Yamaha DVD S1800 Black: SETUP MENU

SETUP MENU

2 Press / to select the desired main menu,

Setup menu operation

and then press ENTER.

➜ Menu items and setting items appear.

Setup is carried out on the TV screen, enabling you to

customize this unit to suit your own particular

SPEAKER

1/1

requirements. Follow the procedures below to start the

setup menu operations.

Size

Distance

Level

REPEAT

SA-CD

A B

ENTERCLEAR

SETUP

SLOW SEARCH

SETUP

STOP

PLAY

PAUSE

Move :

Return

Select : Enter

SKIP

ON SCREENTOP MENU

3 Press / to highlight the desired menu item.

➜ If the selected menu item has submenus, only a

/ / /

ENTER

right arrow is displayed on the side of the setting

ENTER

MENU RETURN

item. In this case, press , and then repeat step 3.

RETURN

SPEAKER

1/1

SA-CD Config

Config 1

CUT-OFF Frequency

100

SUBTITLE

AUDIO ZOOM

ANGLE

y

Move :

Return

Select : Enter

• Press RETURN to display the previous menu.

• Press SETUP to exit from the setup menu.

➜ If the selected menu item has only setting items,

• Refer to the following pages for details of the menu that

left and right arrows appear on both sides of the

requires a particular operation.

setting item.

1 Press SETUP.

AUDIO

1/1

➜ Main menus and menu items appear on your TV.

Analog Output

Stereo

SETUP

1/2

Digital Out

PCM

GENERAL

DVD-Audio mode

LPCM Output

96KHz

SA-CD mode

Night Listening Mode

Off

AUDIO

OSD Language

SPEAKER

Parental Rating

Parental Password

VIDEO

Screen Saver

HDMI

Auto Power Off

Move :

Return

Select : Enter

Sleep Timer

DISC

Move :

Return

Select : Enter

4 Press / to toggle the setting items or to

adjust the parameter.

28 En

SETUP MENU

English

General setup menu

Notes

• This setting is only available when no disc is loaded in the disc

SETUP

1/2

tray.

• Selected mode becomes effective after you close the setup

GENERAL

DVD-Audio mode

menu.

SA-CD mode

• When you select [CD], this unit does not play back SA-CD

AUDIO

OSD Language

discs which do not have CD layer.

SPEAKER

Parental Rating

Parental Password

VIDEO

Setting the OSD language

Screen Saver

HDMI

Auto Power Off

This menu contains various options for the on-screen

Sleep Timer

display (OSD) language. For details, see “Setting the OSD

DISC

(On-Screen Display) language” on page 17.

Move :

Return

Select : Enter

Restricting playback with parental

Selecting DVD-Audio mode

control

Some DVD-Audio discs contain the DVD-Video content

Some DVD discs have a parental level assigned to the

in addition to the DVD-Audio content. You can select

complete disc or to certain scenes on the disc. This feature

DVD-Audio or DVD-Video mode.

lets you set a playback limitation level.

• Select [DVD-Audio mode] in [GENERAL] menu.

The rating levels are from 1 to 8 and are country

dependent. You can prohibit playback of certain discs that

DVD-Audio

are not suitable for your children or play certain discs in

Select this to play back both DVD-Audio and DVD-Video

alternative scenes.

contents. Only the DVD-Audio content may be played

back depending on the disc.

1 Select [Parental Rating] in [GENERAL] menu.

DVD-Video

2 Enter your four-digit password using the

Select this to play back only the DVD-Video content.

numeric buttons (0-9). (For details about the

password, see “Changing the parental password”

Notes

below.)

• This setting is only available when no disc is loaded in the disc

➜ If the password is correct, [Parental Rating] is

tray.

enabled to select.

• Selected mode becomes effective after you close the setup

3 Press / to select the rating level.

menu.

• To disable parental controls and have all discs play,

y

select [Level 8].

• When a DVD-Audio disc is played back, the DVD AUDIO

indicator lights up.

Notes

• When you select [DVD-Video], the DVD AUDIO indicator

goes out.

• VCD, SVCD, CD and SA-CD have no level indication, so the

parental control function has no effect with these types of

discs.

