JVC KD-G437: Ÿ Select one of your favorite programme

Listening to a preset station

Ÿ Select one of your favorite programme

types.

1

ENGLISH

or

2 Select the preset station (1 – 6) you want.

Select one of the PTY codes (see

page 10).

KD-G387: Pressing

5/∞ also can select the preset

station.

To check the current clock time while

listening to an FM (non-RDS) or AM station

! Start searching for your favorite

• For FM RDS stations, see page 10.

programme.

If there is a station broadcasting

Frequency Ô Clock

a programme of the same PTY

code as you have selected, that

station is tuned in.

FM RDS operations

What you can do with RDS

Storing your favorite programme

RDS (Radio Data System) allows FM stations to send an

types

additional signal along with their regular programme

You can store six favorite programme types.

signals.

By receiving the RDS data, this unit can do the

Preset programme types in the number buttons

following:

(1 to 6):

• Programme Type (PTY) Search (see the following)

• TA (Traffic Announcement) and PTY Standby

Receptions (see pages 9 and 15)

• Tracing the same programme automatically

—Network-Tracking Reception (see page 9)

1 Select a PTY code (see above).

• Programme Search (see pages 10 and 15)

2 Select the preset number (1 – 6) you want to

Searching for your favorite

store into.

FM RDS programme

You can tune in to a station broadcasting your favorite

programme by searching for a PTY code.

• To store your favorite programme types, see the

following.

Ex.: When “ROCK M” is selected

~ The last selected PTY code

appears.

8

EN06-13_KD-G437_001A_pre.indd 8EN06-13_KD-G437_001A_pre.indd 8 9/22/06 5:21:25 PM9/22/06 5:21:25 PM

To activate and select your favorite PTY code for

3 Repeat steps 1 and 2 to store other PTY

PTY Standby Reception, see page 15.

codes into other preset numbers.

The PTY indicator either lights up or flashes.

• If the PTY indicator lights up, PTY Standby Reception

4 Finish the procedure.

is activated.

• If the PTY indicator flashes, PTY Standby Reception is

ENGLISH

not yet activated.

To activate PTY Standby Reception, tune in to another

station providing these signals. The PTY indicator will

stop flashing and remain lit.

Using the standby receptions

TA Standby Reception

To deactivate the PTY Standby Reception, select

“OFF” for the PTY code (see page 15). The PTY indicator

TA Standby Reception allows the unit to switch

goes off.

temporarily to Traffic Announcement (TA) from any

source other than AM.

The volume changes to the preset TA volume level if

the

current level is lower than the preset level (see page 15).

Tracing the same programme—

To activate TA Standby Reception

Network-Tracking Reception

The TP (Traffic Programme) indicator

When driving in an area where FM reception is not

either lights up or flashes.

sufficient enough, this unit automatically tunes in to

another FM RDS station of the same network, possibly

• If the TP indicator lights up, TA Standby Reception is

broadcasting the same programme with stronger

activated.

signals (see the illustration below).

• If the TP indicator flashes, TA Standby Reception is

not yet activated. (This occurs when you are listening

When shipped from the factory, Network-Tracking

to an FM station without the RDS signals required for

Reception is activated.

TA Standby Reception.)

To change the Network-Tracking Reception

To activate TA Standby Reception, tune in to another

setting, see “AF-REG” on page 14.

station providing these signals. The TP indicator will

stop flashing and remain lit.

Programme A broadcasting on different frequency areas

(01 – 05)

To deactivate the TA Standby Reception

The TP indicator goes off.

PTY Standby Reception

PTY Standby Reception allows the unit to switch

temporarily to your favorite PTY programme from any

source other than AM.

9

EN06-13_KD-G437_001A_pre.indd 9EN06-13_KD-G437_001A_pre.indd 9 9/22/06 5:21:26 PM9/22/06 5:21:26 PM