Dell Inspiron 14z N411z: Camera Module

14

Camera Module

WARNING: Before working inside your computer, read the safety information

that shipped with your computer. For additional safety best practices information,

see the Regulatory Compliance Homepage at dell.com/regulatory_compliance.

CAUTION: Only a certified service technician should perform repairs on your

computer. Damage due to servicing that is not authorized by Dell is not covered by

your warranty.

CAUTION: To avoid electrostatic discharge, ground yourself by using a wrist

grounding strap or by periodically touching an unpainted metal surface (such as a

connector on your computer).

CAUTION: To help prevent damage to the system board, remove the main battery

(see "Removing the Battery" on page 13) before working inside the computer.

Removing the Camera Module

1

Follow the instructions in "Before You Begin" on page 9.

2

Remove the battery. See "Removing the Battery" on page 13.

3

Remove the module cover. See "Removing the Module Cover" on page 15.

4

Follow the instructions in step 4 to step 5 of "Removing the Optical Drive"

on page 23.

5

Remove the keyboard. See "Removing the Keyboard" on page 31.

6

Remove the palm-rest assembly. See "Removing the Palm-Rest Assembly"

on page 35.

7

Remove the display assembly. See "Removing the Display Assembly" on

page 45.

8

Remove the display bezel. See "Removing the Display Bezel" on page 50.

9

Remove the display panel. See "Removing the Display Panel" on page 51.

10

Lift the camera cable off the adhesive tapes on the display cover.

Camera Module 65

1 camera module 2 camera cable

11

Lift the camera module from the alignment posts and remove the camera

module from the display cover.

12

Remove the tape that secures the camera cable to the camera module.

66 Camera Module

1 camera cable 2 camera module

3 adhesive tape

13

Disconnect the camera cable from the connector on the camera module.

Replacing the Camera Module

1

Follow the instructions in "Before You Begin" on page 9.

2

Connect the camera cable to the camera module, and adhere the tape that

secures the cable to the camera module.

3

Align the camera module to the alignment posts in the display cover and

place the camera module in the display cover.

4

Adhere the camera cable to the tapes on the display cover.

5

Replace the display panel. See "Replacing the Display Panel" on page 53.

Camera Module 67

6

Replace the display bezel. See "Replacing the Display Bezel" on page 51.

7

Replace the display assembly. See "Replacing the Display Assembly" on

page 47.

8

Replace the palm-rest assembly. See "Replacing the Palm-Rest Assembly"

on page 38.

9

Replace the keyboard. See "Replacing the Keyboard" on page 33.

10

Follow the instructions from step 5 to step 6 in "Replacing the Optical

Drive" on page 25.

11

Replace the module cover. See "Replacing the Module Cover" on page 16.

12

Replace the battery. See "Replacing the Battery" on page 14.

CAUTION: Before turning on the computer, replace all screws and ensure that no

stray screws remain inside the computer. Failure to do so may result in damage to

the computer.

68 Camera Module