Fagor DH-20D: 2. APPLIANCE DESCRIPTION (FIG. 1) 1. TECHNICAL CHARACTERISTICS
2. APPLIANCE DESCRIPTION (FIG. 1) 1. TECHNICAL CHARACTERISTICS: Fagor DH-20D

11
EN
• The electrical safety of the appliance is
only guaranteed if it is connected to an
installation with an earth connection.
• We do not recommend the use of
adaptors, plugs and/or extension leads.
If it is absolutely necessary to use such
elements, use only those which comply
with current safety standards, taking care
not to exceed the power limit indicated
on the adaptor and/or extension lead.
• This appliance is for domestic use only.
Any other use is considered unsuitable
and dangerous.
• In case of breakdown or malfunctioning,
switch off the appliance. Do not attempt
to repair it. If any repairs are necessary,
they must only be made by a Technical
Assistance Service authorised by the
manufacturer. Insist on the use of original
spare parts. Failure to comply with these
points could be a safety hazard.
• The user must not replace the cable. If it
is damaged or needs replacing, this must
only be done by a Technical Assistance
Service authorised by the manufacturer.
Do not use the appliance if the cable or
plug are damaged.
• The manufacturer holds no liability for
any damages arising from unsuitable or
improper use of the appliance or from
repairs carried out by non-qualified
personnel.
IMPORTANT: Never for any reason cover
the appliance during operation as this
could lead to dangerous overheating.
PARTICULARLY:
•
Important:
This appliance must not be
used near baths, showers, sinks, etc.
• Do not install the appliance close to
sources of heat, or in spaces where the
air may contain gases, oil or sulphur, or in
areas exposed to radiation.
• Do not spill any water or flammable
liquids on the appliance.
• Do not handle the appliance with wet
hands.
• Do not switch the appliance on and off by
plugging it in and unplugging it.
• Altering or modifying the appliance’s
functional characteristics could be
dangerous.
•
Before using the appliance for the
first time, read this instruction manual
carefully and keep it for later reference.
• Before using the appliance, ensure that
the domestic mains voltage is the same
as that indicated on the plaque fixed to
the appliance.
• The appliance must be installed in
accordance with the national regulations
for electrical installations.
• On removing the packaging, check the
appliance is in perfect condition. In case
of doubt, contact the nearest authorised
Technical Assistance Service.
• Keep all packaging elements (plastic
bags, polystyrene foam, etc.) out of
the reach of children, as they could be
dangerous.
2. APPLIANCE DESCRIPTION (FIG. 1) 1. TECHNICAL CHARACTERISTICS
1.
Control panel
2.
Air intake grille
3.
Water tank
4.
Air filter (behind the air intake grille)
5.
Handle
6.
Air Outlet grille
7.
Power cord band (Used only when
storing the unit.)
8.
Drain hose outlet
