Yamaha BD-S671 Black: CAUTION: READ THIS BEFORE OPERATING YOUR UNIT.

CAUTION: READ THIS BEFORE OPERATING YOUR UNIT.

1 To assure the finest performance, please read this manual

18 Condensation will form when the surrounding temperature

carefully. Keep it in a safe place for future reference.

changes suddenly. Disconnect the power cable from the

2 Install this sound system in a well ventilated, cool, dry, clean

outlet, then leave this unit alone.

place-away from direct sunlight, heat sources, vibration, dust,

19 When using this unit for a long time, this unit may become

moisture, and/or cold. For proper ventilation, allow the

warm. Turn the power off, then leave this unit alone for

following minimum clearances.

cooling.

Top : 10 cm (4 in)

20 Install this unit near the AC outlet and where the AC power

Rear: 10 cm (4 in)

plug can be reached easily.

Side: 10 cm (4 in)

21 The batteries shall not be exposed to excessive heat such as

3 Locate this unit away from other electrical appliances,

sunshine, fire or the like.

motors, or transformers to avoid humming sounds.

4 Do not expose this unit to sudden temperature changes from

This unit is not disconnected from the AC power source

cold to hot, and do not locate this unit in an environment with

as long as it is connected to the wall outlet, even if this

high humidity (i.e. a room with a humidifier) to prevent

unit itself is turned off by p. This state is called the

condensation inside this unit, which may cause an electrical

standby mode. In this state, this unit is designed to

shock, fire, damage to this unit, and/or personal injury.

consume a very small quantity of power.

5 Avoid installing this unit where foreign object may fall onto

this unit and/or this unit may be exposed to liquid dripping or

splashing. On the top of this unit, do not place:

WARNING

– Other components, as they may cause damage and/or

TO REDUCE THE RISK OF FIRE OR ELECTRIC

discoloration on the surface of this unit.

SHOCK, DO NOT EXPOSE THIS UNIT TO RAIN OR

– Burning objects (i.e. candles), as they may cause fire,

MOISTURE.

damage to this unit, and/or personal injury.

– Containers with liquid in them, as they may fall and

The laser component in this product is capable of

liquid may cause electrical shock to the user and/or

emitting radiation exceeding the limit for Class 1.

damage to this unit.

6 Do not cover this unit with a newspaper, tablecloth, curtain,

etc. in order not to obstruct heat radiation. If the temperature

inside this unit rises, it may cause fire, damage to this unit,

and/or personal injury.

7 Do not plug in this unit to a wall outlet until all connections

are complete.

8 Do not operate this unit upside-down. It may overheat,

possibly causing damage.

9 Do not use force on switches, knobs and/or cords.

10 When disconnecting the power cable from the wall outlet,

grasp the plug; do not pull the cable.

11 Do not clean this unit with chemical solvents; this might

damage the finish. Use a clean, dry cloth.

12 Only voltage specified on this unit must be used. Using this

unit with a higher voltage than specified is dangerous and

may cause fire, damage to this unit, and/or personal injury.

Yamaha will not be held responsible for any damage resulting

from use of this unit with a voltage other than specified.

13 To prevent damage by lightning, keep the power cable

disconnected from a wall outlet or this unit during a lightning

storm.

14 Do not attempt to modify or fix this unit. Contact qualified

Yamaha service personnel when any service is needed. The

cabinet should never be opened for any reasons.

15 When not planning to use this unit for long periods of time

(i.e. vacation), disconnect the AC power plug from the wall

outlet.

16 Be sure to read the “TROUBLESHOOTING” section on

common operating errors before concluding that this unit is

faulty.

17 Before moving this unit, press p to set this unit to the

standby mode, and disconnect the AC power plug from the

wall outlet.

Caution-i En