JVC KD-G611: ~ Ÿ
~ Ÿ : JVC KD-G611
DAB tuner operations
Listening to the DAB tuner
ENGLISH
2 Select the desired ensemble frequencies.
~
Ÿ
What is DAB system?
DAB can deliver CD quality sound without
any annoying interference and signal
distortion. Furthermore, it can carry text,
! Start searching for an ensemble.
pictures, and data. When transmitting,
DAB combines several programmes (called
“services”) to form one “ensemble.” In
addition, each “service”—called “primary
When an ensemble is received,
service”—can also be divided into its
searching stops.
components (called “secondary service”).
To stop searching, press the same
A typical ensemble has six or more
button again.
programmes (services) broadcast at the same
time.
⁄ Select a service (either primary or
By connecting the DAB tuner, this receiver
secondary) to listen to.
can do the following:
•
Tracing the same programme automatically
—Alternative Reception (see “DAB AF” on
page 23).
It is recommended to use DAB (Digital
Audio Broadcasting) tuner KT-DB1000
To tune in to an ensemble manually
with your receiver. If you have another
In step ! above...
DAB tuner, consult your JVC IN-CAR
1
ENTERTAINMENT dealer.
• Refer also to the Instructions supplied for
your DAB tuner.
28
EN24-29_G612[EX_EU]f.indd 28EN24-29_G612[EX_EU]f.indd 28 11/24/04 10:01:38 PM11/24/04 10:01:38 PM
Storing DAB services in memory
Tracing the same programme—
Alternative Reception
You can preset six DAB services (primary) for
each band.
ENGLISH
You can keep listening to the same programme
by activating the Alternative Reception.
1 Perform steps ~ to ⁄ on page 28, to
• While receiving a DAB service:
select a service you want.
When driving in an area where a service
cannot be received, this receiver automatically
tunes in to another ensemble or FM RDS
2 Select the preset number (1 – 6) you
station, broadcasting the same programme.
want to store into.
• While receiving an FM RDS station:
When driving in an area where a DAB service
is broadcasting the same programme as the
FM RDS station is broadcasting, this receiver
automatically tunes in to the DAB service.
When shipped from the factory, Alternative
Reception is activated.
To deactivate the Alternative Reception, see
Preset number flashes for a while.
page 23.
Tuning in to a preset DAB service
To change the display information while
tuning in to an ensemble
1
2
3 Select the preset DAB service
(primary) number (1 – 6) you want.
If the selected primary service has some
secondary services, press the same button
again will tune in to the secondary services.
29
EN24-29_G612[EX_EU]2.indd 29EN24-29_G612[EX_EU]2.indd 29 11/1/04 5:18:43 PM11/1/04 5:18:43 PM
Maintenance
How to clean the connectors
To keep discs clean
Frequent detachment will deteriorate the
A dirty disc may not play correctly.
connectors.
If a disc does become dirty, wipe
To minimize this possibility, periodically wipe
it with a soft cloth in a straight line
ENGLISH
the connectors with a cotton swab or cloth
from center to edge.
moistened with alcohol, being careful not to
• Do not use any solvent (for
damage the connectors.
example, conventional record cleaner, spray,
thinner, benzine, etc.) to clean discs.
To play new discs
New discs may have some rough
spots around the inner and outer
edges. If such a disc is used, this
Connector
receiver may reject the disc.
To remove these rough spots, rub the edges
Moisture condensation
with a pencil or ball-point pen, etc.
Moisture may condense on the lens inside the
CD player in the following cases:
• After starting the heater in the car.
• If it becomes very humid inside the car.
Should this occur, the CD player may
malfunction. In this case, eject the disc and
leave the receiver turned on for a few hours
until the moisture evaporates.
How to handle discs
Center holder
When removing a disc from
its case, press down the center
holder of the case and lift the
disc out, holding it by the
edges.
• Always hold the disc by the edges. Do not
touch its recording surface.
When storing a disc into its case, gently insert
the disc around the center holder (with the
printed surface facing up).
• Make sure to store discs into the cases after
use.
