JVC KD-G727: More about this unit
More about this unit: JVC KD-G727
• While receiving an FM RDS station:
Storing DAB services in memory
When driving in an area where a DAB service
is broadcasting the same programme as the
You can preset six DAB services (primary) for
FM RDS station is broadcasting, this unit
each band.
automatically tunes in to the DAB service.
When shipped from the factory, Alternative
1 Select a service you want (see page 21).
ENGLISH
Frequency Reception is activated.
To deactivate the Alternative Frequency
2 Select the preset number (1 – 6) you
Reception, see page 17.
want to store into.
To change the display information while
tuning to an ensemble
Preset number flashes for a while.
Service name = Ensemble name = Channel
number = Frequency = Clock = (back to the
beginning)
More about this unit
Tuning in to a preset DAB service
1
Basic operations
Turning on the power
• By pressing SRC on the unit, you can also
turn on the power. If the source is ready,
2 Select the preset DAB service
playback also starts.
(primary) number (1 – 6) you want.
Turning off the power
• If you turn off the power while listening to a
disc, disc play will start from where playback
If the selected primary service has some
has been stopped previously, next time you
secondary services, pressing the same
turn on the power.
button again will tune in to the secondary
services.
Tuner operations
Storing stations in memory
Tracing the same programme—
• During SSM search...
Alternative Frequency Reception
– All previously stored stations are erased and
stations are stored newly.
You can keep listening to the same programme
– Received stations are preset in No. 1 (lowest
by activating the Alternative Frequency
Reception.
frequency) to No. 6 (highest frequency).
• While receiving a DAB service:
– When SSM is over, the station stored in
When driving in an area where a service
No. 1 will be automatically tuned in.
cannot be received, this unit automatically
• When storing a station manually, the
tunes in to another ensemble or FM RDS
previously preset station is erased when a new
station, broadcasting the same programme.
station is stored in the same preset number.
22
EN18-23_KD-G727_001A_1.indd 22EN18-23_KD-G727_001A_1.indd 22 12/2/05 2:56:54 PM12/2/05 2:56:54 PM
FM RDS operations
Playing a CD-R or CD-RW
• Network-Tracking Reception requires
• Use only “finalized” CD-Rs or CD-RWs.
two types of RDS signals—PI (Programme
• This unit can play back only files of the same
Identification) and AF (Alternative
type which are first detected if a disc includes
Frequency) to work correctly. Without
both audio CD (CD-DA) files and MP3/
receiving these data correctly, Network-
WMA files.
ENGLISH
Tracking Reception will not operate correctly.
• This unit can play back multi-session discs;
• If a Traffic Announcement is received by
however, unclosed sessions will be skipped
TA Standby Reception, the volume level
while playing.
automatically changes to the preset level (TA
• Some CD-Rs or CD-RWs may not play
VOL) if the current level is lower than the
back on this unit because of their disc
preset level.
characteristics, or for the following reasons:
• When Alternative Frequency Reception
– Discs are dirty or scratched.
is activated (with AF selected), Network-
– Moisture condensation occurs on the lens
Tracking Reception is also activated
inside the unit.
automatically. On the other hand, Network-
– The pickup lens inside the unit is dirty.
Tracking Reception cannot be deactivated
– CD-R/CD-RW on which the files are
without deactivating Alternative Frequency
written with “Packet Write” method.
Reception. (See page 16.)
– There are improper recording conditions
• If you want to know more about RDS, visit
(missing data, etc.) or media conditions
«http://www.rds.org.uk».
(stained, scratched, warped, etc.).
• CD-RWs may require a longer readout time
since the reflectance of CD-RWs is lower than
Disc operations
that of regular CDs.
Caution for DualDisc playback
• Do not use the following CD-Rs or CD-RWs:
• The Non-DVD side of a “DualDisc” does
– Discs with stickers, labels, or a protective
not comply with the “Compact Disc Digital
seal stuck to the surface.
Audio” standard. Therefore, the use of Non-
– Discs on which labels can be directly
DVD side of a DualDisc on this product may
printed by an ink jet printer.
not be recommended.
Using these discs under high temperatures or
high humidities may cause malfunctions or
General
damage to the unit.
• This unit has been designed to reproduce
Playing an MP3/WMA disc
CDs/CD Texts, and CD-Rs (Recordable)/
CD-RWs (Rewritable) in audio CD (CD-DA),
• This unit can play back MP3/WMA files
MP3, and WMA formats.
with the extension code <.mp3> or <.wma>
(regardless of the letter case—upper/lower).
Inserting a disc
• This unit can show the names of albums,
• When a disc is inserted upside down,
artists (performer), and Tag (Version 1.0, 1.1,
“PLEASE” and “EJECT” appear alternately on
2.2, 2.3, or 2.4) for MP3 files and for WMA
the display. Press 0 to eject the disc.
files.
• Do not insert 8 cm discs (single CD) and
• This unit can display only one-byte
unusual shape discs (heart, flower, etc.) into
characters. No other characters can be
the loading slot.
correctly displayed.
