JVC KD-G207: BASIC OPERATIONS

BASIC OPERATIONS

ENGLISH

1

3

2

Turning on the power

4

Adjust the sound as you want.

(See pages 14 and 15.)

1

Turn on the power.

To drop the volume in a moment

Press briefly while listening to any

source. “ATT” starts flashing on the display, and

Note on One-Touch Operation:

the volume level will drop in a moment.

When you select a source in step

2

below, the

To resume the previous volume level, press the

power automatically comes on. You do not have

button briefly again.

to press this button to turn on the power.

• If you turn the control dial, you can also restore

the sound.

2

Select the source.

To turn off the power

Press and hold for more than one

second.

To operate the tuner (FM or AM),

“SEE YOU” appears, then the unit turns off.

see pages 8 – 10.

• If you turn off the power while listening to a

To play a CD,

CD, CD play will start from where playback has

see pages 11 – 13.

been stopped previously, next time you turn on

the power.

3

Adjust the volume.

To increase the volume

CAUTION on Volume Setting:

CDs produce very little noise compared with other

sources. If the volume level is adjusted for the

tuner, for example, the speakers may be damaged

To decrease the volume

by the sudden increase in the output level.

Therefore, lower the volume before playing a CD

Volume level appears.

and adjust it as required during playback.

Volume level indicator

5

EN05-07KD-G207[EE]f.p65 11/6/03, 3:11 PM5

ENGLISH

Canceling the display

3

Select “DEMO OFF.”

demonstration

When shipped from the factory, display

demonstration has been activated, and starts

DEMO OFF

DEMO ON

automatically when no operations are done for

about 20 seconds.

• It is recommended to cancel the display

demonstration before you use the unit for the

first time.

To cancel the display demonstration, follow

the procedure below:

4

Finish the setting.

1

Press and hold SEL (select) for more

than 2 seconds so that one of the

PSM items appears on the display.

(PSM: see page 16.)

To activate the display demonstration, repeat

the same procedure and select “DEMO ON” in

step

3

.

2

Select “DEMO” if not shown on the

display.

6

EN05-07KD-G207[EE]f.p65 11/6/03, 3:11 PM6

ENGLISH

Setting the clock

4

Finish the setting.

1

Press and hold SEL (select) for more

than 2 seconds so that one of the

PSM items appears on the display.

(PSM: see page 16.)

To check the current clock time or change the

display mode

Press DISP (display) repeatedly.

Each time you press the button, the

display changes as follows:

2

Set the hour.

1 Select “CLOCK H” (hour) if not shown on

the display.

• During tuner operation:

2 Adjust the hour.

12

• During CD operation:

ClockElapsed playing time

• During power off:

The power turns on and the clock time is

3

Set the minute.

shown for 5 seconds, then the power turns off.

1 Select “CLOCK M” (minute).

2 Adjust the minute.

12

7

EN05-07KD-G207[EE]f.p65 11/6/03, 3:11 PM7