Do not use the following discs:
Sticker
Sticker
Stick-on
Warped
residue
Disc
label
disc
30
EN30-33_G612[EX_EU]1.indd 30EN30-33_G612[EX_EU]1.indd 30 10/26/04 8:58:41 PM10/26/04 8:58:41 PM
More about this receiver
Basic operations
FM RDS operations
• Network-Tracking Reception requires two
Turning on the power
types of RDS signals—PI (Programme
• By pressing SOURCE on the receiver, you
Identification) and AF (Alternative
can also turn on the power.
ENGLISH
Frequency) to work correctly. Without
receiving these data correctly, Network-
Turning off the power
Tracking Reception will not operate.
• If you turn off the power while listening to a
• If a Traffic Announcement is received,
disc, disc play will start from where playback
the volume level (TA VOL) automatically
has been stopped previously, next time you
changes to the preset level.
turn on the power.
• If a DAB tuner is connected and Alternative
Reception for DAB services (DAB AF) is
Selecting the sources
activated, Network-Tracking Reception
(AF-REG) is also activated automatically. On
• When no disc is loaded in the receiver, “CD”
the other hand, Network-Tracking Reception
cannot be selected.
cannot be deactivated without deactivating
• Without connecting to the CD changer or
Alternative Reception. (See page 23.)
DAB tuner, “CD-CH” or “DAB” cannot be
selected.
Disc operations
Tuner operations
General
Storing stations in memory
• This receiver has been designed to reproduce
CDs/CD Texts, and CD-Rs (Recordable)/
• During SSM search...
CD-RWs (Rewritable) in audio CD (CD-DA),
– All previously stored stations are erased and
MP3 and WMA format.
stations are stored newly.
• When a disc has been loaded, selecting “CD”
– Received stations are preset in No. 1 (lowest
for the playback source starts disc play.
frequency) to No. 6 (highest frequency).
– When SSM is over, the station stored in
Inserting a disc
No. 1 will be automatically tuned in.
• When storing a station manually, a previously
• When a disc is inserted upside down,
preset station is erased when a new station is
“PLEASE” and “EJECT” appear alternately
stored in the same preset number.
on the display. Press 0 to eject the disc.
• Do not insert 8 cm discs (single CD) and
unusual shape discs (heart, flower, etc.) into
the loading slot.
Playing a disc
• While fast-forwarding or reversing on an MP3
or WMA disc, you can only hear intermittent
sounds.
To be continued...
31
EN30-33_G612[EX_EU]f.indd 31EN30-33_G612[EX_EU]f.indd 31 11/26/04 9:14:50 AM11/26/04 9:14:50 AM
Playing a CD-R or CD-RW
Playing an MP3/WMA disc
• Use only “finalized” CD-Rs or CD-RWs.
• This receiver can play back MP3/WMA files
• This receiver can play back only the files of
with the extension code <.mp3> or <.wma>
the same type which is first detected if a disc
(regardless of the letter case—upper/lower).
ENGLISH
includes both audio CD (CD-DA) files and
• This receiver can show the names of albums,
MP3/WMA files.
artists (performer), and ID3 Tag (Version 1.0,
• This receiver can play back multi-session
1.1, 2.2, 2.3, or 2.4) for MP3 files and for
discs; however, unclosed sessions will be
WMA files.
skipped while playing.
• This receiver can display only one-byte
• Some CD-Rs or CD-RWs may not play
characters. No other characters can be
back on this receiver because of their disc
correctly displayed.
characteristics, and for the following causes:
• This receiver can play back MP3/WMA files
– Discs are dirty or scratched.
meeting the conditions below:
– Moisture condensation occurs on the lens
– Bit rate: 8 kbps — 320 kbps
inside the receiver.
– Sampling frequency:
– The pickup lens inside the receiver is dirty.
48 kHz, 44.1 kHz, 32 kHz (for MPEG-1)
– CD-R/CD-RW on which the files are
24 kHz, 22.05 kHz, 16 kHz (for MPEG-2)
written with “Packet Write” method.
