JVC KD-G631: Ÿ Select one of your favorite programme

Ÿ Select one of your favorite programme : JVC KD-G631

3 Repeat steps 1 and 2 to store other PTY

Ÿ Select one of your favorite programme

codes into other preset numbers.

types.

4 Finish the procedure.

or

ENGLISH

Select one of the PTY codes (see

page 10).

Using the standby receptions

TA Standby Reception

TA Standby Reception allows the unit to switch

temporarily to Traffic Announcement (TA) from any

source other than AM.

! Start searching for your favorite

The volume changes to the preset TA volume level if

the

programme.

current level is lower than the preset level (see page 16).

If there is a station broadcasting

a programme of the same PTY

To activate TA Standby Reception

code as you have selected, that

The TP (Traffic Programme) indicator

station is tuned in.

either lights up or flashes.

If the TP indicator lights up, TA Standby Reception is

Storing your favorite programme

activated.

types

If the TP indicator flashes, TA Standby Reception is

not yet activated. (This occurs when you are listening

You can store six favorite programme types.

to an FM station without the RDS signals required for

TA Standby Reception.)

Preset programme types in the number buttons

To activate TA Standby Reception, tune in to another

(1 to 6):

station providing these signals. The TP indicator will

stop flashing and remain lit.

To deactivate the TA Standby Reception

1 Select a PTY code (see above).

The TP indicator goes off.

2 Select the preset number (1 – 6) you want to

store into.

Ex.: When “ROCK M” is selected

Continued on the next page

9

EN06-15_KD-G632_1_003A_pre.indd 9EN06-15_KD-G632_1_003A_pre.indd 9 10/17/06 12:29:49 PM10/17/06 12:29:49 PM

PTY Standby Reception

Automatic station selection—

PTY Standby Reception allows the unit to switch

Programme Search

temporarily to your favorite PTY programme from any

source other than AM.

Usually when you press the number buttons, the preset

station is tuned in.

ENGLISH

To activate and select your favorite PTY code for

If the signals from the FM RDS preset station are not

PTY Standby Reception, see page 16.

sufficient for good reception, this unit, using the AF data,

The PTY indicator either lights up or flashes.

tunes in to another frequency broadcasting the same

If the PTY indicator lights up, PTY Standby Reception

programme as the original preset station is broadcasting.

is activated.

The unit takes some time to tune in to another

If the PTY indicator flashes, PTY Standby Reception is

station using programme search.

not yet activated.

See also page 16.

To activate PTY Standby Reception, tune in to another

station providing these signals. The PTY indicator will

To check the current clock time while

stop flashing and remain lit.

listening to an FM RDS station

To deactivate the PTY Standby Reception, select

Station name (PS) = Station

“OFF” for the PTY code (see page 16). The PTY indicator

Frequency = Programme type

goes off.

(PTY) = Clock = (back to the

beginning)

Tracing the same programme—

Network-Tracking Reception

PTY codes

When driving in an area where FM reception is not

NEWS, AFFAIRS, INFO, SPORT, EDUCATE, DRAMA,

sufficient enough, this unit automatically tunes in to

CULTURE, SCIENCE, VARIED, POP M (music), ROCK M

another FM RDS station of the same network, possibly

(music), EASY M (music), LIGHT M (music), CLASSICS,

broadcasting the same programme with stronger

OTHER M (music), WEATHER, FINANCE, CHILDREN, SOCIAL,

signals (see the illustration below).

RELIGION, PHONE IN, TRAVEL, LEISURE, JAZZ, COUNTRY,

NATION M (music), OLDIES, FOLK M (music), DOCUMENT

When shipped from the factory, Network-Tracking

Reception is activated.

To change the Network-Tracking Reception

setting, see “AF-REG” on page 16.

Programme A broadcasting on different frequency areas

(01 – 05)

10

EN06-15_KD-G632_1_003A_2.indd 10EN06-15_KD-G632_1_003A_2.indd 10 11/3/06 2:59:04 PM11/3/06 2:59:04 PM