Yamaha RX-V1065 Black: INTRODUCTION

INTRODUCTION

Features

■ Built-in 7-channel power amplifier

■ Digital audio decoders

• Minimum RMS Output Power (20 Hz to 20 kHz, 0.08%

• Dolby TrueHD, Dolby Digital Plus decoder

THD, 8 Ω)

• DTS-HD Master Audio, DTS-HD High Resolution

• FRONT L/R: 105 W + 105 W

Audio, DTS Express

• CENTER: 105 W

• Dolby Digital/Dolby Digital EX decoder

• SURROUND L/R: 105 W + 105 W

• DTS, DTS 96/24 decoder, DTS-ES Matrix 6.1, DTS-ES

• SURROUND BACK L/R: 105 W + 105 W

Discrete 6.1

• Dolby Pro Logic/Dolby Pro Logic II/Dolby Pro Logic

■ Speaker/Preout outputs

IIx decoder

• Speaker terminals (7-channel), extra speaker terminals

• DSD decoder

(2-channel for presence or Zone2), preout jacks (7.1-

•

DTS NEO:6 decoder

channel)

■ Sophisticated FM/AM tuner

■ Input/Output terminals

• 40-station random and direct preset tuning

Input terminals

• Automatic preset tuning

• HDMI input x 4

• Radio Data System tuning

• Audio/Visual input

■

HDMI™ (High-Definition Multimedia Interface)

[Audio] Digital input (coaxial) x 2, digital input

• HDMI interface for standard, enhanced or high-

(optical) x 2, analog input x 2

definition video as well as multi-channel digital audio.

[Video] Component video x 2, S-video x 1, Video x 4

– Automatic audio and video synchronization (lip sync)

• Audio input (analog) x 2

information capability

• Phono input (analog) x 1

– Deep Color video signal (30/36 bit) transmission

• Multi-channel audio input (7.1-channel)

capability

• V-AUX input

– “x.v.Color” video signal transmission capability

[Audio] Analog x 1

– High refresh rate and high resolution video signals

[Video] Video x 1

capability

• DOCK terminal to connect a Yamaha iPod universal

– High definition digital audio format signals capability

dock (such as YDS-11, sold separately) or Bluetooth

• Analog to analog and HDMI digital video up-

wireless audio receiver (such as YBA-10, sold

conversion (video ↔ component video → HDMI)

separately)

capability for monitor out

• USB port to connect a USB storage device

•

Analog video input up-scaling for HDMI digital video

Output terminals

output 480i(576i) or 480p(576p)

→

720p, 1080i or 1080p

• Monitor output

• HDMI control function supported

[Audio/Video] HDMI x 1

■ Automatic speaker setup features

[Video] Component video x 1, Video x 1

• “YPAO” (Yamaha Parametric Room Acoustic

• Audio/Visual output

Optimizer) for automatically optimizing speaker

[Audio] Analog x 1

outputs suitable for listening environments.

[Video] Video x 1

• Audio output

■ Other features

Analog x 1

• 192-kHz/24-bit D/A converter

• Zone2 output

• GUI (graphic user interface) menus to optimize this unit

Analog x 1

to suit individual audiovisual system

• iPod and USB file browsing and album art display

Other terminals

capability

Remote input x 1, Remote output x 1

• Pure Direct mode for pure hi-fi sound for all sources

Trigger output x 1

• Adaptive dynamic range controlling capability

■ Proprietary Yamaha technology for the

• SCENE function for changing input sources and sound

creation of sound fields

field programs with one key

• CINEMA DSP 3D

• Bi-amplification connection capability

• Compressed Music Enhancer mode

• Sleep timer

• Virtual CINEMA DSP

• Multi-zone function

• SILENT CINEMA

2 En

About this manual

• Some operations can be performed by using either the keys on the front panel or the ones on the remote control. In case the key names differ between

the front panel and the remote control, the key name on the remote control is given in parentheses.

• This manual is printed prior to production. Design and specifications are subject to change in part as a result of improvements, etc. In case of

INTRODUCTION

differences between the manual and product, the product has priority.