– Disc format: ISO 9660 Level 1/ Level 2,
– There are improper recording conditions
Romeo, Joliet, Windows long file name
(missing data, etc.) or media conditions
• The maximum number of characters for file/
(stain, scratch, warp, etc.).
folder names vary among the disc format used
• CD-RWs may require a longer readout time
(includes 4 extension characters—<.mp3> or
since the reflectance of CD-RWs is lower
<.wma>).
than that of regular CDs.
– ISO 9660 Level 1: up to 12 characters
• Do not use the following CD-Rs or CD-RWs:
– ISO 9660 Level 2: up to 31 characters
– Discs with stickers, labels, or protective seal
– Romeo*: up to 128 (72) characters
stuck to the surface.
– Joliet*: up to 64 (36) characters
– Discs on which labels can be directly
– Windows long file name*: up to 128 (72)
printed by an ink jet printer.
characters
Using these discs under high temperatures or
* The parenthetic figure is the maximum
high humidities may cause malfunctions or
number of characters for file/folder names
damages to discs.
in case the total number of files and folders
is 313 or more.
32
EN30-33_G612[EX_EU]1.indd 32EN30-33_G612[EX_EU]1.indd 32 10/26/04 8:58:43 PM10/26/04 8:58:43 PM
• This receiver can recognize the total of
Ejecting a disc
512 files, of 200 folders, and of 8 hierarchies.
• If the ejected disc is not removed within
• This receiver can play back the files recorded
15 seconds, the disc is automatically inserted
in VBR (variable bit rate).
again into the loading slot to prevent it from
The files recorded in VBR have a discrepancy
ENGLISH
dust. (Disc will not play this time.)
in elapsed time display, and do not show
the actual elapsed time. Especially, after
General settings—PSM
performing the search function, this difference
becomes noticeable.
• If you change the “AMP GAIN” setting from
• This receiver cannot play back the following
“HIGH PWR” to “LOW PWR” while the
files:
volume level is set higher than “VOL 30,” the
– MP3 files encoded with MP3i and
receiver automatically changes the volume
MP3 PRO format.
level to “VOL 30.”
– MP3 files encoded in an unappropriated
format.
Other main functions (only for
– MP3 files encoded with Layer 1/2.
KD-G612/KD-G611)
– WMA files encoded with lossless,
• If you try to assign a title to a 31st disc,
professional, and voice format.
“NAMEFULL” flashes on the display. Delete
– WMA files which are not based upon
®
unwanted titles before assignment.
Windows Media
Audio.
• Titles assigned to discs in the CD changer can
– WMA files copy-protected with DRM.
also be shown if you playback the disc from
– Files which have the data such as WAVE,
the receiver.
ATRAC3, etc.
• The search function works but search speed is
not constant.
DAB tuner operations
• Only primary DAB services can be presetted
Changing the source
even when you store a secondary service.
• If you change the source, playback also stops
• A previously preset DAB service is erased
(without ejecting the disc).
when a new DAB service is stored in the
Next time you select “CD” for the playback
same preset number.
source, disc play starts from where it has been
stopped previously.
33
EN30-33_G612[EX_EU]f.indd 33EN30-33_G612[EX_EU]f.indd 33 11/24/04 10:01:52 PM11/24/04 10:01:52 PM
Troubleshooting
What appears to be trouble is not always serious. Check the following points before calling a service
center.
ENGLISH
Symptoms Causes Remedies
• Sound cannot be heard
The volume level is set to
Adjust it to the optimum
from the speakers.
the minimum level.
level.
Connections are incorrect. Check the cords and
connections.
General
• The receiver does not
The built-in microcomputer
Reset the receiver (see page
work at all.
may have functioned
2).
incorrectly due to noise, etc.
• SSM automatic presetting
Signals are too weak. Store stations manually.
does not work.
FM/AM
• Static noise while listening
The aerial is not connected
Connect the aerial firmly.
to the radio.
firmly.
• Disc cannot be played
Disc is inserted upside
Insert the disc correctly.
back.
down.
• CD-R/CD-RW cannot be
CD-R/CD-RW is not
• Insert a finalized CD-R/
played back.
finalized.
