Dell Inspiron 14z N411z: Module Cover
Module Cover: Dell Inspiron 14z N411z

3
Module Cover
WARNING: Before working inside your computer, read the safety information
that shipped with your computer. For additional safety best practices information,
see the Regulatory Compliance Homepage at dell.com/regulatory_compliance.
CAUTION: Only a certified service technician should perform repairs on your
computer. Damage due to servicing that is not authorized by Dell is not covered by
your warranty.
CAUTION: To avoid electrostatic discharge, ground yourself by using a wrist
grounding strap or by periodically touching an unpainted metal surface (such as a
connector on your computer).
Removing the Module Cover
1
Follow the instructions in "Before You Begin" on page 9.
2
Remove the battery. See "Removing the Battery" on page 13.
3
Loosen the captive screw that secures the module cover to the computer
base.
4
Use your fingertips to release the tabs on the module cover from the slots
on the computer base.
5
Lift the module cover off the computer base.
Module Cover 15

1 module cover 2 captive screw
3 tabs 4 computer base
Replacing the Module Cover
1
Follow the instructions in "Before You Begin" on page 9.
2
Align the tabs on the module cover with the slots on the computer base
and snap the module cover into place.
3
Tighten the captive screw that secures the module cover to the computer
base.
4
Replace the battery. See "Replacing the Battery" on page 14.
16 Module Cover
1
2
3
4
Оглавление
- Contents
- Before You Begin
- Battery
- Module Cover
- Coin-Cell Battery
- Hard-Drive Assembly
- Optical Drive
- Memory Module(s)
- Keyboard
- Palm-Rest Assembly
- Wireless Mini-Card
- Display
- DC-in Connector Assembly
- USB Board
- Camera Module
- Thermal Fan
- System Board
- Heat-Sink Assembly
- Media-Card Reader Board
- Speakers
- System Setup
- Flashing the BIOS