• For better viewing, we increase the size of characters used in example screen images in this manual. Therefore the size ratio of characters to other

objects (such as icons) may be different from that of the actual display image.

• “KMAIN ZONE ON/OFF” or “dHDMI 1” (example) indicates the name of the parts on the front panel or the remote control. Refer to the

attached sheet or “Part names and functions” (page 4).for the information about each position of the parts.

• ☞ indicates the page describing the related information.

• y indicates a tip for your operation.

Bluetooth

™

Bluetooth is a registered trademark of Bluetooth SIG and is used by

PREPARATION

Yamaha in accordance with a license agreement.

Manufactured under license from Dolby Laboratories.

Dolby, Pro Logic and the double-D symbol are trademarks of Dolby

Laboratories

“HDMI”, the “HDMI” logo and “High-Definition Multimedia

Interface” are trademarks, or registered trademarks of HDMI

Licensing LLC.

Manufactured under license under U.S. Patent No’s:

x.v.Color

OPERATION

5,451,942;5,956,674;5,974,380;5,978,762;6,226,616;6,487,535 &

“x.v.Color” is a trademark of Sony Corporation.

other U.S. and worldwide patents issued & pending. DTS is a

BASIC

registered trademark and the DTS logos, Symbol, DTS-HD and DTS-

HD Master Audio are trademark of DTS, Inc. © 1996-2007 DTS, Inc.

All Rights Reserved.

“SILENT CINEMA” is a trademark of Yamaha Corporation.

iPod™

“iPod” is a trademark of Apple Inc., registered in the U.S. and other

countries.

OPERATION

ADVANCED

Supplied accessories

Check that you received all of the following parts.

• Remote control (page 7)

• Batteries (2) (AAA, R03, UM-4) (page 9)

• Optimizer microphone (page 20)

INFORMATION APPENDIX

ADDITIONAL

• AM loop antenna (page 18)

• Indoor FM antenna (page 18)

English

3 En

Part names and functions

Front panel

HDMI

THROUGH

VOLUME

ON/OFF

ZONE2

CONTROL

ZONE2

INFO

MEMORY

l

PRESET

h

FM AM TUNING

l

h

SCENE

BD/DVD

TV

CD

RADIO

MAIN

ZONE

PROGRAM

INPUT

PHONES

TONE

CONTROL

STRAIGHT

PURE DIRECT

OPTIMIZER

MIC

VIDEO

AUX

USB

ON/OFF

SILENT

CINEMA

EFFECT

VIDEO

AUDIO

A ZONE2 ON/OFF

N PROGRAM selector

Switches the zone function on and off (page 54).

Changes sound field programs (page 26).

B HDMI THROUGH

O STRAIGHT

Lights up in the following cases while this unit is on standby.

Toggles between the selected sound field program and straight

• when the HDMI control function is on

decode mode (page 29).

• when the HDMI signal standby-through function is currently

P SCENE

working

Switches between linked sets of input sources and sound field

C ZONE2 CONTROL

programs (page 23).

Enables operation of a receiver set in Zone2, including input

Q PURE DIRECT

source switching, volume control and tuner operation, with the

Changes mode to Pure Direct mode (page 24). This key lights up

main amplifier or remote control after this key is pressed

when Pure Direct mode is on.

(page 54).

R INPUT selector

D INFO

Selects an input source (page 23).

Changes information (input, DSP program, audio decoder, etc)

S OPTIMIZER MIC jack

displayed on the front panel display (page 25).

For connecting the supplied optimizer microphone and adjusting

E MEMORY

output characteristics of speakers (page 20).

Registers FM/AM stations as preset stations (page 31).

T VIDEO (VIDEO AUX) jack

F PRESET l / h

For connecting the video output cable of a camcorder or game

Selects an FM/AM preset station (page 31).

console (page 18).

G FM/AM

U AUDIO L/R (VIDEO AUX) jack

Change the tuner bands between FM and AM.

For connecting the audio output cable of a camcorder or game

H TUNING l / h

console (page 18).

Changes FM/AM frequencies.

