JVC KS-F525: TAPE OPERATIONS
TAPE OPERATIONS: JVC KS-F525
TAPE OPERATIONS
KS-FX725R
KS-F525
DISP
ENGLISH
DAB
TP
RDS
PTY
8 9 10 11 127
MO
To stop play and eject the cassette
Listening to a cassette
Press 0.
Tape play stops and the cassette automatically
You can play back type 1 (normal) tapes.
ejects from the cassette compartment. The
source changes to the previously selected one.
1
Insert a cassette into the cassette
If you change the source, tape play also stops
compartment.
(without ejecting the cassette this time).
The unit turns on and tape
• You can also eject the cassette by pressing 0
play starts automatically.
while the unit is turned off.
When one side of the tape
reaches its end during play,
To fast-forward and rewind a tape
the other side of the tape
automatically starts playing
Press ¢ for more than 1
(Auto Reverse).
second to fast-forward the tape.
When the tape reaches its end,
Note on One-Touch Operation:
the tape is reversed and playback
When a cassette is already in the cassette
starts from the beginning of the
compartment, pressing TAPE 23 turns on the
other side.
unit and tape play starts automatically.
Press 4 for more than 1
second to rewind the tape.
2
Select the tape direction.
When the tape reaches its end,
Each time you press
playback of the same side starts.
TAPE 23, the tape direction
changes alternately
forward ( ) and
To stop fast forward or rewind at any position
KS-FX725R
reverse ( ).
on the tape, press TAPE 23 .
Tape play starts from that position on the tape.
Note:
When the tape reaches its end while fast-forwarding, the
tape direction will be changed automatically.
KS-F525
16
EN16-18KS-FX725R_F525[EE]f.pm5 7/12/01, 9:52 AM16
Prohibiting cassette ejection
Finding the beginning of a tune
You can prohibit cassette ejection and can “lock”
a cassette in the cassette compartment.
Multi Music Scan allows you to automatically start
Press and hold TAPE 23 and 0 for more than 2
playback from the beginning of a specified tune.
seconds. “NO EJECT” flashes on the display for
You can specify up to 9 tunes ahead of or before
ENGLISH
about 5 seconds, and the cassette is “locked.”
the current tune.
During playback
Specify how many tunes ahead of or
before the current tune the one you want
is located.
To cancel the prohibition and “unlock” the
Press ¢ to locate a tune
cassette, press and hold TAPE 23 and 0 for
ahead of the current tune on
more than 2 seconds again. “EJECT OK” flashes
the cassette.
for about 5 seconds, and this time the cassette is
“unlocked.”
Press 4 to locate a tune
before the current tune on the
cassette.
Each time you press the buttons, the number
Note:
changes up to ±9.
If you press 0 while cassette ejection is prohibited,
When the beginning of the specified tune is
the cassette will not be ejected.
located, playback starts automatically.
Notes:
• While locating a specified tune:
– If the tape is rewound to its beginning, playback
starts from the beginning of that side.
– If the tape is fast-forwarded to the end, it is
reversed and played from the beginning of the
other side.
• In the following cases, the Multi Music Scan
function may not operate correctly:
– Tapes with tunes having long pianissimo passages
(very quiet parts) or non-recorded portions between
tunes.
– Tapes with short non-recorded sections.
– Tapes with high level of noise or humming between
tunes.
17
EN16-18KS-FX725R_F525[EE]f.pm5 7/12/01, 9:52 AM17
Playing the current tune repeatedly
Other convenient tape functions
You can play the current tune repeatedly (Repeat
Skipping the blank portions on the tape
Play).
You can skip blank portions between the tunes
Press RPT while playing a tune you
ENGLISH
(Blank Skip).
want to hear over again.
When this function is on, the unit skips blank
Each time you press the button,
portions of 15 seconds or more, fast-forwards to
Repeat Play turns on and off
the next tune, then starts playing it.
alternately.
• See also “Changing the general settings (PSM)”
on pages 23 and 24.
Lights up when Repeat Play is turned on.
1
Press and hold SEL (select) for more
than 2 seconds so that one of the
PSM items appears on the display.
(PSM: see page 24.)
When the tune has been played, the tape is
automatically rewound to the beginning of that
tune and the same tune will be played again.
To cancel Repeat Play, press RPT again so that
the RPT indicator goes off.
2
Press ¢ or 4 to select
Note:
“B. SKIP (blank skip).”
In the following cases, Blank Skip and Repeat Play
may not operate correctly:
– Tapes with tunes having long pianissimo passages
(very quiet parts) or non-recorded portions during
tunes.
– Tapes with short non-recorded sections.
– Tapes with high level noise or humming between
3
Turn the control dial clockwise to
tunes.
select “ON.”
– Tapes with tunes recorded at low recording levels.
Now Blank Skip is activated.
4
Press SEL (select) to finish the
setting.
To cancel Blank Skip, repeat the same procedure
and select “OFF” in step 3 by turning the control
dial counterclockwise.
18
EN16-18KS-FX725R_F525[EE]f.pm5 7/12/01, 9:52 AM18
Оглавление
- CONTENTS
- LOCATION OF THE BUTTONS
- LOCATION OF THE BUTTONS
- BASIC OPERATIONS
- RADIO BASIC OPERATIONS
- RDS OPERATIONS
- TAPE OPERATIONS
- SOUND ADJUSTMENTS
- OTHER MAIN FUNCTIONS
- CD CHANGER OPERATIONS
- EXTERNAL COMPONENT OPERATIONS
- DAB TUNER OPERATIONS
- TROUBLESHOOTING
- MAINTENANCE
- SPECIFICATIONS
- СОДЕРЖАНИЕ
- РАСПОЛОЖЕНИЕ КНОПОК
- РАСПОЛОЖЕНИЕ КНОПОК
- ОСНОВНЫЕ ОПЕРАЦИИ
- ОСНОВНЫЕ ОПЕРАЦИИ С РАДИОПРИЕМНИКОМ
- ОПЕРАЦИИ С RDS
- ОПЕРАЦИИ С МАГНИТОФОНОМ
- НАСТРОЙКА ЗВУКА
- ДРУГИЕ ГЛАВНЫЕ ФУНКЦИИ
- ОПЕРАЦИИ С ПРОИГРЫВАТЕЛЕМ- АВТОМАТОМ КОМПАКТ-ДИСКОВ
- ОПЕРАЦИИ С ВНЕШНИМИ КОМПОНЕНТАМИ
- ОПЕРАЦИИ С ТЮНЕРОМ DAB
- ВЫЯВЛЕНИЕ НЕИСПРАВНОСТЕЙ
- ТЕХНИЧЕСКОЕ ОБСЛУЖИВАНИЕ
- ТЕХНИЧЕСКИЕ ХАРАКТЕРИСТИКИ
- Having TROUBLE with operation? Please reset your unit