CD-RW.
• Tracks on the CD-R/
•
Finalize the CD-R/CD-RW
CD-RW cannot be
with the component which
skipped.
you used for recording.
• Disc can be neither played
Disc is locked. Unlock the disc (see page
back nor ejected.
17).
The CD player may have
Eject the disc forcibly (see
functioned incorrectly.
page 2).
Disc playback
• Disc sound is sometimes
You are driving on rough
Stop playback while driving
interrupted.
roads.
on rough roads.
Disc is scratched. Change the disc.
Connections are incorrect. Check the cords and
connections.
• “NO DISC” appears on
Disc is inserted incorrectly. Insert the disc correctly.
the display.
34
EN34-37_G612[EX_EU]1.indd 34EN34-37_G612[EX_EU]1.indd 34 10/26/04 8:58:56 PM10/26/04 8:58:56 PM
Symptoms Causes Remedies
• Disc cannot be played
No MP3/WMA tracks are
Change the disc.
back.
recorded on the disc.
ENGLISH
MP3/WMA tracks do not
Add the extension code
have the extension code
<.mp3> or <.wma> to their
<.mp3> or <.wma> in their
file names.
file names.
MP3/WMA tracks are not
Change the disc.
recorded in the format
(Record MP3/WMA
compliant with ISO 9660
tracks using a compliant
Level 1, Level 2, Romeo, or
application.)
Joliet.
• Noise is generated. The track played back is not
Skip to another track or
an MP3/WMA file (although
change the disc. (Do not add
it has the extension code
the extension code <.mp3>
<.mp3> or <.wma>).
or <.wma> to non-MP3 or
WMA tracks.)
• A longer readout time is
Readout time varies due to
Do not use too many
required (“CHECK” keeps
the complexity of the folder/
hierarchies and folders.
flashing on the display).
file configuration.
MP3/WMA playback
• Tracks cannot be played
Playback order is determined
back as you have intended
when the files are recorded.
them to play.
• Elapsed playing time is
This sometimes occurs
not correct.
during play. This is caused
by how the tracks are
recorded on the disc.
• “NO FILES” appears on
The current disc does not
Insert a disc that contains
the display.
contain any MP3/WMA
MP3/WMA tracks.
tracks.
• Correct characters are
This receiver can only
not displayed (e.g. album
display alphabets (capital:
name).
A – Z), numbers, and a
limited number of symbols.
To be continued...
35
EN34-37_G612[EX_EU]2.indd 35EN34-37_G612[EX_EU]2.indd 35 11/1/04 7:08:35 PM11/1/04 7:08:35 PM
Symptoms Causes Remedies
• “NO DISC” appears on
No disc is in the magazine.
Insert disc into the magazine.
the display.
ENGLISH
Disc is inserted upside down.
Insert disc correctly.
• “NO MAG” appears on
No magazine is loaded in the
Insert the magazine.
the display.
CD changer.
• “RESET 8” appears on the
This receiver is not
Connect this receiver and the
display.
connected to the CD changer
CD changer correctly and
correctly.
press the reset button of the
CD changer
CD changer.
• “RESET 1” – “RESET 7”
Press the reset button of the
appears on the display.
CD changer.
• The CD changer does not
The built-in microcomputer
Reset the receiver (see page
work at all.
may function incorrectly due
2).
to noise, etc.
36
EN34-37_G612[EX_EU]1.indd 36EN34-37_G612[EX_EU]1.indd 36 10/26/04 8:58:57 PM10/26/04 8:58:57 PM
Specifications
AUDIO AMPLIFIER SECTION
CD PLAYER SECTION
Maximum Power Output:
Type: Compact disc player
Front: 50 W per channel
Signal Detection System: Non-contact optical
Rear: 50 W per channel
pickup (semiconductor laser)
Continuous Power Output (RMS):
Number of Channels: 2 channels (stereo)
ENGLISH
Front: 19 W per channel into 4 Ω, 40 Hz
Frequency Response: 5 Hz to 20 000 Hz
to 20 000 Hz at no more than 0.8%
Dynamic Range: 96 dB
total harmonic distortion.