V USB port

I Front panel display

For connecting a USB memory device or USB portable audio

Displays information on this unit (page 6).

player (page 18)

J VOLUME control

Controls the volume of this unit (page 23).

K MAIN ZONE ON/OFF

Turns this unit on and off (page 19).

L PHONES jack

For plugging headphones (page 25).

M TONE CONTROL

Adjusts high-frequency/low-frequency output of speakers

(page 24).

4 En

Part names and functions

Rear panel

INTRODUCTION

DOCK

HDMI OUT

HDMI 1

HDMI 2

HDMI 3

HDMI 4

(

BD/DVD

)

EXTRA SP

ZONE2/PRESENCE

PHONO ANTENNA

S VIDEO

MONITOR OUT

SPEAKERS

COMPONENT

SINGLE

VIDEO

UNBAL.

COMPONENT

FM

GND

AM

VIDEO

REMOTE

PR

PR

IN

PREPARATION

GND

OUT

PB

PB

VIDEO

VIDEO

Y

Y

0.1A MAX.

12V

FRONT

CENTER

SURROUND

SURROUND BACK/

TRIGGER OUT

BI-AMP

CENTER

SINGLE

CENTER

OPTICAL

COAXIAL

COAXIAL

OPTICAL

(

TV

)

(

CD

)

FRONT

SURROUND

SUR.BACK

SUBWOOFER

FRONT

SURROUND

SUR. BACK SUBWOOFER

12

AV

1

AV 2

AV 3

AV 4

AV 5

AV 6

OUT

AV

AUDIO1

AUDIO2

MULTI CH INPUT

AUDIO

OUT

ZONE2

OUT

PRE OUT

OPERATION

BASIC

a DOCK terminal

j MULTI CH INPUT jacks

For connecting an optional Yamaha iPod universal dock (YDS-

For connecting a player that supports a multi-channel output

11) or Bluetooth wireless audio receiver (YBA-10) (page 17).

(page 16).

b PHONO jacks

k AUDIO OUT jacks

OPERATION

ADVANCED

For connecting a turntable (page 15).

Outputs audio signals from a selected analog input source to an

external component (page 15).

c ANTENNA terminals

For connecting supplied FM and AM antennas (page 18).

l ZONE2 OUT jacks

Outputs sound of this unit to an external amplifier set in a

MONITOR OUT jacks

different zone (page 53).

Outputs visual signals from this unit to a video monitor, such as

a TV (page 14).

m PRE OUT jacks

Outputs multi-channel signals from up to 7.1 channels to an

REMOTE IN/OUT jacks

external amplifier (page 17).

For connecting an external component that supports the remote

INFORMATION APPENDIX

ADDITIONAL

control function (page 17).

TRIGGER OUT jack

For connecting an external terminal with a trigger input terminal

to operate it linked with operation of this unit. For example,

when an electric screen that supports a trigger input is

connected, it opens and closes linked with operation of an input

source selected in this unit.

d HDMI OUT/HDMI 1-4 jacks

For connecting an HDMI-compatible video monitor or external

components for HDMI inputs 1-4 (pages 14 and 15).

e SPEAKERS terminals

For connecting front, center, surround and surround back

speakers (page 11). Connect the presence speakers (page 11) or

the speakers for Zone2 (page 53) to EXTRA SP terminals.

f Power cable

Connect this cable to an AC wall outlet (page 19).

g AV 1-6 jacks

For connecting external components for audio/visual inputs 1-6

(page 15).

h AV OUT jacks

English

Outputs audio/visual signals from a selected analog input source

to an external component (page 15).

i AUDIO 1/2 jacks

For connecting external components for audio inputs 1-2

(page 15).

5 En

Part names and functions

Front panel display

SLEEP

VOL.

STEREO

ZONE

3

TUNED

2

MUTE

SW

PL PR

C

LR

SL SR

SBL SB SBR

a HDMI indicator

h VOLUME indicator

Lights up during normal communication when HDMI is

Displays volume levels.

selected as an input source.

i Cursor indicators

b CINEMA DSP indicator

Light up if corresponding cursors on the remote control are

Lights up when a sound field program that uses CINEMA DSP

available for operations.

is selected.

j Multi information display

c CINEMA DSP 3D indicator

Displays menu items and settings for the current operation.

