Sony CPD-E200E: Helpful hints and information Resetting the adjustments

D:\###sagyou\0622-yama\386765711CPDE200EAEP\01GB03BAS-AEP.fm

masterpage:Left

OUT OF FOCUS

Helpful hints and information

The picture may seem to be out of focus when the red and blue

(HELP)

color signals are not aligned properly, causing red or blue

shadows to appear around letters and lines. Try adjusting the

The HELP menu contains helpful hints and information about this

picture’s convergence to make the shadows disappear. Move the

monitor. If your monitor is displaying symptoms that match those

control button

,

to jump directly to the CONVERGENCE

listed in the HELP menu, follow the on-screen instructions to

menu. When the CONVERGNECE menu is displayed, the

resolve the problem. If the symptoms do not match those listed in

contrast, brightness and moire adjustment settings are

the HELP menu or if the problem persists, see “Trouble

automatically reset for all input signals.

symptoms and remedies” on page 14.

DISCOLORATION

1

Press the center of the control button.

If the picture’s color appears abnormal in certain areas of the

The main MENU appears on the screen.

screen, first check for any loose signal cables. After you have

checked the cables, try degaussing (demagnetizing) the screen

2

Move the control button to highlight HELP and

manually. Move the control button

,

to jump directly to the

press the center of the control button again.

OPTION menu, then select (DEGAUSS).

The following HELP menu appears on the screen.

HELP

Resetting the adjustments

RETURN TO MA I N MENU

RECOMMENDED RESOLUT ION

FLICKER

This monitor has the following three reset methods. Use the

TH I N HOR I ZONTAL L I NE

DISTORTED SHAPE

RESET button to reset the adjustments.

OUT OF FOCUS

DI SCOLORAT ION

3

Move the control button

m

/

M

to select a HELP menu

item and press the center of the control button

again.

Instructions or information to resolve the problem appears on

the screen. An explanation of each menu item is given below.

Resetting a single adjustment item

Use the control button to select the adjustment item you want to

RECOMMENDED RESOLUTION

reset, and press the RESET button.

If the picture does not fill the screen to the edges or if the picture

appears too large for the screen, adjust the resolution to the figures

shown in the menu using your computer. If the input signal

Resetting all of the adjustment data for the

matches one of this monitor’s factory preset modes, the resolution

current input signal

and refresh rate of the current input signal are displayed.

Press the RESET button when no menu is displayed on the screen.

RECOMMENDED RESOLUT ION

Note that the following items are not reset by this method:

SET RESOLUT ION TO

• on-screen menu language (page 7)

1024X768 AT 85Hz USING PC.

CURRENT SETT I NG I S

• on-screen menu position (page 11)

1280X1024 AT 75Hz.

• control lock (page 11)

FLICKER

Resetting all of the adjustment data for all input

If the picture is flickering, adjust the refresh rate to figures shown

signals

in the menu. If the input signal matches one of this monitor’s

Press and hold the RESET button for more than two seconds.

factory preset modes, the refresh rate of the current input signal is

displayed.

Note

FLICKER

The RESET button does not function when

(CONTROL LOCK)

SET REFRESH RATE TO

is set to ON.

75Hz OR 85Hz USING PC.

CURRENT SETT I NG I S 60Hz .

THIN HORIZONTAL LINE

The lines that appear on your screen are damper wires. See

page 13 for more information about the damper wires.

DISTORTED SHAPE

If the shape of the picture on the screen seems distorted, try

adjusting the picture’s geometry. Move the control button

,

to

jump directly to the GEOMETRY menu.

12

3-867-657-11 (1)

CPD-E200E

01GB01COV-AEP.book Page 12 Monday, June 21, 1999 7:09 PM