Yamaha NS-SW210: CONNECTIONS ADJUSTING THE SUBWOOFER BEFORE USE

CONNECTIONS ADJUSTING THE SUBWOOFER BEFORE USE: Yamaha NS-SW210

CONNECTIONS

ADJUSTING THE

SUBWOOFER BEFORE USE

Caution: Unplug the subwoofer and other

audio/video components before making

Before using the subwoofer, adjust the subwoofer to obtain

connections.

the optimum volume balance between the subwoofer and

the front speakers by following the procedure described

Connecting to line output (pin jack)

below.

terminals of the amplifier

To connect to an amplifier (or AV receiver), connect the

SUBWOOFER terminal on the rear of the amplifier (or AV

receiver) to the INPUT terminal of the subwoofer.

Amplifier (The rear panel of various

1 Set the VOLUME control to minimum (0).

amplifiers may differ in appearance.)

2 Turn on the power of all the other components.

3 Make sure that the POWER switch is set to the ON

position.

* The Power indicator lights up in green.

4 Play a source containing low-frequency components

and adjust the amplifier’s volume control to the desired

listening level.

5 Increase the volume gradually to adjust the volume

balance between the subwoofer and the front speakers.

To enjoy natural bass sound, keep the subwoofer

volume at a level where it is barely distinguishable

from other speakers.

6 Adjust the volume of the entire sound system using the

amplifier's volume control.

Note

It is recommended to set the VOLUME control about in

the middle position when using in a multi channel home

theater system.

Plug in the subwoofer to the AC outlet

After all connections are completed, plug the subwoofer

Frequency characteristic

and other audio/video components into AC outlets.

This subwoofer’s frequency characteristic

100 dB

90

80

70

60

50

English

40

20 50 100 200 500 Hz

To AC outlet

* This diagram does not depict actual frequency response

characteristics.

3 En

Оглавление