Signal-to-Noise Ratio: 98 dB
Rear: 19 W per channel into 4 Ω, 40 Hz
Wow and Flutter: Less than measurable limit
to 20 000 Hz at no more than 0.8%
MP3 Decoding Format:
total harmonic distortion.
MPEG1/2 Audio Layer 3
Load Impedance: 4 Ω (4 Ω to 8 Ω allowance)
Max. Bit Rate: 320 kbps
®
Tone Control Range:
WMA (Windows Media
Audio) Decoding
Bass: ±10 dB at 100 Hz
Format:
Treble: ±10 dB at 10 kHz
Max. Bit Rate: 192 kbps
Frequency Response: 40 Hz to 20 000 Hz
Signal-to-Noise Ratio: 70 dB
GENERAL
Line-Out Level/Impedance:
Power Requirement:
2.5 V/20 kΩ load (full scale)
Operating Voltage:
Output Impedance: 1 kΩ
DC 14.4 V (11 V to 16 V allowance)
Subwoofer-Out Level/Impedance:
Grounding System: Negative ground
KD-G612/KD-G611:
Allowable Operating Temperature:
2.0 V/20 kΩ load (full scale)
0°C to +40°C
Other Terminals:
Dimensions (W × H × D):
CD changer, SUBWOOFER (only for
Installation Size (approx.):
KD-G612/KD-G611), Steering wheel
182 mm × 52 mm × 150 mm
remote input
Panel Size (approx.):
188 mm × 58 mm × 11 mm
TUNER SECTION
Mass (approx.):
Frequency Range:
1.5 kg (excluding accessories)
FM: 87.5 MHz to 108.0 MHz
AM: (MW) 522 kHz to 1 620 kHz
(LW) 144 kHz to 279 kHz
Design and specifications are subject to change
[FM Tuner]
without notice.
Usable Sensitivity: 11.3 dBf (1.0 µV/75 Ω)
50 dB Quieting Sensitivity:
16.3 dBf (1.8 µV/75 Ω)
Alternate Channel Selectivity (400 kHz): 65 dB
Frequency Response: 40 Hz to 15 000 Hz
Stereo Separation: 35 dB
Capture Ratio: 1.5 dB
[MW Tuner]
Sensitivity: 20 µV
Selectivity: 35 dB
[LW Tuner]
Sensitivity: 50 µV
• Microsoft and Windows Media are either registered trademarks or trademarks of Microsoft
Corporation in the United States and/or other countries.
37
EN34-37_G612[EX_EU]1.indd 37EN34-37_G612[EX_EU]1.indd 37 10/26/04 8:58:57 PM10/26/04 8:58:57 PM
Wir danken Ihnen für den Kauf eines JVC Produkts.
Bitte lesen Sie die Anleitung vollständig durch, bevor Sie das Gerät in Betrieb nehmen, um
sicherzustellen, daß Sie alles vollständig verstehen und die bestmögliche Leistung des Geräts
erhalten.
WICHTIG FÜR LASER-PRODUKTE
1. LASER-PRODUKT DER KLASSE 1
2. ACHTUNG: Die obere Abdeckung nicht öffnen. Das Gerät enthält keine Teile, die vom
Benutzer gewartet werden können. Wartungen nur von qualifziertem Fachpersonal durchführen
lassen.
DEUTSCH
3. ACHTUNG: Sichtbare und unsichtbare Laserstrahlung bei offenem Gerät und Defekt oder
Umgehen der Verriegelung. Setzen Sie sich dem Strahl nicht direkt aus.
4. ANBRINGEN DES ETIKETTS: WARNHINWEIS-ETIKETT, AUSSEN AM GERÄT
ANGEBRACHT.
Warnung:
Wenn Sie den Receiver beim Fahren
Zwangsweises Ausschieben
bedienen müssen, dürfen Sie nicht den Blick
einer Disk
von der Straße nehmen, da sonst die Gefahr
Wenn eine Disk vom Receiver nicht erkannt
von Verkehrsunfällen besteht.
wird oder nicht ausgeschoben kann, können
Sie zwangsweisen Ausschub wie folgt
ausführen.
