRE)
Additional settings (DEGAUSS/ Resetting the adjustments CANCEL MOIRE): Sony CPD-E100E
Table of contents
- Owner’s Record
- Table of Contents
- Precautions
- Identifying parts and controls RearFront
- Setup Step 1:Connect your monitor to your computer Step 2:Connect the power cord
- Step 3:Turn on the monitor and Selecting the on-screen menu computer language (LANGUAGE/ INFORMATION)
- Customizing Your Monitor Navigating the menu
- Adjusting the brightness and contrast
- Adjusting the horizontal size or Adjusting the curvature of the centering of the picture (H-SIZE/ picture’s sides (PIN/PIN BALANCE) CENTER) Adjusting the angle of the picture’s sides (KEY/KEY BALANCE) Adjusting the vertical size or centering of the picture (V-SIZE/ CENTER)
- Adjusting the picture’s rotation Adjusting the color of the picture (ROTATION) (COLOR) Enlarging or reducing the picture (ZOOM)
- Additional settings (DEGAUSS/ Resetting the adjustments CANCEL MOIRE)
- Technical Features Troubleshooting
- Trouble symptoms and remedies Symptom Check these items
- Symptom Check these items
- Self-diagnosis function Specifications
C:\WIN95-E\DESKTOP\CPD E100\386765911CPDE100EAEP\01GB03BAS-AEP.fm
masterpage:Left
Additional settings (DEGAUSS/
Resetting the adjustments
CANCEL MOIRE)
This monitor has the following three reset methods. Use the
RESET button to reset the adjustments.
You can manually degauss (demagnetize) the monitor, and adjust
the moire cancellation level.
1
Press the center of the control button.
The main MENU appears on the screen.
2
Move the control button
m
/
M
to highlight
DEGAUSS/CANCEL MOIRE and press the center of
Resetting a single adjustment item
the control button again.
The DEGAUSS/CANCEL MOIRE menu appears on the
Use the control button to select the adjustment item you want to
screen.
reset, and press the RESET button.
3
Move the control button
m
/
M
to select the desired
Resetting all of the adjustment data for the
adjustment item.
Adjust the selected item according to the following
current input signal
instructions.
Press the RESET button when no menu is displayed on the screen.
Note that the following items are not reset by this method:
Degaussing the screen
• on-screen menu language (page 7)
The monitor is automatically demagnetized (degaussed) when the
• picture’s rotation (page 11)
power is turned on.
To manually degauss the monitor, first move the
Resetting all of the adjustment data for all input
control button
m
/
M
to select (DEGAUSS). Then move
signals
the control button
,
.
The screen is degaussed for about 5 seconds. If a second degauss
Press and hold the RESET button for more than two seconds.
cycle is needed, allow a minimum interval of 20 minutes for the
Note that the following item is not reset by this method:
best result.
• color menu user settings (page 11)
Adjusting the moire*
If elliptical or wavy patterns appear on the screen, adjust the
moire cancellation level.
To adjust the amount of moire cancellation, first move
the control button
m
/
M
to select (CANCEL MOIRE).
Then move the control button
<
/
,
until the moire
effect is at a minimum.
* Moire is a type of natural interference which produces soft, wavy lines
on your screen. It may appear due to interference between the pattern
of the picture on the screen and the phosphor pitch pattern of the
monitor.
Example of moire
12
3-867-659-
CPD-E100E
11
(1)
RESET
