Sony TDM-MP10: Precautions On safety On placement On heat buildup
Precautions On safety On placement On heat buildup: Sony TDM-MP10
Table of contents
- WARNING
- Compatible Sony Ericsson mobile phones
- Table of Contents
- Overview
- 1: Checking supplied items 2: List of parts locations
- 3: Installing the TDM-MP10 To connect/disconnect the unit
- To adjust the unit’s To put the mobile phone connector position into the unit’s connector
- Controlling the mobile phone Performing basic operations
- Additional Information Troubleshooting
- Precautions On safety On placement On heat buildup
- Cleaning the unit Specifications General
The sound is distorted.
• Reduce the volume of the
Precautions
connected AV system.
• Set the equalizer setting of the
On safety
mobile phone to OFF.
Should any solid object or liquid
fall into the system, unplug the
* See “Compatible Sony Ericsson
system and have it checked by
mobile phones” (page 3).
qualified personnel before
operating it any further.
On placement
• Do not place the unit in an
inclined position.
• Do not place the unit in
locations where it is;
– Extremely hot or cold
– Dusty or dirty
– Very humid
– Subject to vibrations
– Subject to direct sunlight.
• Use caution when placing the
unit on surfaces that have been
specially treated (with wax, oil,
polish, etc.) as staining or
discoloration of the surface may
result.
On heat buildup
• Although the unit heats up
during operation, this is not a
malfunction.
• Place the unit in a location with
adequate ventilation to prevent
heat buildup in the unit.
If you have any questions or
problems concerning your unit,
please consult your nearest Sony
dealer.
GB
12