9.
Power Cord
10.
Power Plug
Interference suppression:
The interference
of this appliance has been suppressed in
accordance with interference suppression
standards.
Electromagnetic compatibility:
This
appliance complies with the CEM standards
of electromagnetic compatibility.
Voltage / Frequency :
220V-240V~ 50Hz
Power:
240 W (DH-10D) 600W (DH-20D)
Working temperature:
5ºC ~ 35ºC
Water tank capacity:
1.5 liters (DH-10D) 3 liters (DH-20D)
3. SAFETY WARNINGS
Оглавление
- 4. PANEL DE MANDOS
- 5. FUNCIONAMIENTO 6. EVACUACIÓN DEL AGUA DE CONDENSACIÓN
- 7. MANTENIMIENTO Y LIMPIEZA 8. GUÍA PARA LA SOLUCIÓN DE PROBLEMAS
- 8. INFORMACIÓN PARA LA CORRECTA GESTIÓN DE LOS RESIDUOS DE APARATOS ELÉCTRICOS Y ELECTRÓNICOS
- 2. IDENTIFICAÇÃO DO APARELHO (FIG. 1) 1. CARACTERÍSTICAS TÉCNICAS
- 4. PAINEL DE COMANDOS
- 5. FUNCIONAMENTO 6. EVACUAÇÃO DA ÁGUA DE CONDENSAÇÃO
- 7. MANUTENÇÃO E LIMPEZA 8. GUIA PARA A SOLUÇÃO DE PROBLEMAS
- 9. INFORMAÇÃO PARA A GESTÃO CORRECTA DOS RESÍDUOS DE APARELHOS ELÉCTRICOS E ELECTRÓNICOS
- 2. APPLIANCE DESCRIPTION (FIG. 1) 1. TECHNICAL CHARACTERISTICS
- 4. CONTROL PANEL
- 6. DRAINING OFF THE CONDENSATION WATER
- 9. INFORMATION FOR THE CORRECT DISPOSAL OF ELECTRICAL AND ELECTRONIC APPLIANCES
- 2. IDENTIFICATION DE L’APPAREIL (FIG. 1) 1. CARACTÉRISTIQUES TECHNIQUES
- 4. PANNEAU DE COMMANDES
- 6. ÉVACUATION DE L’EAU DE CONDENSATION
- 8. GUIDE POUR LA SOLUTION DE PROBLÈMES
- 9. INFORMATION POUR LA CORRECTE GESTION DES RÉSIDUS D'APPAREILS ÉLECTRIQUES ET ÉLECTRONIQUES
- 2. ¶ ∂ ƒ π °ƒ ∞ º ∏ ∆∏ ™ ™À™ ∫∂ À ∏ ™. (EIK. 1) 1. ∆∂ á π∫∞ à ∞ ƒ ∞∫∆∏ ƒ π ™ ∆π∫∞
- 4. ÐÁÍÅË ×ÅÉÑÉÓÌÏÕ
- 5. ËÅÉÔÏÕÑÃÉÁ 6. ÁÐÏÓÔÑÁÃÃÉÓÇ ÔÏÕ ÍÅÑÏÕ ÓÕÌÐÕÊÍÙÓÇÓ
- 7. ™À¡ ∆∏ ƒ ∏ ™ ∏ ∫∞π ∫∞ £ ∞ ƒ 𠙪 √ ™ 8. √ ¢ ∏ ° √ ™ ∞ ¡ ∆π ª ∂∆ ø¶ π ™ ∏ ™ ¶ƒ √μ § ∏ ª ∞∆ ø¡
- 9. ÐËÇÑÏÖÏÑÉÅÓ ÃÉÁ ÔÇ ÓÙÓÔÇ ÄÉÁ×ÅÉÑÉÓÇ ÔÙÍ ÁÐÏÂËÇÔÙÍ ÇËÓÊÔÑÉÊÙÍ ÊÁÉ ÇËÅÊÔÑÏÍÉÊÙÍ ÓÕÓÊÅÕÙÍ
- 2. A KÉSZÜLÉK RÉSZEI (1. KÉP) 1. M Ű SZAKI JELLEMZ Ő K
- 4. KEZELÃPANEL
- 5. M Ű KÖDÉS 6. A KONDENZVÍZ ELTÁVOLÍTÁSA
- 7. KARBANTARTÁS ÉS TISZTÍTÁS 8. PROBLÉMAMEGOLDÁSI ÚTMUTATÓ
- 9. ELEKTROMOS ÉS ELEKTRONIKUS KÉSZÜLÉKEK MARADVÁNYAINAK MEGFELEL Ő KEZELÉSÉRE VONATKOZÓ INFORMÁCIÓ
- 2. POPIS VÝROBKU (OBR. 1) 1. TECHNICKÉ ÚDAJE
- 4. KONTROLNÍ PANEL
- 5. CHOD SPOT Ř EBI Č E
- 8. NÁVOD NA Ř EŠENÍ PROBLÉM Ů
- 2. OPIS VÝROBKU (OBR. 1) 1. TECHNICKÉ ÚDAJE
- 4. KONTROLN PANEL
- 5. CHOD SPOTREBI Č A
- 8. NÁVOD NA RIEŠENIE PROBLÉMOV
- 9
- 2. ОПИСАНИЕ ПРИБОРА (РИС. 1) 1. ТЕХНИЧЕСКИЕ ХАРАКТЕРИСТИКИ
- 4. ПАНЕЛЬ УПРАВЛЕНИЯ
- 6. УДАЛЕНИЕ КОНДЕНСИРОВАННОЙ ВОДЫ
- 7. УХОД И ЧИСТКА
- 8. ИНСТРУКЦИИ ДЛЯ РЕШЕНИЯ ВОЗНИКАЮЩИХ ПРОБЛЕМ
- 9. ИНФОРМАЦИЯ О ПРАВИЛЬНОЙ УТИЛИЗАЦИИ ЭЛЕКТРИЧЕСКИХ И ЭЛЕКТРОННЫХ ПРИБОРОВ
- 2. GAILUAREN IDENTIFIKAZIOA (1. IRUD.) 1. EZAUGARRI TEKNIKOAK
- 4. AGINTE PANELA
- 6. KONDENTSAZIO URA KANPORATZEA
- 7. MANTENTZEA ETA GARBITZEA 8. ARAZOAK KONPONTZEKO GIDA
- 9. APARATU ELEKTRIKO ETA ELEKTRONIKOEN HONDAKINEN KUDEAKETA EGOKIRAKO INFORMAZIOA