Sony CPD-E200E: Self-diagnosis function Specifications

D:\###sagyou\0622-yama\386765711CPDE200EAEP\01GB03BAS-AEP.fm

masterpage:Left

01GB01COV-AEP.book Page 16 Monday, June 21, 1999 7:09 PM

Self-diagnosis function

Specifications

This monitor is equipped with a self-diagnosis function. If there is

a problem with your monitor or computer, the screen will go

CRT 0.24 mm aperture grille pitch (center)

blank and the

1

(power) indicator will either light up green or

17 inches measured diagonally

flash orange. If the

1

(power) indicator is lit in orange, the

90-degree deflection

computer is in power saving mode. Try pressing any key on the

FD Trinitron

keyboard.

Viewable image size Approx. 327

×

243 mm (w/h)

7

5

(12

/

8

×

9

/

8

inches)

16.0" viewing image

Resolution

MENU

RESET

Maximum Horizontal: 1600 dots

Vertical: 1200 lines

Recommended Horizontal: 1024 dots

1

(power) indicator

Vertical: 768 lines

Standard image area Approx. 312

×

234 mm (w/h)

3

1

(12

/

8

×

9

/

4

inches)

If the

1

(power) indicator is green

Deflection frequency* Horizontal: 30 to 85 kHz

Vertical: 48 to 120 Hz

1

Disconnect the video input cable or turn off the

AC input voltage/current 100 to 240 V, 50 – 60 Hz, Max. 1.7 A

connected computer.

Power consumption 120 W

Dimensions

Approx. 404

×

413.5

×

419.5 mm

2

Press the

1

(power) button twice to turn the monitor

3

5

(w/h/d)

(16

×

16

/

8

×

16

/

8

inches)

off and then on.

Mass Approx. 20 kg (44 lb 1 oz)

Plug and Play DDC1/DDC2B/DDC2Bi

3

Move the control button

,

for 2 seconds before the

Supplied accessories See page 6

monitor enters power saving mode.

MENU

* Recommended horizontal and vertical timing condition

• Horizontal sync width should be more than 1.0 µsec.

• Horizontal blanking width should be more than 3.0 µsec.

• Vertical blanking width should be more than 500 µsec.

Design and specifications are subject to change without notice.

If all four color bars appear (white, red, green, blue), the monitor

is working properly. Reconnect the video input cable and check

the condition of your computer.

If the color bars do not appear, there is a potential monitor failure.

Inform your authorized Sony dealer of the monitor’s condition.

If the

1

(power) indicator is flashing orange

Press the

1

(power) button twice to turn the monitor off

and then on.

If the

1

(power) indicator lights up green, the monitor is working

properly.

If the

1

(power) indicator is still flashing, there is a potential

monitor failure. Count the number of seconds between orange

flashes of the

1

(power) indicator and inform your authorized

Sony dealer of the monitor’s condition. Be sure to note the model

name and serial number of your monitor. Also note the make and

model of your computer and video board.

16

3-867-657-11 (1)

CPD-E200E