Dell Inspiron 14z N411z: Wireless Mini-Card

10

Wireless Mini-Card

WARNING: Before working inside your computer, read the safety information

that shipped with your computer. For additional safety best practices information,

see the Regulatory Compliance Homepage at dell.com/regulatory_compliance.

CAUTION: Only a certified service technician should perform repairs on your

computer. Damage due to servicing that is not authorized by Dell is not covered by

your warranty.

CAUTION: To avoid electrostatic discharge, ground yourself by using a wrist

grounding strap or by periodically touching an unpainted metal surface, such as a

connector on your computer.

CAUTION: To help prevent damage to the system board, remove the main battery

(see "Removing the Battery" on page 13) before working inside the computer.

CAUTION: When the mini-card is not in the computer, store it in protective

antistatic packaging. See "Protecting Against Electrostatic Discharge" in the

safety instructions that shipped with your computer.

NOTE: Dell does not guarantee compatibility or provide support for mini-cards from

sources other than Dell.

Your computer has one half mini-card slot that supports a Wi-Fi+WiMax or

Wi-Fi+Bluetooth combo card.

NOTE: If you ordered a wireless mini-card with your computer, the card is already

installed.

Removing the Mini-Card

1

Follow the instructions in "Before You Begin" on page 9.

2

Remove the battery. See "Removing the Battery" on page 13.

3

Remove the module cover. See "Removing the Module Cover" on page 15.

4

Follow the instructions from step 4 to step 5 in "Removing the Optical

Drive" on page 23.

5

Remove the keyboard. See "Removing the Keyboard" on page 31.

Wireless Mini-Card 41