Playing a disc
• While fast-forwarding or reversing on an MP3
or WMA disc, you can only hear intermittent
sounds.
Continued on the next page
23
EN18-23_KD-G727_001A_1.indd 23EN18-23_KD-G727_001A_1.indd 23 11/28/05 6:44:27 PM11/28/05 6:44:27 PM
• This unit can play back MP3/WMA files
Playing MP3/WMA tracks from a USB memory
meeting the conditions below:
• While playing from a USB memory, the
– Bit rate: 8 kbps — 320 kbps
playback order may differ from other players.
– Sampling frequency:
• This unit may be unable to play back some
48 kHz, 44.1 kHz, 32 kHz (for MPEG-1)
USB memories due to their characteristics or
24 kHz, 22.05 kHz, 16 kHz (for MPEG-2)
recording conditions.
ENGLISH
– Disc format: ISO 9660 Level 1/Level 2,
• Depending on the shape of the USB memories
Romeo, Joliet, Windows long file name
and connection ports, some USB memories
may not be attached properly or the
• The maximum number of characters for file/
connection might be loose.
folder names vary among the disc format used
• It is not recommended to use a USB memory
(includes 4 extension characters—<.mp3> or
wider than 20 mm as it will block you from
<.wma>).
pressing the 0 button.
– ISO 9660 Level 1: up to 12 characters
• If the connected USB memory does not have
– ISO 9660 Level 2: up to 31 characters
the correct files, “NO FILES” appears and the
– Romeo*: up to 128 (72) characters
unit returns to the previous source.
– Joliet*: up to 64 (36) characters
• This unit can show Tag (Version 1.0, 1.1, 2.2,
– Windows long file name*: up to 128 (72)
2.3, or 2.4) for MP3 files and for WMA files.
characters
• This unit can play back MP3/WMA files
* The parenthetic figure is the maximum
meeting the conditions below:
– Bit rate:
number of characters for file/folder names in
MP3: 32 kbps — 320 kbps (MPEG-1)
case the total number of files and folders is
8 kbps — 160 kbps (MPEG-2/2.5)
313 or more.
WMA: 5 kbps — 320 kbps
• This unit can play back files recorded in VBR
– Sampling frequency:
(variable bit rate).
MP3: 48 kHz, 44.1 kHz, 32 kHz (MPEG-1)
Files recorded in VBR have a discrepancy
24 kHz, 22.05 kHz, 16 kHz (MPEG-2)
in elapsed time display, and do not show
12 kHz, 11.025 kHz, 8 kHz (MPEG-2.5)
the actual elapsed time. Especially, after
WMA: 8 kHz — 48 kHz
performing the search function, this
• This unit can play back MP3 files recorded in
difference becomes noticeable.
VBR (variable bit rate).
• This unit can recognize a total of 512 files, of
• The maximum number of characters for
folder and file names is 25 characters; 128
200 folders, and of 8 hierarchies.
characters for MP3/WMA tag information.
• This unit cannot play back the following files:
• This unit can recognize a total of 2 500 files
– MP3 files encoded with MP3i and
and 250 folders (999 files per folder).
MP3 PRO format.
• This unit cannot play back the following files:
– MP3 files encoded in an inappropriate
– MP3 files encoded with MP3i and
format.
MP3 PRO format.
– MP3 files encoded with Layer 1/2.
– MP3 files encoded in an inappropriate
– WMA files encoded with lossless,
format.
professional, and voice format.
– MP3 files encoded with Layer 1/2.
– WMA files which are not based upon
Changing the source
Windows Media
Audio.
®
• If you change the source, playback also stops.
– WMA files copy-protected with DRM.
Next time you select the same source again,
– Files which have the data such as WAVE,
playback starts from where it has been
ATRAC3, etc.
stopped previously.
• The search function works but search speed is
not constant.
Ejecting a disc
• If the ejected disc is not removed within
15 seconds, the disc is automatically inserted
again into the loading slot to protect it from
dust. (Disc will not play this time.)
24
EN24-29_KD-G727_001A_f.indd 24EN24-29_KD-G727_001A_f.indd 24 12/19/05 6:50:35 PM12/19/05 6:50:35 PM
Оглавление
- CONTENTS
- Control panel
- Remote controller — RM-RK50
- Getting started
- Radio operations
- FM RDS operations
- ! Start searching for your favorite
- Disc/USB memory
- ~
- Sound adjustments
- General settings — PSM
- Title assignment
- ~
- Other external component
- ~
- More about this unit
- Maintenance
- Troubleshooting
- Specifications
- CОДЕРЖАНИЕ
- Панель управления
- Пульт дистанционного управления — RM-RK50
- Начало работы
- Операции с
- Операции с FM RDS
- ! Запустите поиск любимой
- Операции с дисками или
- ~
- Настройки звучания
- Общие настройки — PSM
- Присвоения названия
- ~
- Другие операции с внешним устройством
- ~
- Дополнительная информация о приемнике
- Обслуживание
- Устранение проблем
- Технические характеристики
- Please reset your unit