JVC KD-G427: ! Start searching for your favorite

! Start searching for your favorite

Using the standby receptions

programme.

TA Standby Reception

TA Standby Reception allows the unit to switch

temporarily to Traffic Announcement (TA)

from any source other than AM.

ENGLISH

The volume changes to the preset TA volume

level if the current level is lower than the preset

level (see page 15).

To activate TA Standby Reception

If there is a station broadcasting a

The TP (Traffic Programme)

programme of the same PTY code as you

indicator either lights up or

have selected, that station is tuned in.

flashes.

Storing your favorite programme

• If the TP indicator lights up, TA Standby

Reception is activated.

types

• If the TP indicator flashes, TA Standby

You can store six favorite programme types.

Reception is not yet activated. (This occurs

when you are listening to an FM station

Preset programme types in the number buttons

without the RDS signals required for TA

(1 to 6):

Standby Reception.)

To activate TA Standby Reception, tune in to

another station providing these signals. The

TP indicator will stop flashing and remain lit.

1 Select a PTY code (see page 8).

To deactivate the TA Standby Reception

The TP indicator goes off.

2 Select the preset number (1 – 6) you

want to store into.

PTY Standby Reception

PTY Standby Reception allows the unit to

switch temporarily to your favorite PTY

programme from any source other than AM.

To activate and select your favorite PTY code

for PTY Standby Reception, see page 15.

The PTY indicator either lights up or flashes.

• If the PTY indicator lights up, PTY Standby

Ex.: When “ROCK M” is selected

Reception is activated.

3 Repeat steps 1 and 2 to store other

• If the PTY indicator flashes, PTY Standby

PTY codes into other preset numbers.

Reception is not yet activated.

To activate PTY Standby Reception, tune in

to another station providing these signals. The

4 Finish the procedure.

PTY indicator will stop flashing and remain

lit.

To deactivate the PTY Standby Reception,

select “OFF” for the PTY code (see page 15).

The PTY indicator goes off.

9

EN06-11KD-G427[EE]f.indd 9EN06-11KD-G427[EE]f.indd 9 11/22/05 5:52:48 PM11/22/05 5:52:48 PM