JVC kd-g162: General settings — PSM

General settings — PSM: JVC kd-g162

General settings — PSM

You can change PSM (Preferred Setting Mode)

3 Adjust the PSM item selected.

items listed in the table below.

ENGLISH

1

2 Select a PSM item.

4 Repeat steps 2 and 3 to adjust other

PSM items if necessary.

5 Finish the procedure.

Indications Selectable settings, [reference page]

DEMO

DEMO ON : [Initial]; Display demonstration will be activated

Display demonstration

automatically if no operation is done for about

20 seconds, [5].

DEMO OFF : Cancels.

CLOCK H

0 – 23 (1 – 12), [5]

Hour adjustment

[Initial: 0 (0:00)]

CLOCK M

00 – 59, [5]

Minute adjustment

[Initial: 00 (0:00)]

24H/12H

12H O 24H, [5]

Time display mode

[Initial: 24H]

CLK ADJ

AUTO : [Initial]; The built-in clock is automatically adjusted

Clock adjustment

using the CT (clock time) data in the RDS signal.

OFF : Cancels.

AF-REG

When the received signals from the current FM RDS station become

Alternative frequency/

weak...

regionalization reception

AF : [Initial]; Switches to another station (the programme

may differ from the one currently received), [9].

The AF indicator lights up.

AF REG : Switches to another station broadcasting the same

programme.

The AF and REG indicators light up.

OFF : Cancels.

To be continued...

11

EN06-11_KD-G162_1[EX_EU]f.indd 11EN06-11_KD-G162_1[EX_EU]f.indd 11 10/18/05 4:45:27 PM10/18/05 4:45:27 PM

Indications Selectable settings, [reference page]

PTY-STBY

Activates PTY Standby Reception with one of the PTY codes, [8].

PTY standby

OFF [Initial]

=

PTY codes, [15]

=

(back to the beginning)

TA VOL

[Initial: VOL 15]; VOL 00 — VOL 30 or 50*, [8]

ENGLISH

Traffic announcement

volume

P-SEARCH

ON : Using the AF data, the unit tunes in to another

Programme search

frequency broadcasting the same programme as the

original preset RDS station is if the preset station

signals are not sufficient.

OFF : [Initial]; Cancels.

TEL

MUTING 1/MUTING 2 : Select either one which mutes the sounds

Telephone muting

while using a cellular phone.

OFF : [Initial]; Cancels.

AMP GAIN

You can change the maximum volume level of this unit.

Amplifier gain control

LOW PWR : VOL 00 – VOL 30 (Select this if the maximum power

of the speaker is less than 45 W to prevent them from

damaging the speaker.)

HIGH PWR : [Initial]; VOL 00 – VOL 50

IF BAND

AUTO : [Initial]; Increase the tuner selectivity to reduce

Intermediate frequency

interference noises between close stations. (Stereo

band

effect may be lost.)

WIDE : Subject to the interference noises from adjacent

stations, but sound quality will not be degraded and

maintains the stereo effect.

*

Depends on the amplifier gain control.

12

EN12-17_KD-G162_1[EX_EU]f.indd 12EN12-17_KD-G162_1[EX_EU]f.indd 12 10/18/05 4:44:41 PM10/18/05 4:44:41 PM