Beurer MC 4000: Installation location

15

Massage programmes

Relax button

Refresh button

Therapy button

The massage chair features three different automatic massage programmes.

These automatic programmes massage your entire back with a combination of kneading, tapping, rolling and 

Shiatsu massage elements. The air pressure massage can be activated or deactivated separately.

Warning!

•  Keep packaging material away from children!  

There is a choking hazard.

•  Before using the device for the first time, read the 

safety notes in the Safety section. 

w

 Safety, pages 11 to 12

Caution!

•  The massage chair could damage your flooring. 

Place a suitable, non-slip underlay under the 

massage chair.

Installation location

•  Install the massage chair on a sturdy and even 

surface.

•  Before using the device for the first time, remove all 

obstacles in front of and behind the massage chair 

so that the back rest can be lowered and the leg 

rest raised freely.

5.  Initial use

The massage chair MC4000 is delivered in a 

cardboard box. 

Caution!

Do not use sharp or pointed tools (Stanley knife) to 

remove the packaging. 

Unpacking and assembly

Step 1:

>

Open the cardboard box and hold the massage chair at the 

designated holding points.

>

Remove the chair from the cardboard box. 

Four persons are required for this.

>

Carefully remove all the packaging material. 

16

Step 2:

>

Unfold the back rest to the upright position until the locking 

mechanism audibly engages.

The back rest now stands at approx. 115°.

Step 3:

>

Remove the seat cushion.

>

Connect the air hoses under the seat with the air hoses on the 

seat cushion.

>

Affix using the Velcro strips and ensure that the hoses are not 

crossed and or kinked.

>

Carefully position the seat cushion.

Step 4:

>

Affix the back cushion and the neck cushion to the back of the 

back rest at the top.

>

Affix the Velcro fastening before closing the zip.

Step 5:

>

Plug the mains plug into a socket.

>

Switch on the main switch at the bottom of the rear side.

>

Switch on the massage chair at the   on/off button on the 

controls.

The massage chair is now ready for operation.