JVC KD-G207: SOUND ADJUSTMENTS

1

*

When you adjust the bass, treble, or loudness, the

Adjusting the sound

adjustment you have made is stored for the

currently selected sound mode (C-EQ) including

You can adjust the sound characteristics to your

“USER.”

preference.

2

*

If you are using a two-speaker system, set the fader

ENGLISH

level to “00.”

1

Select the item you want to adjust.

3

*

Normally the control dial works as the volume

Each time you press the

control. So you do not have to select “VOL” to

button, the adjustable items

adjust the volume level.

change as follows:

4

*

Depending on the amplifier gain control setting.

(See page 17 for details.)

2

Adjust the setting.

BAS

TRE

FAD

(bass)

(treble)

(fader)

VOL

LOUD

BAL

To increase the level or

(volume)

(loudness)

(balance)

turn on the loudness

Indication To do: Range

To decrease the level or

1

BAS*

Adjust the bass. –06 (min.)

turn off the loudness

|

+06 (max.)

Indication pattern changes as

1

you adjust the bass or treble.

TRE*

Adjust the treble. –06 (min.)

|

+06 (max.)

2

FAD*

Adjust the front R06 (Rear only)

and rear speaker |

Ex. 1: When you adjust “TRE” (treble)

balance. F06 (Front only)

BAL Adjust the left L06 (Left only)

and right speaker |

balance. R06 (Right only)

1

LOUD*

Boost low and high

Ex. 2: When you turn on the loudness

frequencies to

LOUD ON

produce a well-

|

3

Repeat steps

1

and

2

to adjust the

balanced sound

LOUD OFF

other items.

at low volume

level.

3

VOL*

Adjust the volume. 00 (min.)

To reset each sound mode to the factory

|

settings, repeat the same procedure and

4

30 or 50 (max.)*

reassign the preset values listed in the table on

page 14.

15

EN14-15KD-G207[EE]f.p65 11/6/03, 3:12 PM15