Zurücksetzen des Geräts
„PLEASE“ und „EJECT“ erscheinen
abwechselnd im Display.
Dadurch wird der Mikrocomputer
zurückgesetzt. Ihre vorgegebenen
Einstellungen werden ebenfalls gelöscht.
• Wenn das nicht funktioniert, führen Sie
einen Reset am Receiver aus.
• Achten Sie darauf, die ausgeschobene Disk
nicht fallen zu lassen.
Aus Sicherheitsgründen wird eine nummerierte ID-Karte mit diesem Receiver mitgeliefert, und die
gleiche ID-Nummer ist auf dem Chassis des Receivers aufgedruckt. Die Karte muss an sicherer
Stelle aufbewahrt werden, da sie den Behörden bei der Identifikation des Receivers im Falle eines
Diebstahls helfen kann.
2
GE02-05_KD-G612[EY]f.indd 2GE02-05_KD-G612[EY]f.indd 2 11/25/04 4:55:33 PM11/25/04 4:55:33 PM
Inhalt
Zurücksetzen des Geräts ........................ 2
Klangeinstellungen ................ 20
Zwangsweises Ausschieben einer
Wählen der vorgegebenen Klangmodi
Disk .................................................... 2
(C-EQ: Spezieller Equalizer) .............. 20
Wie Sie diese Anleitung lesen ............... 4
Einstellen des Klangs ............................. 21
Wie Sie die M MODE-Taste
Allgemeine Einstellungen
verwenden .......................................... 4
— PSM ................................. 22
Bedienfeld
Grundlegendes Verfahren ...................... 22
—
KD-G612/KD-G611/KD-G511
.... 5
Weitere Hauptfunktionen ....... 25
Beschreibung der Teile .......................... 5
Zuweisung von Betitelungen zu den
Fernbedienung — RM-RK50 ..... 6
DEUTSCH
Quellen ............................................... 25
Hauptelemente und Merkmale ............... 6
Abnehmen des Bedienfelds ................... 26
Erste Schritte .......................... 7
Bedienung von externen
Grundlegende Bedienung ...................... 7
Komponenten ...................... 27
Abbrechen der Display-
Abspielen einer externen Tonquelle ....... 27
Demonstrationen ................................ 8
DAB-Tuner-Funktionen ........... 28
Einstellung der Uhr ................................ 8
DAB-Tuner-Empfang ............................ 28
Bedienung des Tuners ............ 9
Speichern von DAB-Diensten ............... 29
Rundfunkempfang ............................... 9
Abstimmen eines vorgewählten DAB-
Speichern von Sendern .......................... 10
Dienstes .............................................. 29
Hören eines Festsenders ........................ 10
Dynamische Programmverfolgung
—Alternativempfang ......................... 29
UKW-RDS-Funktionen ............. 11
Suche nach bevorzugten UKW-RDS-
Wartung ................................ 30
Sendungen ....................................... 11
Weitere Informationen zu
Speichern Ihrer Lieblingsprogramme .... 12
Ihrem Receiver .................... 31
Verwenden des Standbyempfangs ......... 12
Verfolgen des gleichen Programms
Störungssuche ........................ 34
—Network-Tracking-Empfang .......... 13
Technische Daten ................... 37
Bedienung der Disk ................ 14
Abspielen einer Disk im Receiver ......... 14
Abspielen von Disks im CD-Wechsler .... 15
Weitere Hauptfunktionen ...................... 17
Ändern der Displayinformation ............. 18
Der Receiver ist mit Lenkrad-
Auswählen von Wiedergabemodi .......... 19
Fernbedienungsfunktion ausgestattet.
• Siehe Einbau/Anschlußanleitung
(getrennter Band) zum Anschluss.
*Für die Sicherheit....
*Temperatur im Auto....
