JVC kd-g162: ! Start searching for your favorite

! Start searching for your favorite

Using the standby receptions

programme.

TA Standby Reception

If there is a station

broadcasting a programme

TA Standby Reception allows the unit to switch

of the same PTY code as you

temporarily to Traffic Announcement (TA)

ENGLISH

have selected, that station is

from any source other than AM.

tuned in.

The volume changes to the preset TA volume

level if the current level is lower than the preset

level (see page 12).

To activate TA Standby Reception

Storing your favorite programme

The TP (Traffic Programme)

types

indicator either lights up or

flashes.

You can store six favorite programme types.

• If the TP indicator lights up, TA Standby

Preset programme types in the number buttons

Reception is activated.

(1 to 6):

• If the TP indicator flashes, TA Standby

Reception is not yet activated. (This occurs

when you are listening to an FM station

without the RDS signals required for TA

1 Select a PTY code (see page 7).

Standby Reception.)

To activate TA Standby Reception, tune in to

2 Select the preset number (1 – 6) you

another station providing these signals. The

want to store into.

TP indicator will stop flashing and remain lit.

To deactivate the TA Standby Reception

The TP indicator goes off.

PTY Standby Reception

Ex.: When “ROCK M” is selected

PTY Standby Reception allows the unit to

switch temporarily to your favorite PTY

3 Repeat steps 1 and 2 to store other

programme from any source other than AM.

PTY codes into other preset numbers.

To activate and select your favorite PTY code

for PTY Standby Reception, see page 12.

4 Finish the procedure.

The PTY indicator either lights up or flashes.

• If the PTY indicator lights up, PTY Standby

Reception is activated.

• If the PTY indicator flashes, PTY Standby

Reception is not yet activated.

To activate PTY Standby Reception, tune in

to another station providing these signals. The

PTY indicator will stop flashing and remain lit.

To deactivate the PTY Standby Reception,

select “OFF” for the PTY code (see page 12).

The PTY indicator goes off.

8

EN06-11_KD-G162_1[EX_EU]f.indd 8EN06-11_KD-G162_1[EX_EU]f.indd 8 10/18/05 4:45:24 PM10/18/05 4:45:24 PM