Selecting SA-CD mode

• Some DVD discs are not encoded with a rating though the

movie rating may be printed on the disc cover. The rating level

Some SA-CD discs contain both SA-CD layer and the

feature does not work for such discs.

standard CD layer. You can select SA-CD or CD mode.

• Select [SA-CD mode] in [GENERAL] menu.

Changing the parental password

SA-CD

You can change the password for parental control. Enter

Select this to play back SA-CD layer.

your four-digit password when prompted on the screen.

CD

The default password is “2580”.

Select this to play back CD layer.

1 Select [Parental Password] in [GENERAL]

menu.

29 En

SETUP MENU

2 Enter your old four-digit password using the

Resetting the system

numeric buttons (0-9).

• When doing this for the first time, enter “2580”.

You can reset all options and your personal settings to the

initial factory settings, except [Parental Rating] and

➜ If the password is correct, the submenu appears.

[Parental Password].

3 Enter the new four-digit password using the

1 Select [Factory Default] in [GENERAL] menu.

numeric buttons (0-9).

➜ [Confirm Password] is highlighted.

2 Enter your four-digit password using the

numeric buttons (0-9). (For details about the

4 Enter the new four-digit password again.

password, see “Changing the parental password”

➜ The previous menu screen appears and the new

on page 29.)

four-digit password is now valid.

➜ The confirmation screen appears.

Setting the screen saver

GENERAL

2/2

You can turn on or off the screen saver.

Factory Default

. . . .. . . .

DivX Regis

• Select [Screen Saver] in [GENERAL] menu.

Factory Default

On

Press [Yes] to confirm

Select this to turn on the screen saver when disc playback

is stopped for more than 15 minutes.

Yes

No

Off

Select this to disable the screen saver function.

Move :

Return

Select : Enter

Setting the auto power function

3 Press / to select [Yes] to reset the system,

You can set the auto standby mode.

and then press ENTER.

• Select [Auto Power Off] in [GENERAL] menu.

➜ All settings are reset to the initial factory settings.

Mode 1

Displaying the DivX

®

VOD registration

Select this to set this unit to the standby mode

automatically when disc playback is stopped for more

code

than 30 minutes or disc playback is continued for more

Yamaha provides you with the DivX

®

VOD (Video On

than six hours without operation.

Demand) registration code that allows you to rent and

Mode 2

purchase videos using the DivX

®

VOD service.

Select this to set this unit to the standby mode

For more information, visit at www.divx.com/vod.

automatically when disc playback is stopped for more

1

Select [DivX Registration] in [GENERAL] menu.

than 30 minutes.

2 Press .

Off

➜ The registration code appears.

Select this to disable the auto power off function.

3 Press ENTER to return to the previous menu.

Setting the sleep timer

y

To purchase or rent the videos from DivX

®

VOD service at

You can set this unit to the standby mode automatically

www.divx.com/vod, use the registration code and download the

after a certain elapsed period.

video onto a CD-R for playback on this unit.

• Select [Sleep Timer] in [GENERAL] menu.

Notes

30min, 60min, 90min, 120min, 150min

• All videos downloaded from DivX

®

VOD can only be played

Select one to set the sleep timer function.

back on this unit.

®

Off

• The time search function is not available during DivX

movie

playback.

Select this to cancel the sleep timer function.

30 En

SETUP MENU

English

Audio setup menu

Setting the LPCM output

Set the LPCM output if you have connected this unit to a

PCM-compatible receiver via a digital terminal, such as

SETUP

1/1

the coaxial or optical terminals.

GENERAL

Analog Output

Discs are recorded at a certain sampling rate. The higher

Digital Out

the sampling rate, the better the sound quality.

AUDIO

LPCM Output

• Select [LPCM Output] in [AUDIO] menu.

SPEAKER

Night Listening Mode

48KHz

VIDEO

Select this to play back discs recorded at the sampling rate

HDMI

of 48 kHz. All 96 kHz PCM data streams (if available) are

converted to the sampling rate of 48 kHz.