• Die Lautstärke nicht zu laut stellen, da
Wenn Sie das Auto für lange Zeit in heißem
dadurch Außengeräusche überdeckt und das
oder kaltem Wetter parken, bitte warten, bis
Autofahren gefährlich wird.
sich die Temperatur im Auto sich normalisiert
• Das Auto vor dem Durchführen von
hat, bevor Sie das Gerät einschalten.
komplizierten Bedienschritten anhalten.
3
GE02-05_KD-G612[EY]f.indd 3GE02-05_KD-G612[EY]f.indd 3 11/25/04 4:55:35 PM11/25/04 4:55:35 PM
Wie Sie diese Anleitung lesen
Wie Sie die M MODE-Taste
Die folgenden Methoden werden eingesetzt, um
verwenden
die Erklärungen einfach und leichtverständlich
Wenn Sie M MODE drücken, schaltet der
zu gestalten:
Receiver auf Funktion-Modus, und die
• Einige zugehörige Tipps und Hinweise
Zifferntasten sowie die 5/∞-Tasten arbeiten als
werden unter „Weitere Informationen zu
andere Funktionstasten.
Ihrem Receiver“ gegeben (siehe Seiten 31
– 33).
Beisp.: Wenn die Zifferntaste 2 als
• Tastenfunktionen werden im Wesentlichen
MO (Mono)-Taste fungiert.
mit den folgenden Abbildungen erläutert:
DEUTSCH
Kurz drücken.
Wiederholt drücken.
Zeit-Countdown-Anzeige
Eine davon drücken.
Um diese Tasten wieder für die
ursprünglichen Funktionen zu verwenden,
nachdem M MODE gedrückt wurde, warten
Sie 5 Sekunden, ohne eine dieser Tasten zu
Gedrückt halten,
drücken, bis der Funktion-Modus wieder
bis die gewünschte
aufgehoben ist.
Reaktion beginnt.
• Durch erneutes Drücken von M MODE wird
der Funktion-Modus ebenfalls aufgehoben.
Halten Sie die beide
Tasten gleichzeitig
gedrückt.
Achtung bei der Lautstärkeeinstellung:
Die folgenden Markierungen kennzeichnen...
Disks erzeugen im Vergleich zu anderen
: Bedienungen des eingebauten
Tonträgern sehr wenig Rauschen. Senken
CD-Players.
Sie die Lautstärke vor dem Abspielen einer
Disk, um Beschädigung der Lautsprecher
: Bedienungen des externen
durch plötzliche Tonspitzen zu vermeiden.
CD-Wechslers.
4
GE02-05_KD-G612[EY]f.indd 4GE02-05_KD-G612[EY]f.indd 4 11/25/04 4:55:35 PM11/25/04 4:55:35 PM
Bedienfeld — KD-G612/KD-G611/KD-G511
Beschreibung der Teile
Displayfenster
DEUTSCH
1 5 (höher) / ∞ (niedriger)-Tasten
Displayfenster
2 T/P TP/PTY (Verkehrsprogramm/
a Disk-Information-Anzeigen—TAG (ID3-
Programmtyp)-Taste
Tag),
(Ordner), (Titel/Datei)
3 D DISP (Display)-Taste
s Hauptdisplay
4 S SEL (Wählen)-Taste
d Quellenanzeige / Lautstärkepegelanzeige
5 • Steuerregler
f EQ (Equalizer)-Anzeige
•
(Standby/Ein-Dämpfung)-Taste
g Sound-Modus (C-EQ: Spezieller
6 Displayfenster
Equalizer)-Anzeigen—ROCK, CLASSIC,
7 Fernbedienungssensor
POPS, HIP HOP, JAZZ, USER
• Setzen Sie den Fernbedienungssensor
•
arbeitet auch Zeit-Countdown-
KEINEM intensiven Licht (direkte
Anzeige und als Pegelmesser bei der
Sonneneinstrahlung oder künstliches
Wiedergabe (siehe Seite 23).
