Beurer BS05: 8. What if there are problems

leather.

Important!

•

Clean the device using only the methods specied.

•

Under no circumstances may liquid enter the device.

•

Do not use any solvent-based cleaning products.

•

Do not use aggressive cleaning products. These can damage the surface.

wFolding mechanism, see above

8. What if there are problems

Problem Cause Solution

Grinding noises during

These noises are normal and

No action is necessary.

operation.

originate from the operating mo-

tor or from the massage rollers

rubbing against the cushion.

The massage cannot

The mains plug is not connected

Plug the mains plug into the socket.

bestarted.

to thesocket.

The massage chair is not swit-

Switch on the massage chair at the main switch.

ched on at the main switch.

The cutout switch for the mas-

In this case, please contact Customer Service.

sage chair has interrupted the

power supply.

Back rest and leg rest can-

Back rest and leg rest are over-

Remove the objects blocking thedevice.

not be raised or lowered.

loaded or blocked.

The massage function

The overheating protection was

Switch o the massage chair and allow to cool

stops when the chair is

triggered.

down for 30 minutes before switching on again.

inoperation.

The maximum operation period

was reached.

Hand switch does not

Hand switch is not congured to

To congure the hand switch, point it towards

work

the massage chair

the bottom half of the back rest. It should be no

more than 40 cm away.

Press the On/O button on the hand switch until

the LED above the relax massage programme

lights up. After approximately 3-4 seconds, LED

4 starts to ash and then switches o. The hand

switch is now congured and ready for use.

9. Technical Data

Product description Massage chair MC3800

Mains voltage/frequency 220-240 V ~ 50/60 Hz

Energy consumption 120 W

Dimensions (in at position) Length 162cm, width 73cm, height 76cm

Weight Net 50,5 kg, with packaging 60,4 kg

Maximum load capacity 150 kg

22