DISC

Move :

Return

Select : Enter

96KHz

Select this to play back discs recorded at the sampling rate

of 96 kHz. If the 96 kHz disc is copy protected, the digital

output is automatically converted to a sampling rate of 48

Setting the analog output

kHz.

Set the analog output to match the playback capability of

this unit.

Setting the night listening mode

• Select [Analog Output] in [AUDIO] menu.

In this mode, high volume output is softened and low

Stereo

volume output is brought upward to an audible level. It is

Select this to change channel output to stereo, which only

useful when you watch your favorite action movie without

delivers sound from the two front speakers.

disturbing others at night.

Multi-Channel

• Select [Night Listening Mode] in [AUDIO]

Select this when using a multi-channel audio/(video)

menu.

receiver with 6 channel inputs. In this mode, this unit

On

performs DTS decoding or Dolby Digital 5.1-channel

Select this to level out the volume. This feature is only

decoding when applicable.

available for movies with Dolby Digital mode.

Off

Setting the digital output

Select this when you want to enjoy the full dynamic range

Set the digital output according to your optional audio

of surround sound.

component connections.

• Select [Digital Out] in [AUDIO] menu.

Note

This mode is only effective for analog output.

All

Select this if you have connected the digital audio output

jack to a multi-channel decoder/receiver.

PCM

Select this only if your receiver is not capable of decoding

multi-channel audio signals.

Off

Select this to turn off the digital output.

31 En

SETUP MENU

Initialize

Speaker setup menu

You can reset [Size] settings to the initial factory settings.

1 Select [Initialize] under [Size] in [SPEAKER]

SETUP

1/1

menu.

GENERAL

Size

2 Press .

Distance

➜ The confirmation screen appears.

AUDIO

Level

SPEAKER

3 Select [Yes] to reset the setting, and then press

SA-CD

ENTER.

VIDEO

➜ [Size] settings are reset to the initial factory

HDMI

settings.

DISC

Move :

Return

Select : Enter

Setting speaker distances

You can set the distances for individual speakers.

Placing all speakers except for the subwoofer at equal

Setting speaker sizes

distances from the listener is the most ideal way of the

speaker positioning in 5.1 channel system.

You can set the sizes for individual speakers.

• Select [Distance] in [SPEAKER] menu.

• Select [Size] in [SPEAKER] menu.

Unit

Front L/R

You can select the display unit of measurement.

Set the sizes for front L/R speakers.

Feet

Large

Select this to input speaker distances in feet.

Select this if the connected speakers are large.

Meter

Small

Select this to input speaker distances in meters.

Select this if the connected speakers are small.

Front L/R

Center, Surround L/R

Set the distance from your listening position to the front

Set the sizes for center/surround L/R speakers.

speakers. We recommend to place the front left speaker

Large

and right speaker at the same distance from the listening

Select this if the connected speakers are large.

position.

Small

Select this if the connected speakers are small.

Center

Off

Set the distance from your listening position to the center

Select this if no center/surround L/R speakers are

speaker.

connected.

Surround L/R

Subwoofer

Set the distance from your listening position to the

Select on or off for the subwoofer.

surround speakers. We recommend to place the surround

On

left speaker and right speaker at the same distance from

Select this if a subwoofer is connected.

the listening position.

Off

Control range: 0.3m to 12.0m (1ft to 40ft)

Select this if no subwoofer is connected.

Control step: 0.3m (1ft)

Notes

Notes

• These settings are not available for SA-CD discs. See “Setting

• For the [Center] setting, you cannot specify the distance

the SA-CD configuration” on page 33 for the SA-CD setting.

beyond the [Front L/R] setting or below the [Front L/R] setting

• [Center], [Surround L/R] and [Subwoofer] settings are not

minus 1.5m (5ft).

available when the [Analog Output] setting is set to [Stereo]

• For the [Surround L/R] setting, you cannot specify the distance

(see “Setting the analog output” on page 31).

beyond the [Front L/R] setting or below the [Front L/R] setting

minus 4.5m (15ft).

32 En

SETUP MENU

Initialize

Initialize

English

You can reset [Distance] settings to the initial factory

You can reset [Level] settings to the initial factory settings.

settings.