Licht) aus.
h Disktyp-Anzeigen—WMA, MP3
8 0 (Auswurf)-Taste
j Tuner-Empfangsanzeigen—ST (Stereo),
9
4/¢ -Tasten
MO (Mono)
p
(Bedienfeld-Freigabe)-Taste
k RDS-Anzeigen—TP, PTY, AF, REG
q SOURCE-Taste
l Wiedergabequelle-Anzeigen—
w BAND-Taste
CH: Leuchtet nur auf, wenn CD-CH als
e Zifferntasten
Wiedergabequelle gewählt ist.
r EQ (Equalizer)-Taste
DISC: Leuchtet für den eingebauten
t MO (Mono)-Taste
CD-Player auf.
y SSM (Sequentieller Speicher für starke
/ Wiedergabemodus / Gegenstand-
Sender)-Taste
Anzeigen—RND (Zufall),
(Disk),
u RPT (Wiederholung)-Taste
(Ordner), RPT (Wiederholung)
i RND (Zufall)-Taste
z LOUD (Loudness)-Anzeige
o M MODE-Taste
x Tr (Titel)-Anzeige
; AUX (Hilfs-) Eingangsbuchse
• Nur für KD-G612/KD-G611.
• NICHT mit digitalen Signalen kompatibel.
5
GE02-05_KD-G612[EY]f.indd 5GE02-05_KD-G612[EY]f.indd 5 11/25/04 4:55:35 PM11/25/04 4:55:35 PM
Fernbedienung — RM-RK50
• RM-RK50 ist für KD-G612/KD-G611
mitgeliefert.
Hauptelemente und Merkmale
•
KD-G511 kann wie hier beschrieben
ferngesteuert werden (mit einer getrennt
erhältlichen Fernbedienung—empfohlen wird
Verwendung von RM-RK50).
Einsetzen der Lithiumknopfbatterie
(CR2025)
DEUTSCH
1 (Standby/Ein/Dämpfung)-Taste
• Zum Ein- und Ausschalten des Geräts und
• Bei der Bedienung richten Sie die
zum Dämpfen des Tons.
Fernbedienung direkt auf den
2 5 U (höher) / D (niedriger) ∞-Tasten
Fernbedienungssensor am Receiver.
Stellen Sie sicher, dass sich kein Hindernis
• 5 U: Ändert die UKW/AM/DAB
dazwischen befindet.
Wellenbereiche.
• D ∞: Ändert die Festsender (oder
Warnung:
Dienste).
• Legen Sie die Batterie an einem Ort ab, wo
• Ändert den Ordner auf den MP3/WMA-
sie außer Reichweite kleiner Kinder ist,
Disks.
um Unfälle zu vermeiden.
• Während eine MP3-Disk auf einem mit
• Um Überhitzen, Bersten oder Entzünden
MP3 kompatiblen CD-Wechsler
der Batterie zu vermeiden:
– Die Batterie nicht aufladen,
abgespielt wird:
kurzschließen oder erhitzen oder in
– Ändert die Disk bei kurzem Drücken.
einem Feuer entsorgen.
– Ändert den Ordner, wenn gedrückt
– Die Batterie nicht zusammen mit
gehalten.
anderen Metallgegenständen ablegen.
3 VOL – / VOL + -Tasten
– Die Batterie nicht mit Pinzetten oder
• Stellt die Lautstärke ein.
ähnlichen Werkzeugen anstoßen.
– Die Batterie mit Klebeband umwickeln
4 SOUND (Ton)-Taste
und isolieren, wenn sie entsorgt oder
• Wählt den Klangmodus (C-EQ: Spezieller
aufbewahrt wird.
Equalizer).
5 SOURCE (Quelle)-Taste
Vorsicht:
• Wählt die Quelle.
6 2 R (Rück) / F (Vorwärts) 3-Tasten
• Sucht nach Sendern (oder Diensten),
wenn kurz gedrückt.
• Sucht nach Ensembles, wenn gedrückt
gehalten.
• Spielt schnell innerhalb des Titels vor
oder zurück, wenn gedrückt gehalten.
• Wechselt die Titel auf der Disk.
6
GE06-11_KD-G612[EY]f.indd 6GE06-11_KD-G612[EY]f.indd 6 11/25/04 4:56:52 PM11/25/04 4:56:52 PM
