Sony CDX-GT50UI: Specifications
Specifications: Sony CDX-GT50UI
Table of contents
- Table of Contents
- Welcome ! Resetting the unit Preparing the card remote commander
- Setting the clock Attaching the front panel Detaching the front panel
- Location of controls and basic operations Main unit
- wg Number buttons 7
- CD Radio Storing and receiving stations Display items Storing automatically — BTM Storing manually Repeat and shuffle play Receiving the stored stations Tuning automatically
- Setting AF and TA RDS Overview Display items
- Playing back USB devices Selecting PTY Display items Setting CT
- Listening to music on a Mass Storage Class type audio device Playing back iPod Playing tracks Listening to music on “Walkman” (ATRAC Audio Device)
- Repeat and shuffle Play Scan Selecting Album, Artist or Playlist
- Changing the sound settings Adjusting setup items — SET Adjusting the sound characteristics — BAL/FAD/SUB Customizing the equalizer curve — EQ3
- Using optional equipment Auxiliary audio equipment CD/MD changer
- Precautions Notes on discs
- About USB devices Playback order of MP3/WMA/AAC files
- About MP3 files About ATRAC files About WMA files About iPod About AAC files
- Cleaning the connectors Maintenance Replacing the lithium battery of the card remote commander Removing the unit Fuse replacement
- Specifications
- CD/MD playback Troubleshooting General Radio reception
- RDS USB playback Error displays/Messages

2 Remlove the unit.
Power amplifier section
Outputs: Speaker outputs (sure seal connectors)
1 Insert both release keys simultaneously
Speaker impedance: 4 – 8 ohms
until they click.
Maximum power output: 52 W × 4 (at 4 ohms)
General
Hook facing
Output:
inwards.
Audio outputs terminal (sub/rear switchable)
Power antenna (aerial) relay control terminal
Power amplifier control terminal
Inputs:
Telephone ATT control terminal
BUS control input terminal
BUS audio input terminal
2 Pull the release keys to unseat the unit.
Antenna (aerial) input terminal
AUX input jack (stereo mini jack)
iPod signal input terminal (dock connector)
Tone controls:
Low: ±10 dB at 60 Hz (XPLOD)
Mid: ±10 dB at 1 kHz (XPLOD)
High: ±10 dB at 10 kHz (XPLOD)
Power requirements: 12 V DC car battery
(negative ground (earth))
3 Slide the unit out of the mounting.
Dimensions: Approx. 178 × 50 × 179 mm
1
1
(7
/8 × 2 × 7
/8 in) (w/h/d)
Mounting dimensions: Approx. 182 × 53 × 162 mm
1
1
1
(7
/4 × 2
/8 × 6
/2 in) (w/h/d)
Mass: Approx. 1.3 kg (2 lb 14 oz)
Supplied accessories:
USB cap
Card remote commander: RM-X151
Parts for installation and connections (1 set)
Optional accessories/equipment:
Specifications
BUS cable (supplied with an RCA pin cord):
RC-61 (1 m), RC-62 (2 m)
CD Player section
CD changer (10 discs): CDX-757MX
Signal-to-noise ratio: 120 dB
CD changer (6 discs): CDX-T70MX, CDX-T69
Frequency response: 10 – 20,000 Hz
Source selector: XA-C40
Wow and flutter: Below measurable limit
AUX-IN selector: XA-300
Tuner section
Your dealer may not handle some of the above listed
accessories. Please ask the dealer for detailed
FM
information.
Tuning range: 87.5 – 108.0 MHz
Antenna (aerial) terminal:
US and foreign patents licensed from Dolby
External antenna (aerial) connector
Laboratories.
Intermediate frequency: 10.7 MHz/450 kHz
Usable sensitivity: 9 dBf
MPEG Layer-3 audio coding technology and
Selectivity: 75 dB at 400 kHz
patents licensed from Fraunhofer IIS and Thomson.
Signal-to-noise ratio: 67 dB (stereo), 69 dB (mono)
Harmonic distortion at 1 kHz: 0.5 % (stereo),
0.3 % (mono)
Note
Separation: 35 dB at 1 kHz
This unit cannot be connected to a digital preamplifier
Frequency response: 30 – 15,000 Hz
or an equalizer which is Sony BUS system compatible.
MW/LW
Design and specifications are subject to change
Tuning range:
without notice.
MW: 531 – 1,602 kHz
LW: 153 – 279 kHz
Antenna (aerial) terminal:
External antenna (aerial) connector
Intermediate frequency: 10.7 MHz/450 kHz
• Halogenated flame retardants are not used in the
Sensitivity: MW: 30 µV, LW: 40 µV
certain printed wiring boards.
• Halogenated flame retardants are not used in
USB Player section
cabinets.
Interface: USB (Full-speed)
• Paper is used for the packaging cushions.
Maximum current: 500mA
• VOC (Volatile Organic Compound)-free vegetable
oil based ink is used for printing the carton.
19