1 Select [Initialize] under [Level] in [SPEAKER]

1 Select [Initialize] under [Distance] in

menu.

[SPEAKER] menu.

2 Press .

2 Press .

➜ The confirmation screen appears.

➜ The confirmation screen appears.

3 Select [Yes] to reset the setting, and then press

3 Select [Yes] to reset the setting, and then press

ENTER.

ENTER.

➜ [Level] settings are reset to the initial factory

➜ [Distance] settings are reset to the initial factory

settings.

settings.

Setting the SA-CD configuration

Setting speaker levels

You can select speaker sizes and on/off statuses for

You can set the volume levels for individual speakers.

SA-CD discs. You can also select a cut-off (cross-over)

frequency for all low-frequency signals. All frequencies

• Select [Level] in [SPEAKER] menu.

below the selected frequency are sent to the subwoofer.

Front L, Center, Front R, Surround L, Surround R,

• Select [SA-CD] in [SPEAKER] menu.

Subwoofer

Set the volume levels for front L/R speakers, center

SA-CD Config

speaker, surround L/R speakers or subwoofer.

Select speaker sizes and on/off statuses from the following

Control range: 0dB to –12dB

three settings.

Control step: 1dB

Size or on/off

Test Tone

Speaker

Config 1 Config 2 Config 3

A test tone can be output to help you judge the volume

level of each speaker.

Front L/R Large Small Large

1 Select [Test Tone] under [Level] in [SPEAKER]

Center Large Small Small

menu.

Surround L/R Large Small Small

2 Press / to select [Off], [Manual] or [Auto].

Subwoofer On On Off

Off

Select this to output no test tone.

CUT-OFF Frequency

Manual

Select a cut-off (cross-over) frequency for all low-

Select this to output the test tone manually.

frequency signals. All frequencies below the selected

Auto

frequency are sent to the subwoofer.

Select this to output the test tone from each speaker

Control range: 60, 80, 100, 120 (Hz)

automatically.

3 For [Auto], press / to select [Yes] and then

press ENTER to output the test tone. For

[Manual], press / to select each speaker,

and then press ENTER to output the test tone.

Notes

• The test tone is not output from a center speaker, surround

speakers, and a subwoofer when the [Analog Output] setting is

set to [Stereo] (see “Setting the analog output” on page 31).

• These settings are only effective for analog output.

33 En

SETUP MENU

When the aspect ratio of your TV is 4:3:

Video setup menu

Playback

Setting

TV display

disc

SETUP

1/1

16:9

*2

GENERAL

TV Display

TV Type

4:3 Pan

AUDIO

Scan

Wide Screen Format

SPEAKER

Black Level

*1

4:3

Closed Caption*1

VIDEO

Still Mode

HDMI

Component

Scart Video Out

*2

16:9

DISC

4:3 Letter

Move :

Return

Select : Enter

Box

*1: [Black Level] and [Closed Caption] are only for U.S.A. and

4:3

Canada models.

*2: [Scart Video Out] is only for U.K., Europa, and Russia

models.

*1: The side of the picture may be stretched depending on the

TV. In this case, check the screen size and aspect ratio of

your TV.

Setting the TV display

*2: If the disc is not assigned to play back with panscan, it is

Set the aspect ratio of this unit to match your TV. The

played with letterbox.

format you select must be available on the disc.

• Select [TV Display] in [VIDEO] menu.

Setting the TV type

4:3 Pan Scan

This menu contains the options for selecting the color

Select this if the aspect ratio of your TV is 4:3. In this

system that matches your TV. For details, see “Step 3:

setting, both sides of the picture to be trimmed or

Setting a TV type” on page 16.

formatted to fit your TV screen.

4:3 Letter Box

Selecting the wide screen format

Select this if the aspect ratio of your TV is 4:3. In this

Set the aspect ratio of the projected images on the screen.

setting, a wide picture with black bands on the upper and

This function is only available for progressive scan and

lower portions of the TV screen are displayed.

HDMI output.

16:9

• Select [Wide Screen Format] in [VIDEO] menu.

Select this if you have a widescreen TV.