Lights up when CINEMA DSP 3D is activated.

k Speaker indicators

d Tuner indicator

Indicate speaker terminals from which signals are currently

Lights up during receiving radio broadcast signals from an FM/

output.

AM station (page 30).

e ZONE2 indicator

Lights up when Zone2 is turned on.

f SLEEP indicator

Lights up when the sleep timer is activated (page 38).

g MUTE indicator

Flashes when audio is muted.

6 En

Subwoofer

Center

SW

Presence L Presence R

PL PR

C

Front L

LR

Front R

Surround L

SL SR

Surround R

Surround back L

SBL SB SBR

Surround back R

Surround back

Part names and functions

Remote control

d Input selection keys

INTRODUCTION

a

MAIN

ZONE2

TRANSMIT

CODE SET

b

o

POWER

POWER

c

SOURCE

SLEEP

p

HDMI

PREPARATION

1234

AV

1234

AUDIO

e Tuner keys

d

1256

V-AU X

PHONO

USB DOCK

TUNER

MULTI

e

FM

AM

f INFO

OPERATION

PRESET

TUNING

Changes the information shown on the front panel display

INFO

MEMORY

BASIC

(page 25).

ENHANCER SUR. DECODE

g Sound selection keys

MOVIE

MUSIC

STEREO

g

Selects sound field programs (page 26).

STRAIGHT

PURE DIRECT

h SCENE

SCENE

Switches between linked sets of input sources and sound field

BD

h

DVD

TV

CD

RADIO

programs (page 23).

OPTIONON SCREEN

r

i ON SCREEN

OPERATION

ADVANCED

i

Displays the GUI screen (page 24).

ENTER

VOLUME

s

RETURN

DISPLAY

t

TOP

MENU

MENU

MUTE

k External component operation keys

REC

u

k

Operate recording, playback etc. of external components

INFORMATION APPENDIX

ADDITIONAL

(page 55).

l Numeric keys

1234

Enter numbers.

l

7856

m TV control keys

Enables operations of a TV or a projector (page 55).

90

10

ENT

n TRANSMIT

TV

INPUT

POWER

Lights up when a signal is output from the remote control.

m

TV VOL

TV CH

o CODE SET

MUTE

Sets remote control codes for external component operations

(page 55).

p POWER

Switches this unit on and standby (page 19).

q SLEEP

Switches the sleep timer operations (page 38).

r OPTION

Displays the Option menu (page 39).

s VOLUME +/–

Adjust the volume of this unit (page 23).

a Remote control signal transmitter

t DISPLAY

Transmits infrared signals.

Displays the play information on the video monitor.

English

b MAIN/ZONE2

When an iPod is connected: Changes the operation mode of the

Switches amplifiers (Main or Zone2) to be operated by the

iPod connected to the Yamaha iPod universal dock (page 34).

remote control (page 54).

u MUTE

c SOURCE POWER

Turns the mute function on and off (page 24).

Switches an external component on and off.

7 En

HDMI 1-4

Selects HDMI inputs 1 through 4.

AV 1-6

Selects AV inputs 1 through 6.

AUDIO 1/2

Selects AUDIO inputs 1 and 2.

V-AUX

Selects a signal input from the VIDEO AUX jacks.

PHONO

Selects a signal input from the PHONO jacks.

USB

Selects a USB device connected to the USB port.

DOCK

Selects a Yamaha iPod universal dock/Bluetooth

wireless audio receiver connected to the DOCK

terminal.

TUNER

Selects the FM/AM tuner.

q

MULTI

Selects a signal input from the MULTI CH

INPUT jacks.

FM/AM

Switches a band between FM and AM.

MEMORY

Presets radio stations.

PRESET k / n

Selects a preset station.

TUNING k / n

Changes FM/AM frequencies.

f

j Cursors k / n / l / h

Select menu items or change

j

settings.

ENTER

Confirms a selected item.

RETURN

Returns to the previous screen or

ends the menu display.