NL Stretch

■ The relationship between the setting of this

Select this to display of 4:3 image on the 16:9 screen with

unit and the TV display

non-linear stretching. (The center position of the screen is

When the aspect ratio of your TV is 16:9 (widescreen):

stretched less than the side.)

Playback

Pillar Box

Setting

TV display

disc

Select this to display 4:3 image on the 16:9 screen without

stretching. Even when this unit is playing a disc recorded

16:9

in the 16:9 squeeze mode, the picture is displayed in the

center of the screen.

16:9

Off

4:3

*1

Select this to make no aspect ratio adjustment.

34 En

SETUP MENU

English

Selecting the black level

Setting the still mode

(U.S.A. and Canada models only)

You can select the picture quality for pausing or frame-by-

frame playback.

If you set the [TV Type] to [NTSC] (see “Step 3: Setting a

TV type” on page 16), set this setting shift to [On] to

• Select [Still Mode] in [VIDEO] menu.

improve the color contrast during playback.

Frame

• Select [Black Level] in [VIDEO] menu.

Select this if the picture is unstable when you select

On

[Field].

Select this to enhance the black level.

Field

Off

Select this for the standard still mode setting. This setting

is suitable for playback of quick motion scenes.

Select this for the standard black level setting.

Notes

Selecting the scan function

• This function is only available for CVBS (composite video)

This function is only available if you have connected this

and S-video output.

unit to a progressive scan TV through the component

• This setting has no effect if the [TV Type] is set to [PAL] or

video jacks (see “Component video jacks <C>” on

[MULTI] (see “Step 3: Setting a TV type” on page 16).

page 12). This function is enable you to enjoy accurate

color reproduction and high quality images. This unit

Selecting the closed caption

features DCDi circuit.

(U.S.A. and Canada models only)

• Select [Component] in [VIDEO] menu.

Closed captions are data hidden in the video signals of

Progressive

specific discs, and are invisible without the use of a special

Select this to enable the progressive scan function. The

decoder. The difference between subtitles and captions is

confirmation screen appears if you select this. In this case,

that subtitles are intended for hearing persons and captions

select [Yes] and then press ENTER.

are for the hearing impaired. Subtitles rarely show all of

the audio. For example, captions show sound effects (e.g.,

Interlaced

“phone ringing” and “footsteps”), while subtitles do not.

Select this to enable the interlaced scan function.

Before you select this setting, please ensure that the disc

y

contains closed caption information and your TV set also

The P.SCAN indicator on the front panel display lights up during

supports this function.

progressive playback.

• Select [Closed Caption] in [VIDEO] menu.

Notes on activating progressive scan:

On

• While HDMI video signals are being output, component

video is fixed to interlaced video.

Select this to enable the closed caption function.

• In progressive mode, 4:3 aspect images are stretched

Off

horizontally on the widescreen TV. Change the aspect

Select this to disable the closed caption function.

ratio settings of your TV if you want to watch the

original aspect ratio images without distortion. You can

Note

also change the aspect ratio settings in [Wide Screen

This function is only available for CVBS (composite video) and

Format] menu (see “Selecting the wide screen format”

S-video output.

on page 34).

• Ensure that your TV is equipped with progressive scan.

• Connect using a component video cable.

35 En

SETUP MENU

HDMI setup menu

CONSUMERS SHOULD NOTE THAT NOT ALL HIGH

DEFINITION TELEVISION SETS ARE FULLY

COMPATIBLE WITH THIS PRODUCT AND MAY CAUSE

SETUP

1/1

ARTIFACTS TO BE DISPLAYED IN THE PICTURE. IN

CASE OF 525 OR 625 PROGRESSIVE SCAN PICTURE

GENERAL

HDMI Video

PROBLEMS, IT IS RECOMMENDED THAT THE USER

DVI Output Range

SWITCH THE CONNECTION TO THE “STANDARD

AUDIO

HDMI Audio

DEFINITION” OUTPUT. IF THERE ARE QUESTIONS

SPEAKER

REGARDING OUR VIDEO MONITOR COMPATIBILITY

WITH THIS MODEL 525P AND 625P DVD PLAYER,

VIDEO

PLEASE CONTACT OUR CUSTOMER SERVICE

HDMI

CENTER.

This unit is compatible with the complete line of Yamaha

DISC

products, including the projectors DPX-1300, DPX-830 and

Move :

Return

Select : Enter

the plasma monitor PDM-4220.

Switching the SCART video out

Setting the HDMI video

(U.K., Europe, and Russia models

You can adjust the resolution depending on the monitor

only)

you are using. This function is only available when this

unit is connected to an HDMI-compatible component via

Select this setting to toggle the video signal output from

the HDMI jack.

the AV terminal between CVBS (composite video) and

This unit is compatible with the following video formats:

RGB.

480p/60 Hz, 576p/50 Hz, 720p/50 Hz, 60 Hz, 1080i/50

• Select [Scart Video Out] in [VIDEO] menu.

Hz, 60 Hz, and 1080p/50 Hz, 60 Hz.

CVBS

• Select [HDMI Video] in [HDMI] menu.

Select this to output composite video signals.

480p/576p

RGB

Select this for 480/576 progressive-scan video.

Select this to output RGB video signals.

720p

Select this for 720 progressive-scan video.

Note

1080i

This unit does not output S-video signal from the AV terminal.

Select this for 1080 interlaced-scan video.

1080p

Select this for 1080 progressive-scan video.

Auto

Select this to set this unit to the best resolution setting

automatically based on your monitor.

Notes

• When [TV Type] is set to [NTSC] or [PAL], video signals with

480p or 576p are output accordingly.

• While HDMI video signals are being output, component video

is fixed to interlaced video.

• For settings other than [Auto], make sure that the selected

resolution is supported by the HDMI-compatible monitor you

are using.

If the selected resolution is not supported, this setting is

automatically switched to the most appropriate resolution, and

the newly selected resolution is displayed in the top left corner

of the display and in the front panel display temporarily.

• When you select [1080p] and use an HDMI cable longer than

5 m (16 ft), the picture quality may decrease.

36 En

SETUP MENU

y

English

• Refer to the manual supplied with your monitor to select the

DISC setup menu

appropriate aspect ratio.

• You can also select the HDMI resolution by pressing HDMI on

the remote control repeatedly.

SETUP

1/1

GENERAL

AUDIO Language

Selecting the DVI output range

Subtitle Language

AUDIO

DVD Menu Language

You can select the DVI output range to match the

SPEAKER

Angle Mark

connected component. This function is only available

PBC

when this unit is connected to an DVI-D-compatible

VIDEO

Time Interval

component via the HDMI jack.

HDMI

• Select [DVI Output Range] in [HDMI] menu.

DISC

Standard

Move :

Return

Select : Enter

Select this if you cannot see the correct image when you

select [Enhanced].

Enhanced

Selecting the default audio/subtitle/

Select this if black and white in the image is not distinct.

DVD menu language

These menus contain various language options for the

Setting the HDMI audio

audio, subtitles and disc menus recorded on the DVD. For

details, see “Setting the audio, subtitle and disc menu

Set the HDMI audio output to match the connected

languages” on page 17.

component. This function is only available when this unit

is connected to an HDMI-compatible component via the

HDMI jack.

Selecting an angle mark display

For details about the relationship between the audio

You can switch an angle mark display on or off when

format and the setting, see “HDMI audio output” on

sequences recorded from different camera angles are

page 13.

played back.

• Select [HDMI Audio] in [HDMI] menu.

• Select [Angle Mark] in [DISC] menu.

Auto

On

Select this to set this unit to the best setting automatically

Select this if you want to display an angle mark. An angle

based on the component you have connected via the

mark is displayed continuously.

HDMI jack.

Off

PCM

Select this if you do not want to display an angle mark. An

Select this to output the decoded multi-channel or 2ch

angle mark appears for five seconds, and then disappears.

linear PCM audio signals via the HDMI jack.

Off

Select this to turn off the HDMI audio output.

Notes

• SA-CD signals cannot be output using HDMI.

• When [HDMI Audio] is set to [Auto] or [PCM], digital output

signals are muted.

37 En